Element ELEFJ243, ELCFT262, ELEFJ321 Instruction Manual

32 Full HD Digital LED TV

Instruction Manual

Read all of the instructions before using this TV and keep the

manual in a safe place for future reference.

ELEFC321

Important Safety Instructions

Read these instructions – All the safety and operating instructions should be read before this product
is operated.

Keep these instructions – The safety and operating instructions should be retained for future reference.
Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
Follow all instructions – All operating and use instructions should be followed.
Do not use this apparatus near water – The appliance should not be used near water or moisture –for

example, in a wet basement or near a swimming pool, and the like.

Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with
one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles,
and at the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,

or sold with the apparatus. When a cart or rack is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.

Unplug the apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any

way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Please keep the unit in a well-ventilated environment.
WARNING˖To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The

apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases,
shall not be placed on apparatus.
WARNING: The wall socket plug is used as disconnect device, the disconnect device shall remain readily
opera

ble.

WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.


- This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.

- Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user -serviceable
parts inside. Refer servicing to qualified personnel.

- The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance instructions in the literature accompanying the appliance.
 This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way

that it does not require a safety connection to electrical earth.

2

Contents

Caution. ............................................................... 3

Safety Information . . . ................................................... 4

What’s Included . . . ..................................................... 5

Getting Started . ...................................................... .6-7

Front / Rear View. . . . . . . ...........................................6-7

Wall Mounting. ..................................................... 7

Connecting to External Devices ........................................... 8

Remote Control Key Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............. 9-10

Operating Your Television ..............................................11-20

Select Your Onscreen Language Preference . . . . . . . . . . . . . . . . . . . . . . .....12

Navigating the Onscreen Display. . . . . . . . . . . ...........................13

Choosing a TV Channel .............................................13

Selecting Input Source ..............................................14

Picture Menu Options

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Audio Menu Options

.......................................................

15

Time Menu Options . . . .............................................15

Setup Menu Options

...................................................

16
Lock Menu Options

.......................................................

17-18

Channel Menu Options

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19-20

USB Multimedia Operation

...............................................

21

Troubleshooting .................................................... 22-24

FCC.................................................................. 25

Specifications . . . ...................................................... 25

Setup Wizard

.....................................................

11

3

Caution

The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

The lightning flash with arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the products enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to the persons.

4

Safety Information

To ensure reliable and safe operation of this equipment, please read carefully all the instructions
in this user guide, especially the safety information below.

Electrical safety

 The TV set should only be connected to a main power supply with voltage that matches the

label at the rear of the product.

 To prevent overload, do not share the same power supply socket with too many other

electronic components.

 Do not place any connecting wires where they may be stepped on or tripped over.
 Do not place heavy items on them, which may damage the leads.
 Hold the main plug, not the wires, when removing from a socket.
 During a thunderstorm or when not in using the television for long periods, turn off the

power switch on the back of the television.

 Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist

areas, such as bathrooms, steamy kitchens or near swimming pools.

 Pull the plug out immediately, and seek professional help if the main plug or cable is

damaged, liquid is spilt onto the set, if accidentally exposed to water or moisture, if
anything accidentally penetrates the ventilation slots or if the set does not work normally.

 Do not remove the safety covers. There are no user serviceable parts inside. Trying to

service the unit yourself is dangerous and may invalidate the product’s warranty. Qualified
personnel must only service this apparatus.

 To avoid battery leakage, remove exhausted batteries from the remote control, or when not

using for a long period.

 Do not break open or throw exhausted batteries on a fire.

Physical safety

 Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but

ensure at least 5cm (2”) clearance all around.

 Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care

of the remote control.

 To clean the TV use a soft dry cloth. Do not use solvents or petroleum based fluids.
 Do not install near any heat sources such as radiators, heat registers, stoves or other

apparatus (including amplifiers) that produce heat.

 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong, the wide blade, or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.

 Protect the power cord from being walked on or pinched particularly at plugs.
 Unplug the apparatus during lightning storms or when unused for long periods.
 Refer all servicing to a qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled, or objects have fallen into the apparatus, has been exposed to rain or moisture,
does not operate normally, or has been dropped.

