Specifications and Main Features
- Model name: TNS 150 / TNS 175 W / TNS 175 D
- Power supply characteristics:
- TNS 150: 1~230V
-TNS 175 D: 3~400V
- TNS 175 W: 1~230V
- Rated motor power:
- TNS 150: 330 W
- TNS 175 D: 570 W
- TNS 175 W: 450 W
- No-load speed:
TNS 150:2750/126 min⁻¹ ,
TNS 175 W: 2750/126 min⁻¹ ,
TNS 175 D: 2600/126 min⁻¹
- External dimensions of the grinding wheel:
- TNS 150: 150/200 mm
- TNS 175 W: 175/200 mm
- TNS 175 D: 175/200 mm
- Working width of the grinding wheels:
- TNS 150: 20/40 mm
- TNS 175 W: 25/40 mm
- TNS 175 D: 25/40 mm
- Sound levels: The workplace noise source is less than 80 dB(A).
- Designed for sharpening knives, chisels, scissors, and type of metal liners.
Frequently Asked Questions
Q: What is the maximum mass that could be placed on the workpiece of the grinding machine?
A: Since the work manual does not indicate the… there is no maximum mass felt in the work.
Q: When am I required to insert another grinding wheel?
A: It is suggested to replace them when a certain minimum diameter mentioned in the manual is reached.
Q: Is it possible to use the machine without any breaks?
A: This machine is not at all made to run continuously. Running the APX for over 15-30 minutes is not recommended.
Q: Is there a possibility of the grinding wheel being damaged, and if yes, what should I do?
A: The wheel should not be used if there is any sort of damage. An undamaged wheel that meets the specifications should be utilized.
Q: Is there any sort of warranty that comes for the machine?
A: There is a warranty of 12 months from the day the machine is purchased, however this is subjected to certain conditions which are laid out in the manual.
Q: Which variety of grinding wheels could be used along with this machine?
A: Natural stone or ceramic made wet grinding wheels, fused alumina adapted wheels, normal and fine corundum wheels are the ones that this machine can work with.
User Manual
Loading...