1
p
panying
2
Important Safety
Instructions
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
POWER SUPPLY:
Connect the supplied adapter to the side of the DVD player in the slot marked “Power
In”. Plug the two-prong end of the power cord to an AC100-120V outlet. If you have
difficulty inserting the plug, turn it over and reinsert it; if the unit will not be used for a
long time, disconnect the plug from the outlet.
NOTE:
Before plugging the power cord into an AC outlet, make sure that all the connections
have been made.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric to
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accom
ersons.
the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE.
CAUTION: Laser radiation when open. Do not stare into beam.
3
CAUTION: These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
Refer to service manual for servicing instructions.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use near water.
6) Clean only with dry cloth.
Do not block any ventilation openings. Maintain well ventilated conditions around
7)
the product. Do not put product on bed, sofa or anything that blocks ventilation.
Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of
time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
Note: Do not touch the color TFT LCD screen by hand directly.
Important Safety
Instructions
S
g
4
Important Safety
Instructions
Copyright Protection
This product incorporates copyright protection technology that is protected by U.S.
patents and other intellectual property rights. Use of this copyright protection
technology must be authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
Region code information
DVD players and discs are coded by region. If the region number described on the
DVD disc does not correspond to the region number of this product, this product
cannot play the disc. The region code of this unit is 1.
IMPORTANT FOR LASER PRODUCT
1. CLASS 1 LASER PRODUCT
2. DANGER: Visible laser radiation when open and
interlock failed or defeated. Avoid direct exposure to
beam.
3. CAUTION: Do not open the top cover. There are no
user serviceable parts inside the unit. Leave all
servicin
to qualified service personnel.
A
5
High-quality audio and video
Excellent sound: Dolby Decoder
delivers great sound.
Advanced Playing Functions
Compatibility: Compatible DVD, CD
and JPEG discs, etc.
Particular Performance:
Multi-speed, fast forward, fast
backward, slow playback and
repeated playback.
Other Special Functions
High Resolution: MPEG-2 decoding
format achieves more than 500 lines
of horizontal resolution.
Features
V input: External Audio, Video
input can be connected to most
external AV sources.
AV Outp ut: Analog audio output can
be connected to external amplifier.
On-Screen Display: You can choose
English, French, Spanish, etc. for the
On-Screen Display language.
Last Memory Playback: Memorizes
the stopped playback track and
continues playing the disk from this
spot when the power is kept to
supplied. (Only available for DVD
and CD disc).
Power Adapter Switch:
Automatically adapts to voltage
requirements in U.S and other
countries.
6
Accessories
Accessories List
ITEM NAME QTY
Power Supply Cord with AC Adapter 1
Rechargeable Battery Pack 1
DC Adapter (Car Adapter) 1
Audio/Video Cable 1
Operation Manual 1
：
NOTE
Accessories and their parts numbers are subject to change without prior notice.
7
Important Safety Instructions
Features
Accessories
View of Front Panel
View of Side Panels
View of Bottom Panel
System Connections
Power Supply Preparation
Rechargeable Battery
Notes on Discs
Playback Operation
System Setup
DVD Playback
CD Playback
JPEG Playback
Definition
Troubleshooting
Specifications
Contents
…………………………………….……….2
………………………………………….….5
………………………………………….….6
………………………………………..…...8
…………………………………….………10
…………………………………………....11
……………………………………..
…………………………………..…
……………………………………
……………………………………
……………………………………..……..19
…………………………………………....2
……………………………………
…………………………………….
…………………………………………...
…………………………………………...
……………………………………
………………………………………...…
……..12
……..14
…..…..15
…..…..18
0
……....22
…….. 23
25
31
……... 32
34
8
View of Front Panel
1. LCD screen
7” TFT LCD screen presents high resolution picture.
Speaker
2.
Two speakers output high quality sound.
3. IN / OUT Button
Press to play disc or output AV signal or input external Audio/Video signal.
4.
MENU Button
Press to
5.
SUBT button
Press to change the subtitle language or turn subtitles off.
access the DVD menu during playback
9
6. SETUP Button
Press to access or exit the system setup menu.
7.
AUDIO Button
Press to select different languages.
8. LCD MODE button
Press to enter the brightness, contrast or color adjusting mode.
PLAY/PAUSE Button
9.
View of Front Panel
:Press to pause the playback. Press(PLAY) button to resume normal
10. Button
11. button
12. / + /ZOOM Button
13. // Button
14. // Button
15. ENT/(PLAY) button
16. /- / SLOW Button
17. Charge Indicator
18. Remote Sensor
19. OPEN/PUSH button
20. Disc tray cover
playback.