 Please always connect your television to a power outlet with protective ground connection.

5

What’s Included

Unit and Accessories

TV Set

User’s Manual

Quick Start Guide

Warranty card

Remote control with batteries

32 Full HD Digital LED TV

Instruction Manual

Read all of the instructions before using this TV and keep the

manual in a safe placefor future reference.

ELEFC321

620

20

Connecting to External Devices

8

TV setup menu button

9

Remote Control Key Functions

If there is light around the TV, the remote control may fail or work abnormally.

Remote control function keys to practice prevail.

If not using the remote for a long period of time, please remove the batteries.

Power button

Numeric buttons

Signal source selection button

ASPECT button

Information button

Play / Pause button

Rewind button

Prev button

Forward button

NEXT button

CH.LIST button

FREEZE button

Stop button

FAV button
REPEAT button

EPG button
CC button

V-CHIP button

AUTO button

ADD / ERASE button

Picture mode button SLEEP button

MTS button

Sound mode button

Return channel button

Mute button

Channel selection button Volume adjust button

Exit the OSD menu button

ENTER button
RIGHT button

Down button

Channel setup button

UP button

LEFT button

10

Remote Control Key Functions

79$9&RPSRQHQW+'0,+'0,+'0,9*$86%

:LGH=RRP&LQHPD1RUPDO

REPEAT

3UHVV5(3($7EXWWRQWRVHOHFWWKHUHSHDWPRGHZKHQSOD\PXVLFLQ86%VRXUFH

11

If you are turning on your LED TV for the first time, you will see the following menu below.
Please select Home Mode or Standard Mode to continue.

Home Mode (Energy Saving): Select Home Mode to maximize energy efficiency. Please note
if you select Home Mode the picture will be darker. This mode meets the requirements of
Energy Star qualification.
Standard Mode: Select Standard Mode if you would like your picture to be brighter. At times
this mode may use more energy to operate the Volume/Sound mode and the Picture Mode.
In this setting ,the power consumption may possibly exceed the limited requirement of the
Energy Star qualification.

Press Yes to confirm.

Operating Your Television

Basic Operations
Turning Your TV On and Off

TURN ON LED TV

1. Connect to power with the main power cable, at this time the TV will enter STANDBY mode
and the LED will be red.

2. From the STANDBY mode, use the POWER button either on the main unit or on the remote
to turn your television on.

TURN OFF LED TV

From ON mode, use the POWER button either on the main unit or on the remote to turn your
television to STANDBY mode.

Setup Wizard

Exit

R

R

Home Mode(Energy Saving)

Yes

12

Operating Your Television

Select Your Onscreen Language Preference

Note: Select the language which will be used for displaying menus and information boxes.

 Press button to select Menu Language. .
 Press

/ button to select your desired language.

 When you are satisfied with your choice, press the EXIT to exit.

Volume Adjustment

1. Press VOL +/- to adjust the volume

2. If you want to switch the sound off, press the MUTE

, Press again to resume.

/

Setup Wizard

Menu Language

Air/Cable

Cable System

Auto Scan

English

Cable

AUTO

Select

Move

Exit

ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental
Protection Agency(EPA).
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S.
Department of Energy helping us all save money and protect the environment through energy
efficient products and pratices.

Note: If you want change the modes between Home Mode(Energy Saving) and Standard Mode,
you can change the setting in the Setup Menu under Display Mode.

R

Return

R

13

Operating Your Television

Navigating the Onscreen Display

 Press the MENU button to display the main menu.
 Use buttons to navigate and select the available menus.

Choosing a TV Channel

1. Use the CH+/CH- on the front panel or on the remote control.

 Press CH+ to increase the channel.
 Press CH- to decrease the channel.

2. Using 0-9 remote keys.
Enter the channel number with the 0-9 remote keys, then press “OK” to select the channel.
For example:

1. Press 4, then press “

OK” to select channel 4.

2. Press 4, then press 5, then press “

OK” to select channel 45.

3. Press 1, then press 2, then press 1, finally press “

OK” to select channel 121.

AUTO

/

Picture Mode

Contrast

Brightness

Color

Standard

Normal

Select

Move

Exit

Picture

Audio

Time

Setup

Lock

Channel

Tint

Sharpness

Color Temp.

