elektraLite eyeBall Architectural User Manual

E

lekt

ralite LED Pro

Line eyeBall 18-3W

DMX channel assignments and Menus

Elektralite is a division of Group One,
70, Sea Lane, Farmingdale, NY11735, U.S.A.
T. [phone]. F. [phone]

WWW.MYELEKTRALITE.COM

Menus and DMX channel configuration for Elektralite UV & WW eyeBall

TATIC → UV (or WW) 0-255 dimming level

1、S

STROBE 0-20 flashes

Static mode allows the fixture to be on without a controller.

2、AUTO → EFFECT 1

EFFECT 2

EFFECT 3

Auto is automatic in built programs. There are 3 programs.

3、 RUN → DMX512

SLAVE

The fixture can be run in DMX mode or as a slave fixture.

4、ADDRESS → DMX: 1-512

ID. : 1-255

The fixture can run in DMX. (Make sure the id address is set at 0 for DMX to work)

The fixture can run in any of 255 id addresses.

5、PERSONALITY → STAG1 (Stage 1)

STAG2 (Stage 2)

6、SETTINGS → DIMMER (Curve)→ 0-4

There are 4 choices.

RESET → PASSWORD [****] → <YES>

<NO>

The reset password is accessed by pressing the up/down keys in the

following order….UP DOWN UP DOWN then press enter

7、FAN → <OFF>

<AUTO>

<LOW>

<NORMAL>

<HIGH>

8、KEY → <ON>

<OFF>

The key is a lock on the display. So no one can interfere with the fixture.

To turn off the key, the password will need to be entered. See above for password details.

Factory Reset：

1. DMX ADDRES=001 5. FAN = AUTO

2. ID ADDRES=001 6. DIMMER = 001

3. RUN = DMX512 7. KEY = OFF

4. PERSONALITY = STAG1