: Press to stop playback. Then press the (PLAY) button to resume playback
from the stopped spot. Press this button twice to stop playback completely.
: Press to confirm selection.
: Press to select different items.
+: Press the Mode button and then press this button to increase the level of
brightness, contrast and color.
ZOOM: Press to realize various zoom functions
: Press to select different items.
: Press and hold it for several seconds to search backward fast.
: Press to the previous list/track/chapter.
: Press to select different items.
: Press and hold it for several seconds to search forward fast.
: Press to go to next list/track/chapter.
ENT: Press to confirm selection.
(PLAY): Press to start playback.
: Press to select different items.
-: Press the Mode button and then press this button to decrease the level of
brightness, contrast and color.
SLOW: Press to activate slow playback function.
Light is red when the battery is being charged; green when it is fully charged.
Receive the signal from the remote control for operation.
Press to open the disc tray cover.
When the disc is loaded gently press the cover to close it.
10
View of Side Panels
Right Side View
1. Volume Control knob
Used to adjust the volume of the headphone and speaker.
2. Headphone Jack
Used to connect to headphones for private listening. When headphone is plugged,
the speakers will turn off automatically.
3. Audio Input/Output Jack
Press OUTPUT/INPUT button on the front panel to switch to input status, it is
AUDIO input Jack, while switch to output status, it is AUDIO output Jack.
4. Video Input/Output Jack
Press OUTPUT/INPUT button on the front panel to switch to input status, it is
VIDEO input Jack, while switch to output status, it is VIDEO output Jack.
Left Side View
1. DC 9.5/12V Input Jack
Used to connect the DC 9.5/12V adaptor.
2. Power ON/OFF Switch
Switch the power on or off.
11
1. Rechargeable Battery Contacts
For connecting the rechargeable battery pack.
View of Bottom Panel
12
System Connections
z Always ensure that the DVD player, TV and any other electrical equipment to be
connected with are switched off and unplugged from the power supply.
z Ensure that you observe the color coding when connecting audio and video
cables.
Connecting to TV
Follow the drawing below to connect the DVD player to TV's Audio/Video input with
Audio/Video cable.
Connecting to An Amplifier
Refer to your audio equipment's manual before connection.
Follow the drawing below to connect the DVD player to AV amplifier.
13
System Connections
Connecting to External AV Source
The player supports an AV signal input function. Use the audio/video cable to connect
the unit to an external AV signal source such as a DVD, VCR etc. After connecting,
press the IN/OUT button to enter AV Input statement.
NOTE: Noise may occur in speakers when there is an external audio signal input while
playing a DVD disc. Unplug the audio cord to clear the noise.
Connecting to the Headphones
Connect the headphones to the headphone jack on either side of the player.
When headphone is connected, the speakers will automatically turn off.
14
Power Supply Preparation
Using the AC Adapter
The player is supplied with an AC adapter for powering the unit and charging the
battery.
1. Connect AC adapter to the left side of
the DVD player in the jack marked DC
9.5/12V IN as shown on the right.
2. Plug the two-prong end of the power
cord into a grounded electrical outlet.
The power indicator lights red.
Note: 1. Turn player's power off before unplugging.
2. In the case of using the adapter, the LCD screen will be brighter than using the
rechargeable battery.
Using of Car Adapter
The player is supplied with a Car Adapter for powering the unit and charging the battery
in a vehicle.
Connect the car adapter power plug to
the unit's power jack and the other end to
the vehicle’s 12V accessory/cigarette
lighter socket as the right figure.
Attention
¾ Do not operate the unit or view video software while driving a vehicle.
¾ Place the unit in a proper position for viewing.
¾ Detach battery pack when using the AC or car adapter as power source.
¾ Disconnect the player from the Car Adapter when starting the vehicle.
15
Rechargeable Battery
About Rechargeable Battery Pack
Your portable DVD player comes with a lithium ion rechargeable battery that attaches
to the bottom of the DVD player. Charge the battery fully before initial use. Charging
time is normally about 5 hours. A fully charged battery delivers about 3 hours of use but
playing time varies from disc to disc. If the battery will not be used for a long period of
time, charge the battery fully before storage.
Working conditions and precautions for the rechargeable battery
¾ New battery should be fully charged before initial use.
¾ Battery should only be used and charged when temperature is between 32-100F.
¾ Never put the battery in fire or water.