Blue Screen On

50

50

50

50

0

Sleep Timer

Time Zone

Daylight Saving Time

Select

Move

Exit

Picture

Audio

Time

Setup

Lock

Channel

Off

Pacific

Off

Enter Password

Select

Move

Exit

Picture

Audio

Time

Setup

Lock

Channel

----

Air/Cable

Auto Scan

Favorite

Select

Move

Exit

Picture

Audio

Time

Setup

Lock

Channel

Show/Hide

Channel No.

Channle Label

DTV Signal:

Cable

Sound Mode

Bass

Treble

Select

Move

Exit

Picture

Audio

Time

Setup

Lock

Channel

Balance

Surround Sound

Auto Volume

SPDIF Type

Off

On

RAW

Standard

50

50

0

Audio Language English

Menu Language

Transparency

Zoom Mode

Noise Reduction

SelectMove Exit

Picture

Audio

Time

Setup

Lock

Channel

Advanced

Closed Caption

DLC

Display Mode

On

English

Off

Wide

Middle

Restore Default

Home Mode

14

Operating Your Television

Selecting Input Source

Picture Mode

Select the type of picture which best corresponds to your viewing preferences by selecting Picture Mode in
the PICTURE menu. You may select the picture mode directly by pressing the P.MODE button on the
remote control.

Brightness

Press / and then use / to adjust the brightness of the picture.

Contrast

Press / and then use / to adjust the contrast of the picture.

Color

Press / and then use / to adjust the color of the picture.

Sharpness

Press / and then use / to adjust the sharpness of the picture.

Color Temp.

Press to select mode, Cool, Warm, Normal.

/

Tint

Press / and then use / to adjust the tint of the picture.

Blue Screen

Press and then use to select On or Off./ /

INPUT SOURCE

TV

AV
Component
HDMI1
HDMI2
HDMI3
VGA
USB

Picture Mode

Contrast

Brightness

Color

Standard

Normal

SelectMove Exit

Picture

Audio

Time

Setup

Lock

Channel

Tint

Sharpness

Color Temp.

Blue Screen On

50

50

50

50

0

You can display the input screen menu by pressing SOURCE on the
remote control or SOURCE at the side of the panel, press / button to
select, press “OK” to confirm.

Picture Menu Options

Press the MENU at the side of the panel or MENU on the remote control and then use to move the

PICTURE menu, press or OK to enter (see picture below).

/

15

Operating Your Television

Audio Menu Options

Sound Mode

Balance

Press / and then use / to adjust the audio output between left and right speakers.

Bass

Press and then use increase or decrease the level of the
lower-pitched sounds.

/ /

Treble

Press and then use to increase or decrease the level of
higher-pitched sounds.

/ /

Surround Sound

Press / to switch surround sound On or Off.

Audio language

Press

/

to switch auto volume control On or Off.

s volume to be controlled automatically.

Auto Volume

This function allow

SPDIF Type

Press / to select between PCM or RAW.

Press

/ to select audio languages among: English, French, Spanish.

Sleep Timer

Press and then use to set up the sleep timer among: Off,
5Min, 10Min, 15Min, 30Min, 45Min, 60Min, 90Min, 120Min, 180Min
or 240Min.

/ /

Time Zone

Press / and then use / to set up the time zone among: Pacific,

Daylight Saving Time

Press / and then use / to set up the daylight saving time

Alaska, Hawaii, Eastern, Central or Mountain.

Press and then use to select User, Standard, Music and Movie.

/ /

On or Off.

Sound Mode

Bass

Treble

Select

Move

Exit

Picture

Audio

Time

Setup

Lock

Channel

Balance

Surround Sound

Auto Volume

SPDIF Type

Off

On

RAW

Standard

50

50

0

Audio Language

English

Sleep Timer

Time Zone

Daylight Saving Time

Select

Move Exit

Picture

Audio

Time

Setup

Lock

Channel

Off

Pacific

Off

Press

MENU

at the side of the

panel or

MENU on the remote control and then use to move the

AUDIO

menu, press or OK to enter (see picture below).

