Elektralite LED Pro Line
eyeBall
DMX channel assignments and Menus
Elektralite is a division of Group One,
70, Sea Lane, Farmingdale, NY11735, U.S.A.
T. +1 (516)-249-3662. F. +1 (516)-249-8870
WWW.MYELEKTRALITE.COM
Menus in the fixture.
Root Menu Sub Menu 1 Sub Menu 2
STAT (STATIC LOOK) RED 0-255
GREEN 0-255
BLUE 0-255
WHITE 0-255
STROBE 0-255
AUTO (AUTOMATIC) Red
Green
Blue
Yel low
Cyan
Purple
White
Effect #1
Effect #2
Effect #3
RUN DMX 512
SLAVE
ADDRESS ASSIGN DMX CHANNEL 1-512
ID address 1-255
PERSONALITY STAG(E)
ARC.1
ARC1.D
ARC2
AR2.D
AR2.S
HSV
SETTINGS DTV NTSC/PAL
RGB→White ON/OFF ***
DIMMER 000(OFF), 001, 002, 003 or 004
RESET Password required*
FAN OFF
AUTO
LOW
NORMAL
HIGH
OFF
KEY LOCK OFF **SEE BELOW
ON
*The Password for the reset is using the up and down buttons when in the reset menu. The screen will initially display [ ]. The
following needs to be pressed ↑↓↑↓↑↓ then press Enter. The screen will then display the word "OK" for 2 seconds and the fixture will
reset.
**The Pasword for Key Lock is the same as reset. If key lock is ON then everytime you power up the eye Ball the
Password is requested. The password must be put in the eye Ball display otherwise no changes can be made to the operation of the
eye Ball.
***RGB→White. If this feature is turned on the Output of the RGB and white can be adjusted for maximum output. Normally the R, G,
B, and W all default to maximum of 255 output. However this can be change for each of the color components from a value of 128 up
to 255.
Personalities.
STAG(E) Personality is the default it has the maximum channels size.
It uses all 11 channels please go to the DMX channel assignments to see what all
11 channels do.
ARC.1
1 0-255 RED
2 0-255 GREEN
3 0-255 BLUE
4
ARC1.D
ARC2
1 0-255 MASTER DIMMER
2 0-255 RED
3 0-255 GREEN
4 0-255 BLUE
5
1 0-255 RED
2 0-255 GREEN
3 0-255 BLUE
4 0-255 WHITE
5
(allow the fixture to be used in reduce channels if needed).
0-50
51-100
101-150
151-200
201-255
0-50
51-100
101-150
151-200
201-255
0-50
51-100
101-150
151-200
201-255
Linear dimmer speed（DIM=OFF）
nonlinear speed1（DIM1）
nonlinear speed 2（DIM2）
nonlinear speed 3（DIM3）
nonlinear speed 4（DIM4）
Linear dimmer speed（DIM=OFF）
nonlinear speed 1（DIM1）
nonlinear speed 2（DIM2）
nonlinear speed 3（DIM3）
nonlinear speed 4（DIM4）
Linear dimmer speed（DIM=OFF）
nonlinear speed 1（DIM=1）
nonlinear speed 2（DIM=2）
nonlinear speed 3（DIM=3）
Nonlinear speed 4（DIM=4）
ARC2.D
1 0-255 MASTER DIMMER
2 0-255 RED
3 0-255 GREEN
4 0-255 BLUE
5 0-255 WHITE
6
0-50
51-100
101-150
151-200
201-255 Nonlinear speed 4 (DIM4)
Linear dimmer speed（DIM=OFF）
Nonlinear speed 1（DIM1）
Nonlinear speed 2（DIM2）
Nonlinear speed 3（DIM3）
ARC2.S
1 0-255 MASTER DIMMER
2 0-255 RED
3 0-255 GREEN
4 0-255 BLUE
5 0-255 WHITE
6 0-255 STROBE (0 to 8 is no strobe. From slow at 9 to maximum flash rate
at 255)
7
0-50
51-100 nonlinear speed 1（DIM1）
101-150
151-200
201-255
Linear dimmer speed（DIM=OFF）
nonlinear speed 2（DIM2）
nonlinear speed 3（DIM3）
nonlinear speed 4（DIM4）
HSV
1 0-255 H hue
2 0-255 S saturation level
3 0-255 V brightness
4
0-50
51-100 nonlinear speed 1（DIM1）
101-150
151-200
201-255
Linear dimmer speed（DIM=OFF）
nonlinear speed 2（DIM2）
nonlinear speed 3（DIM3）
nonlinear speed 4（DIM4）
DMX Channel Assignments.
1 Grand Master for RGBW 0-255
2
RED Leds
3
GREEN Leds
4
Blue Leds
5
White Leds
6 No effect 0-010
Snap to Red 255 011
Crossfade Green 255→000 Blue 000→255 051-090
Crossfade Red 000→255 Blue 255→000 091-130
Crossfade Red 255
Crossfade Blue 000
Snap to Red 255 Green 255 Blue 255 White 255 171-200
Fan Off 011-020
Fan Low 021-025
Fan High 026-030
Fan Auto 031-040
No effect/function 041-050
Red 051-070
Green 071-090
Blue 091-110
Yellow 111-130
Cyan 131-150
Purple 151-170
White 171-190
Effect #1 (This is a chase loop; the speed of which is controlled by ch9 & cross fade by ch10). 191-210
Crossfade Red 255→000 Green 000
→000
White 000→ 255 131-150
Snap to White 1 (approximately 3200⁰K)
Snap to White 2 (approximately 3400⁰K)
Snap to White 3 (approximately 4200⁰K)
Snap to White 4 (approximately 4900⁰K)
Snap to White 5 (approximately 5600⁰K)
Snap to White 6 (approximately 5900⁰K)
Snap to White 7 (approximately 6500⁰K)
Snap to White 8 (approximately 7200⁰K)
Snap to White 9 (approximately 8000⁰K)
Snap to White 10 (approximately 8500⁰K)
Snap to White 11 (approximately 10000⁰K)
7 Strobe effect (0 to 8 is no strobe. From slow at 9 to maximum flash rate at 255) 000-255
8 No effect/function 000-010
→255
→255
White 255→ 000 151-170
0-255
0-255
0-255
0-255
012-050
201-205
206-210
211-215
216-220
221-225
226-230
231-235
236-240
241-245
246-250
251-255
DMX Channel Assignments (Cont.)
8 (cont) Effect #2 (This is a chase loop; the speed of which is controlled by ch9 & cross fade by ch10). 211-230
Effect #3 (This is a chase loop; the speed of which is controlled by ch9 & cross fade by ch10). 231-255
9 Auto Speed (Control for the effects #1, #2 & #3 on ch8). 000-255
10 Dim 00 (straight line dimmer) 000-050
Dim 01 (dimmer curve 1. Shortest fade time) 051-100
Dim 02 (dimmer curve 2. 2nd Shortest fade time) 101-150
Dim 03 (dimmer curve 3. 3rd Shortest fade time) 151-200
Dim 04 (dimmer curve 4. Longest fade time) 201-255
11 ID 01 thru ID 255 combined. 000
ID 01 001
ID 02 002
ID 03 003
ID 04 004
ID 05 005
ID 06 through to ID255 follow DMX values 006 to 255 006-255
Version V2.2 Completed 09.19.2012
Loading...