¾ Do not expose the battery to high temperature or store in hot, sunny place.
¾ Maintain well-ventilated conditions around the product to avoid overheating.
Don’t put the product on a bed, sofa or anything that may block ventilation to the
product.
¾ Do not short the battery terminals.
¾ Do not open the battery.
¾ Detach the battery after charging is complete. When charging the battery pack,
the charge light will turn red, when the charging is complete, the light will turn
green.
¾ Detach the battery when it is not in use.
¾ When the charge of the battery is weak, low power indicator will appear on the
LCD screen. The player will turn off automatically about several minutes later.
Warning:
Do not touch any metal object to the battery connectors, as it will put the battery in
standby mode. To exit the standby mode, connect the battery and DVD player to AC or
DC power.
16
Rechargeable Battery
Attaching the Battery Pack
Refer to the following steps for attaching the Battery Pack:
1. With one hand on the DVD Player to prevent it from moving, take the battery and
align the plastic tabs on the battery pack with holes on the player, and push the
battery pack into the DVD Player.
2. Slide the Battery Pack until you hear it click and lock into place.
Charging the Battery Pack
The battery pack must be attached to the DVD player to charge it by using the supplied
AC Power Adapter.
1. Attach the battery pack to the DVD player.
2. Plug the supplied AC Power Adapter into the player’s power jack marked with “DC
9.5/12V IN”, which is located on right side of the DVD Player.
3. Plug the other end of the AC Power Adapter Cord into a household AC Outlet as
shown below:
17
Rechargeable Battery
Detaching the Battery Pack
When being turned off, the DVD Player still consumes some power in standby mode.
This will eventually discharge the battery. If the DVD Player is not going to be used for
long periods of time, the battery pack should be detached.
Make sure the power is turned off before detaching the Battery Pack.
1. Press and hold the Battery Release Tab in the direction of the arrow ① as shown
in Fig.1 below.
2. Slide the Battery Pack gently towards the direction of the arrow ② as shown in
Fig.1 below.
3. Carefully remove the Battery Pack from your player.
18
Notes on Discs
Compatible Disc Formats
DISC LOGO DIAMETER
12cm
DVD
8cm
CD
12cm 74 min
8cm 20 min
PLAYBACK TIME/
PLAYABLE SIDES
133 min (SS-SL)
242 min (SS-DL)
266 min (DS-SL)
484 min (DS-DL)
41 min (SS-SL)
75 min (SS-DL)
82 min (DS-SL)
150 min (DS-DL)
JPEG
Operation methods of some DVD discs are specified by the software manufacturer.
Please follow the instructions of the disc.
12cm
Care of Discs
Holding Discs
When loading or removing discs, try not to touch their playing
surfaces as the right figure.
Cleaning
Fingerprints or stain on the disc may affect the quality of sound and
picture. To clean your discs, use a soft clean cloth to wipe them. If
necessary, moisten a soft cloth with diluted neutral detergent to remove
heavy dirt or fingerprints.
Do not wipe in a circular direction as the figure in the right middle
(concentric scratches on the disc groove tend to cause noise). Gently
wipe from the center of the disc to the outer edge as the right figure.
19
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING
YOUR DVD PLAYER FOR THE FIRST TIME.
WARNING: Do not play poor quality discs to avoid damaging the lens.
Playback Operation
Pre-operation
1. Connect the unit to power supply through the provided AC adaptor.
2. Switch “POWER ON/OFF” to “ON” to turn on the DVD player.
3. Push the OPEN switch on the unit to open the disc tray cover. Put a disc in the
disc tray with printed side up. Close the disc cover. (See below)
4． The player will search disc and play it automatically.
5. Adjust the volume with the VOLUME control on the right panel to the desired level.
6. To turn the player off, switch the POWER ON/OFF on the left panel to OFF.
Basic Operation
LCD MODE
button
ZOOM
Press the MODE button and then press the + button or
- button to adjust brightness, contrast and color of the
screen.
Press the MODE button and hold it for several seconds
to change the aspect ratio among 16:9,4:3 .
For DVD disc, press the ZOOM button to display
the image as 2x-3x-4x-1/2-1/3-1/4-normal size
in sequence.
For JPEG disc, press ZOOM button first, then
press the button to enlarge the picture as
follows: 125%-150%-200%-normal size ; press
the button to reduce the picture as
follows:75%-50%-normal size.
This function is not available for CD disc.
y
20
Playback Operation
DVD Playback
ENTER/ENT
button
PAUSE/
button
STOP/ button
MENU button
& buttons
Load a disc in, the player will search the disc and play it
automatically. Press the direction buttons () to
highlight the item that you want to play and press the
ENTER/ENT button to confirm.