/

Time Menu Options

Press the MENU

at the side of the

panel or

MENU on the remote control and then use to move the

TIME menu, pr

ess or

OK to enter (see picture below).

/

16

Operating Your Television

Menu Language

Press and then use to select menu language among: English,
Français or Español.

/ /

Transparency

Press and then use to turn on or off the transparency function.

/ /

Zoom Mode

Press and then use to select the zoom mode among: Wide, Zoom, Cinema or Normal.

/ /

Noise Reduction

Press and then use to select the noise reduction mode among: Weak, Middle, Strong, Off.

/ /

CC Mode

Basic Selection

Advanced Selection

Option

Select

Move Return

Picture

Audio

Time

Setup

Lock

Channel

CC1

Off

Service1

H-POS

V-POS

Clock

Phase

Adjust

Move Return

Picture

Audio

Time

Setup

Lock

Channel

Auto

50

50

50

50

Are you sure?

Yes

Select

Move

Return

Picture

Audio

Time

Setup

Lock

Channel

No

DLC

Press

/ and then use / to dynamic luminance control On or Off.

Restore Default

Select “Restore Default”, press

OK, and it will display “Are you sure?”,

select

“Yes” to select the factory default settings.

Display Mode

Press

/ and then use / to select Home Mode and Standard Mode.

Mode

Font Style

Font Size

Select

Move Return

Picture

Audio

Time

Setup

Lock

Channel

Default

Custom

Default

Menu Language

Transparency

Zoom Mode

Noise Reduction

SelectMove Exit

Picture

Audio

Time

Setup

Lock

Channel

Advanced

Closed Caption

DLC

Display Mode

On

English

Off

Wide

Middle

Restore Default

Home Mode

Font Edge Style

Default

Font Edge Color

Default

FG Color

Default

BG Color

Default

FG Opacity

Default

BG Opacity

Default

OPTION

Press and then use to enter into the following menu.
Press and then use to select.

/
/

/

Setup Menu Options

Press the MENU

at the side of the

panel or

MENU on the remote control and then use to move the

menu, press or OK to enter (see picture below).

/

SETUP

17

Operating Your Television

Lock Menu Options

Use the DOWN button to highlight the “Enter Password”item, use the numeric keys to input 4-digital
password, then the screen will display the junior menu. After settings, press menu button to exit.

NOTE: The factory password is 0000.

Input

4-digital password

Change Password

Use DOWN button to select the “Change Password” item, then press
RIGHT button to enter into the following menu.Input the new 4-digital
password and input it again to confirm.

System Lock

Allows you to turn on or off the system lock.If you turn off the system
lock, then the following items(US, Canada, RRT Setting and Reset RRT)
will unable to use.

US

Use Down button to highlight the “US”item, then press RIGHT button to
enter into the following menu.

Canada

Use Down button to highlight the “Canada” item, then press RIGHT button
to enter into the following menu.

RRT Setting

Rating Region Table setting.

Reset RRT

Allows you to reset the RRT setting.

Canada English

Use LEFT and RIGHT buttons to select among: E, C, C8+, G, PG,
14+ and 18+.

Canada French

Use LEFT and RIGHT buttons to select among: E, G, 8ans+,
13ans+, 16ans+ and 18ans+

Change Password

System Lock

US

Next

Move Return

Picture

Audio

Time

Setup

Lock

Channel

Canada

RRT Setting

Reset RRT

Clear Lock

Off

Enter New Password

Confirm Password

0-9 Return

Picture

Audio

Time

Setup

Lock

Channel

----

----

Canada English

Canada French

Picture

Audio

Time

Setup

Lock

Channel

E

E

Select

Move Return

Enter Password

Select

Move

Exit

Picture

Audio

Time

Setup

Lock

Channel

----

Press the MENU

at the side of the

panel or

MENU on the remote control and then use to move the

menu, press or

OK to enter (see picture below).

