Elegant Lighting MRE8003 User Manual

Elegant Furniture And Lighting Inc.

USER GUIDE ? LED LIGHTED MIRROR

USER GUIDE LED LIGHTED CABINET

MRE8003

19.5x27.5x5.5 inch

IF IN DOUBT ABOUT FITTING THIS PRODUCT, PLEASE CONSULT A QUALIFIED ELECTRICIAN

Page 1

PLEASE READ THE INSTRUCTIONS BEFORE SET UP AND INSTALLATION

C O M P O N E N T P A R T S A N D F I T T I N G S

IMPORTANT

Cabinet x1

Safety Warning

M04

Hinge cover x 2

(Included in pack)

M07

Screw & Wall plug x 5

(Included in pack)

M05

Wire nut x 3

(Included in pack)

M12

Glass s he lf x 2

(Included in pack)

Mounting bracket x 1

(Included in pack)

L shape bracket x 1

(Included in pack)

(Included in pack)

M13

M14

M15

Screw x 2

Suggested Tools:

Screw driver

Drill

Safety:

• We suggest you spend a short time reading the instruction leaflet.

• Carefully check that you have all the parts before beginning assembly.

• Keep small parts and fittings out of children's reach and keep children well away from construction
area, as the unassembled product contains small parts, which could present a choking hazard.

• We suggest you retain these instructions for future reference.

• This appliance can be used by adults ONLY.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.

• Note that this is a hardwired installation and does not come with a power switch. Your electrician

must install the hardwired mirror to an electrical junction box to connect to a room light switch to
turn off or turn on the mirror.
Note that this mirror does not come with a dimmer.

Caution:

• In order to avoid overheating, do not cover the mirror.

• Switch off the mains supply and remove the appropriate fuse or switch off the appropriate circuit

breaker before commencing installation

• Make sure that there is no danger that the cord or extension cord is inadvertently be pulled or cause

anyone to trip when in use.

Page 2