Press the PAUSE/button to pause during playback and
press the PLAY/(PLAY) button to resume normal
back.
pla
During playback, press the STOP/ button once to stop
playback and then press the PLAY/(PLAY)
resume normal playback from the place where the
STOP/ button is pressed. Press the STOP/button
twice repeatedly to stop playback completely.
Press the MENU button during playback. The root menu
will appear on the screen.
Press the direction buttons () to select the item
you wish to play, and press the ENTER/ENT button to
confirm. Or press the 0-9 and +10 buttons to select the
item you prefer directly.
Press the button to go to the previous chapter.
Press the button to play the next chapter.
button to
21
DVD Playback (continued)
& buttons
SLOW button
Press the / button (and hold it for several seconds) to
start fast forward/rewind playback. Press it (and hold it for
several seconds) repeatedly to fast forward/rewind at the
speedof2X, 4X, 8X, 16X, 32X and normal in sequence.
Press the PLAY/(PLAY) button to return to normal
playback.
Press the SLOW button repeatedly and slow playback
will at the speed of 1/2 – 1/4 – 1/8 – 1/16 – normal
playback. During slow playback, press the PLAY/
(PLAY) button to resume normal playback.
Playback Operation
play
22
CD Playback
PAUSE/
button
STOP/ button
& buttons
& buttons
Playback Operation
Press the PAUSE/button to pause during playback.
Press the PLAY/(PLAY) button to resume normal
back.
During playback, press the STOP/ button once to stop
and then press the PLAY/(PLAY) button to resume
normal playback from the place where the STOP/
button is pressed. Press the STOP/button twice
repeatedly to stop playback completely.
Press the / button (and hold it for several seconds)
to play fast forward/rewind. Press it (and hold it for
several seconds) repeatedly, the fast forward/ rewind
playback will be undergoing at the speed of 2X, 4X, 8X,
16X，32X in sequence. Press the PLAY/(PLAY) button
to return to normal playback.
Press the button to play the previous chapter.
Press the button to play the next chapter.
23
Playback Operation
JPEG Playback
Pre-operation
1. Load a JPEG in the disc tray, and the player will search and play disc automatically.
2. The screen displays the root folder with several subdirectories/subfolders. Use the
, buttons to select desired folder. Then press the ENTER/ENT or (PLAY) button
to confirm your selection.
3. The screen enters the selected subfolder with several files. Use the , buttons to
select desired file. Then press the ENTER/ENT or (PLAY) button to confirm your
selection.
4. Press the button to return to previous folder or directory.
Note: Many discs have other items besides pictures.
Buttons Operation
STOP/
button
PAUSE/
button
MENU button
Press the STOP(on the remote control) or (on
the front panel)
currently -playing picture in the way of small pictures.
button to preview the pictures after
Press the PLAY(on the remote control) or ENT (on
the front panel)
Press the PAUSE/button to pause during playback.
Press the PLAY/ENT button to resume normal playback.
Press the MENU button during playback to return to
root folder. Press the PLAY button or ENT (on the
front panel) to resume normal playback.
button to resume normal playback.
24
Playback Operation
Picture CD Playback (continued)
During browsing a picture, you can press direction buttons ,,, to rotate the
current picture.
Press thebutton to rotate the current picture clockwise, as following drawings:
Press thebutton to rotate the current picture anti-clockwise, as following drawings:
Some picture CD discs are restricted by their designing method, and so have no
Note:
rotating, zooming etc. function。
Picture Rotate
25
You can change the default settings of this unit to customize its performance to your own
preference. Read this section to learn how to set up the system.
Note: the system should better be set up in the state that no disc is in the DVD drive or the
unit is on the stop mode.
Follow the steps below to set up your system:
1. Press the SETUP button on the front panel.
2. The setup menu will appear on the screen. It includes General Setup Page, Speaker
setup page, Dolby digital setup, Video setup page, Preference page. You can exit the
setup menu by pressing the SETUP button again at any time during setting.
3. Press the or (direction buttons) on the remote control or on the front panel to
select a sub-menu that you want to set up.
4. Press the or button on the remote control or on the front panel to select the item
that you want to set up in the sub-menu.
System Setup
General Setup Page
The items included in this sub-menu are shown as
the left.
1.TV Display
This item is used to set TV display mode.
Press the or button to highlight this item.
Press the ENT orbutton to enter the item.