/

LOCK

18

Operating Your Television

Parental Control

Press Enter to enter the sub-menu and then use the 0-9 to enter the correct password: 0,0,0,0. If used, this option feature can
“block” undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings
that restrict or “block” the programming that can appear on the TV. Parental Control allows the user the capability of defining which
program rating they consider acceptable, to the younger more sensitive viewer. It can be preset and turned either on or off by the
user who specifies the secret 4-number code, the password. The number of hours blocked are specified. General audiences and
children blocks should be both programmed into the TV’s memory. Viewer ratings are specified for both TV and the motion picture
industry; both rating systems should be used, for complete coverage. The ratings are based on the ages of children.

Overview

To ensure complete coverage for all TV programs, (movies and regular TV shows) choose a rating for MPAA, from the selections
below, as well as ratings from the TV Parental Guidelines Rating Systems below, using the Age Block option for General Audiences,
and for children. In addition to those, you may wish to add additional restrictions from the content block menu, and submenus
examples below.

Things to Consider before Setting up Parental Control

Determine which rating you consider acceptable to the viewer. (For example, if you choose TV-PG, more restrictive ratings will be
automatically blocked; the viewer will not be able to see: TV-PG, TV-14, or TV-MA rated programming.) Do you want to block the
auxiliary video source entirely? (Blocks the signal sent by the equipment, such as VCR, connected to the TV Audio/Video input jacks)
Or leave unblocked, then choose allowable ratings. Block program “Content” based on individual parameters such as: Strong Dialog,
Bad Language, Sex Scenes, Violence Scenes, or Fantasy. Violent Scenes; in Content Blk option. Select a secret password, in the Set
Password option, using the numbers keys on the remote. Do not forget the password, it is the only way you can access the Parental
Control menu and change rating selections, or turn Parental Control off. Do you want the Parental Control to be active at all times? If
not, you can turn it on or off with the Lock On/Off option.

 You can set different Parental Control viewing restrictions for general audiences and for children, both can be active at the same time.
 Simply specifying one content block such as Sex Scenes, will not automatically restrict the programming that appears from the video sources.
 Even if you choose to leave the AUX inputs unblocked, the ratings you specify will automatically restrict the programming that appears from

the video sources.

 You can not disable Parental Control by disconnecting the TV from power. Block hours will be automatically reset to the original block time

setting specified if power is disconnected.

Information

Motion Picture Association of America (MPAA) Rating System

Grade Meaning

G General Audiences Content not offensive to most viewers

PG Parental Guidance Suggested Content is such that parents may not want their children to view the program

PG-13 Parental Guidance Strongly

Cautioned

Program is inappropriate for preteens, with a greater degree of offensive material suggested than a PG
rated program

R Restricted viewing Not for children under 17, Strong element of sex and/or violence

NC-17 No Children Under age 17 Not for children under 17 under any circumstances. Strong sexual content

X Hard Core Films Same as NC-17 rating

No Rating No Rating MPAA Not Rated

TV Parental Guideline Rating System

Grade Meaning

TV-Y Young Children Content not offensive to most viewers

TV-Y7 Children 7 and over Considered suitable for children over 7, may contain Fantasy Violence Scenes

TV-G Parental Audience Considered suitable for all audiences; children may watch unattended

TV-PG Parental Guidence Suggested Unsuitable for younger children, may contain; Suggestive Dialogue, Bad Language, Sex, and Violence Scenes

TV-14 Parents Strongly Cautioned Unsuitable for children under 14, may contain: Strong Dialogue, Bad Language, Sex, and Violence Scenes

TV-MA Mature Audience Only Adults only, may contain Strong Dialogue, Bad Language, Sex, and Violent Scenes

Canadian Rating: Canadian English is used throughout all English-speaking Canada (C, C8+, G, PG, 14+, 18+).

Canadian French is used in Quebec (G, 8 ans+, 13 ans+, 16 ans+, 18 ans+)

Note: The V-Chip will automatically block certain categories that are “more restrictive”. If you block TV-Y

category, then TV-Y7 will be automatically blocked. Similarly, if you block TV-G category, then all the categories
in the “young adult” will be blocked (TV-G, TV-PG, TV-14, and TV-MA).

19

Operating Your Television

Channel Menu Options

Air/Cable

Allows you to select antenna between Air and Cable.

If you select “Air”as input signal in Antenna item, you can press RIGHT
button to search the channels automatically.