It includes Normal/PS, Normal/LB and Wide, Wide
by default. Press the or button to choose the
proper one. Press the ENT button to confirm your
selection. Press the direction button to exit from
this item.
Note: Select Normal/PS or Normal/LB when a 4:3
TV is connected.
Select Wide when a 16:9 wide screen TV is
connected.
26
System Setup
General Setup Page
2.Angle Mark
This item is used to turn the Angle Mark on or off.
Press the or button to highlight this item.
Press the ENT or to enter the item.
Press the or button to choose angle mark on
or off.
Press the ENTER button to confirm your selection.
Press the direction to exit this item.
3.OSD Language
This item is used to set the OSD (on-screen
display) language. Press the or button to
highlight this item. Press the ENT or to enter the
setup of this item.
It includes English, French, Spanish.. English by
Default.
Press the or button to choose the proper one.
Press the ENT button to confirm your selection.
Press the direction button to exit this item.
4.Screen Saver
This item is used to turn the screen saver on or off.
Press the or button to highlight this item.
Press the ENT or to enter the setup of this item.
The default setting of this item is on.
Press the or button to choose on or off.
Press the ENT button to confirm your selection.
Press the direction button to exit this item.
5. Last Memory
This item is used to set last memory state.
Note: The last memory refers to resume playback
from the point that you stopped last time.
Press the or button to highlight this item.
Press the ENT or to enter the item.
The default setting of this item is off.
Press the or button to choose on or off.
Press the ENT button to confirm your selection.
Press the direction button to exit this item.
27
Speaker Setup Page
Dolby Digital Setup
System Setup
The item included in this sub-menu is shown as the
left.
1.Downmix
This item is used to set downmix mode.
Press the or button to highlight this item.
Press the ENTER or to enter the item.
It includes Lt/Rt and stereo, stereo by default.
Note: The function of Lt/Rt is to output mixed audio
in the format provided by Dolby. The function of
stereo is to output stereo signal.
Press the or button to choose the proper one.
Press the ENT button to confirm your selection.
Press the direction button to exit this item.
The items included in this sub-menu are shown as
the left.
1. Dual Mono
This item is used to set the channel output mode.
Press the or button to highlight this item.
Press the ENT or to enter the item.
It includes stereo, L-Mono, R-Mono and Mix-Mono,
Stereo by default.
Press the or button to choose the proper one.
Press the ENT button to confirm your selection.
Press the direction button to exit this item.
28
System Setup
Video Setup Page
2.Dynamic
This item is used to adjust linear dynamic
compression rate to get different signal
compression Effects.
Press the or button to highlight this item.
Press the ENT or to enter the setup of this item.
Then the item will show as the left.
Press the or to choose the proper level.
Press the ENT button to confirm your selection.
Press the direction button to exit this item.
The items included in this sub-menu are shown as
the left.
1.Sharpness
This item is used to adjust the sharpness of the
Screen.
Press the or button to highlight this item.
Press the ENT or to enter the item.
It included High, Medium and Low, Low by default.
Press or button to choose the proper one.
Press ENT button to confirm your selection.
Press direction button to exit this item.
2. Brightness
This item is used to adjust brightness level of the
Screen.
Press the or button to highlight this item.
Press the ENT or to enter the item.
Press the
The default level is 00.
Press the ENT button to confirm your selection.
or button to adjust to desired level.
29
Preference Page
System Setup
3. Contrast
This item is used to adjust contrast level of the
Screen.
Press the or button to highlight this item.
Press the ENT or to enter the item.
Press the
The default level is 00.
Press the ENTER button to confirm your selection.
The items included in this sub-menu are
Shown as the left.
Note: This sub-title can only appear in the state
that no disc is in the DVD drive.
1. Audio
This item is used to set the audio output language.
Press or button to highlight this item.
Press the ENT or button to enter the item.
The available languages are English, French,
Spanish, Chinese, Japanese, Korean, Russian and
Thai, English by default.
Press the or button to choose the preferred
Language.
Press the ENT button to confirm your selection.
Press thebutton to exit this item.
2. Subtitle
This item is used to set the subtitle language.
Press the or button to highlight this item.
Press the ENT or button to enter the item.
The available languages are English, French,
Spanish, Chinese, Japanese, Korean, Russian and
Thai, Off by default.
Press the or button to choose the preferred
Language.
Press the ENT button to confirm your selection.
Press the direction button to exit this item.
or button to adjust to desired level.
30
System Setup
3. Disc Menu
This item is used to set the language of disc menu.