The receivable channels will be stored automatically.When searching
channels, press MENU to stop.

If you select “Cable”as input signal in Antenna item, allows you to select

Cable System among: Auto, STD, IRC and HRC.Use DOWN button to

highlight the “Start to Scan”, then press RIGHT button to search the

channels automatically.The receivable channels will be stored

automatically. When searching channels, press MENU to stop.

Auto Scan

Use Down button to highlight the “Auto Scan” item, then press RIGHT
button to enter into the following menu.

Favorite

Allows you to add these channels which you desired as the favorite channels.
Use UP or DOWN button to highlight the “Favorite”item, then press RIGHT
button to enter into the following menu.
Use UP and DOWN button to highlight the desired item, then press OK button
to add or remove the highlighted channel as favorite.

Cable System

Start to Scan

Picture

Audio

Time

Setup

Lock

Channel

AUTO

Select

Move Return

Picture

Audio

Time

Setup

Lock

Channel

RF CH : 50
Found : 0

Next

Move Return

Air/Cable

Auto Scan

Favorite

Select

Move Exit

Picture

Audio

Time

Setup

Lock

Channel

Show/Hide

Channel No.

Channle Label

DTV Signal:

Cable

Press the MENU

at the side of the

panel or remote control and then use to move the

CHANNEL menu.

Press or OK to enter (see picture below).

/

Operating Your Television

20

Show / Hide

Allows you to show or hide the channels.
Use UP or DOWN button to highlight the “Show / Hide” item, then
press RIGHT button to enter into the following menu.

Use UP and DOWN button to highlight the desired item, then press
OK button to show or hide the highlighted channel.

Channel No.

Display the number of current channel.

Channel Label

Display the label of current channel.

DTV Signal:

Display the quality of current DTV signal.

50-1

50-2
50-3

Picture

Audio

Time

Setup

Lock

Channel

KOCE-HD

Press’OK’Change

Move Return

Channel

Channel Name

Favorite

KOCE-SD
KOCE-LB

USB Multimedia Operation

21

Multimedia Operation: Music

USB

C:

Photo Music

C:\MP3\

..

U01-1.mp3
U01-2.mp3
U01-3.mp3
U02-1.mp3

Play File :0

Select Move Repeat

001/005
Total size:3.8 GB
Unused size:3.7 GB

..

Title:
Artist:
Album:
Year:
Bit Rate: 0kbps

Stop
00:00 00:00

USB

C:

Photo Music

C:\PICTURE\

..

2010100.jpg

2010101.jpg

2010102.jpg

2010103.jpg

Play File :0

Select Move Repeat

002/005
Total size:3.8 GB
Unused size:3.7 GB

2010100.jpg

1024 x686 229.0KB

Multimedia Operation: Photo

JPEG

rewind

selected with buttons.

p

22

Troubleshooting

If your television does not operate normally or does not turn on, please check the following
troubleshooting questions. Remember to also check the other connected electronic devices, such as DVDs
or Blu-ray players to pinpoint any problem. If the television still fails to operate normally, please contact
technical support (refer to Warranty page).

SYMPTOM POSSIBLE CAUSE REMEDY

Dead. No LED lit No power to the TV. Check all connections to the TV’s AC socket.

Dead. No LED lit red Set in standby mode.

Press either the Power button or the Standby button
on the remote control.

Blue screen

No signal.

Press SOURCE button to select the correct source

Incorrect source selected.

Noisy, snowy, ghosting
picture (TV)

Poor antenna signal.

If using an indoor antenna, try adjusting the antenna
postion. Check antenna connections

No sound

.FFO”etuM“dnuosnruT.”etuM“dnuoS

Volume set too low. Check volume settings.

External leads not connected
“if used”.

Check that all external leads are connected properly.

23

Troubleshooting

Before contacting the service technician, perform the following simple checks. If any problem still persists,
unplug the LED TV and call for assistance.

PROBLEM POSSIBLE SOLUTION

No sound and picture - Check that the main plug has been connected to a wall

outlet

- Check that you have pressed the POWER button on the
front of the TV set

- Check the picture contrast and the brightness setting

Red LED indicator light Set in standby mode. Press either the POWER button or

the Standby button on the remote control

Normal picture but no sound - Check the volume

- Sound muted? Press the MUTE button

- Try another channel, the problem may be with the
broadcast

- Are the audio cables installed properly?