Press the or button to highlight this item.
Press the ENT or button to enter the item.
The available languages are English, French,
Spanish, Chinese, Japanese, Korean, Russian and
Thai, English by default.
Press the or button to choose the preferred
Language.
Press the ENT button to confirm your selection.
Press the direction button to exit this item.
4. Default
This item is used to reset the unit.
Press the or button to highlight this item.
Press the ENT or button to enter this item.
Press the ENT button to reset.
Then all the settings of your unit will return to the
Original status.
31
Definition
Letterbox screen
This refers to a screen on which the playback picture of wide-screen DVDs appears with
black bands running along the top and bottom.
Pan & Scan screen
This refers to a screen on which the playback picture of wide-screen DVDs is cut off at the
left and right sides.
Title, Chapter (DVD)
DVDs are divided into some large sections (titles) or some small sections (chapters). Each
section is numbered: these numbers are called Title number or Chapter number.
Title 1 Title 2
Chapter1 Chapter 1
Chapter2
…… ……
Track (CD)
CDs are divided into some sections (tracks). Each section is numbered; these numbers are
called Track number.
Track 1 Track 2 Track 3 ……
JPEG
JPEG is a common picture format that
has small file size and low quality loss
rate of picture. Hundreds of pictures can
be stored in a disc in this format. In
order to utilize real digital album, use film
to make a Picture CD in JPEG format.
32
If you suspect there is something wrong with the DVD player, immediately turn the power off.
Disconnect the power connector and check that there is no smoke or excessive heat coming
from the unit.
Never open or try to repair the unit yourself. There are no user serviceable parts inside.
PROBLEM
The player cannot
play.
There is no sound .
POSSIBLE CAUSE
The disc cover may not be
closed.
There may be no discs in
the DVD drive.
The disc may not be put in
in the right way.
The disc may be dirty or
warped.
The player's region code
may not as the same as the
region code of DVD disc.
There may be water on the
lens.
The system connection may
be not correct.
The speakers may be
turned down.
The sound setup of the DVD
disc may be not correct.
The disc may be dirty or
warped.
Troubleshooting
POSSIBLE SOLUTION
Close the disc cover.
Put a disc in to the DVD drive.
Put the disc in with the label
side up.
Clean or change the disc.
Make sure the player's
region code is the same as
the region code of DVD
disc.
Remove the disc and keep
the player being powered off
for at least two hours.
Connect the system
correctly.
Turn on the speaker.
Setup the sound of the DVD
correctly.
Clean or change the disc.
33
Troubleshooting
PROBLEM
There is no picture.
Poor AV performance.
The remote control
does not work
POSSIBLE CAUSE
The LCD may be not in
correct video mode.
The system connection may
be not correct.
The unit may be not in AV
out mode.
The disc may be dirty or
warped.
There may be some
obstructions between the
remote control and the
player.
The remote control may not
be pointed at the player.
The batteries of remote
control may not be inserted
correctly.
The batteries of remote
control may be out of power
or weak.
Other possibilities:
Static or other external interference may cause the player function abnormally. In order to
recover normal status, please unplug the power-supply cord and then plug it into the outlet
again to reset the player. If the problems still exist, please cut off the power supply and
consult your service center or the qualified technician.
POSSIBLE SOLUTION
Choose the correct video
mode.
Connect the system
correctly.
Switch AV IN/OUT on the
right panel to OUT.
Clean or change the disc.
Remove the obstruction
between the remote control
and the player.
Point the remote control at
the player directly.
Make sure the polarity of
each battery is correct.
Replace the batteries.
34
TFT screen size
8 inches (16：9)
Screen resolution 480x234
Laser Wavelength 780/650nm
Video System NTSC
Frequency Response 20Hz-20kHz ±2.5dB
Audio Signal-to-noise Rate ≥90dB
Audio distortion + noise ≤ -70dB (1kHz)
Channel Separation ≥70dB (1kHz)
Dynamic Range ≥80dB (1kHz)
Audio Out Out Level 2V±
Specifications
0.2
1.0
, Load 10kΩ
Video Out
Out Level 1V
Unbalanced Negative
±0.2, Load 75Ω
P-P
Power AC100～120V（50Hz）
Dimensions 205mm x 153mm x 41mm
Weight Approximate 1.12 Kg
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works.
Manufactured under license from Dolby Laboratories.
© 1992 -1997 Dolby Laboratories, Inc.
All rights reserved.
For service, support and warranty information, visit www.elementelectronics.com.
Loading...