The remote control does not work - Check to see if there are any objects between the TV

and remote control causing obstruction

- Are batteries installed with correct polarity (+ / -)

- Correct remote operating mode set: TV, VCR, etc?

- Install new batteries

Power suddenly turns off - Is the sleep timer set?

- Check the power control settings. Power may be
interrupted

- No broadcast on the station tuned

Picture appears slowly after switching on - This is normal, the image is muted during the product

start up process. Please contact a service provider if
the picture has not appeared after 5 minutes

Poor Color or picture - Adjust the color in Menu option

- Keep a sufficient distance between the product and the
VCR

- Try another channel, the problem may be with the
broadcast

- Are the VIDEO cables installed properly?

- Activate any function to restore the brightness of the
picture

Horizontal/vertical bars or picture shaking - Check for local interference, such as an electrical

appliance or power tool

Blue Screen - Press SOURCE button to select correct source

Poor reception on some channels - Station or cable experiencing problems. Tune to

another station

- Station signal is weak, reorient antenna to receive better
reception

- Check for sources of possible interference

Lines or streaks in pictures - Check the antenna (change the direction of the

antenna)

No output from one of the speakers - Adjust balance in the Menu option

24

Troubleshooting

NOTE: When there is a problem in VGA mode (only when VGA mode is applied)

PROBLEM POSSIBLE SOLUTION

The signal is out of range - Adjust resolution, horizontal frequency, or vertical

frequency

- Check whether the signal cable is connected or loose

- Check the input source

Vertical bar or stripe on background, horizontal noise and
incorrect position

Set the auto configure or adjust clock, phase or H/V
position

Screen Color is unstable or is a single Color - Check the signal cable

- Re-install the PC video card

Maintenance

Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will
have with your new TV. Be sure to turn the power off and unplug the power cord before you begin any
cleaning.

Cleaning the screen

1. A great tip to dust off your screen. Wet a soft cloth in a mixture of lukewarm water and a little fabric
softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use to wipe the
screen.

2. Make sure the excess water is off the screen, then let air-dry before you turn on the TV.

Cleaning the Cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet
cloth.

Extended Absence

If you expect to leave your TV dormant for a long time (such as a vacation), it is a good
idea to unplug the power cord to protect against possible damages from lightning or
power surges.

25

The FCC Wants You To Know

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed or
used in accordance with the instructions, may cause harmful interference to radio communica­tions. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: 1) reorient or relocate the receiving an­tenna; 2) increase the separation between the equipment and the receiver; 3) connect the equip­ment to an outlet on a circuit different from that to which the receiver is connected;

4) consult the dealer or an experienced radio/TV technician for additional
suggestions.

Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. Where shielded interface cables have
been provided with the product or specified additional components or accessories elsewhere de­fined to be used with the installation of the product, they must be used in order to ensure com­pliance with FCC regulation.

Canadian DOC statement
Standard Television Receiving Apparatus Canada BETS-7
This Class B digital apparatus complies with Canadian ICES-003.

Specifications

yllanogaidsehcni

32eziSlenaP

DELepyTyalpsiD
TFTygolonhceTlenaP

zH60zH021svzH06lenaP

P0801noituloseRyalpsiD

p0

801otpuelbitapmoCDH

1080x1920noituloseRlenaP

9:61oitaRtcepsA

4,000:1lenap-Dynamic Contrast Ratio

Brightness (Centre Typ.) cd/m2 350

8.5 ms)GotG(emiTesnopseR
sruoh0000,3)sruoH.pyT(

efiLpmaL
Horizontal Viewing Angle (At CR>10) 176
Vertical Viewing Angle (At CR>10) 176

This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential
adverse effects on the environment and human health.
Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a
consumer, you are responsible for ensuring that this product is disposed of properly. To find out how to properly dispose of this product,
please go to www.elementelectronics.com and click on Sustainability.

This TV incorporates High-Definition Multimedia Interface (HDMI ) technology. HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI Licensing LLC.

TM