Electro-Voice ZX Series ZxA5-60, ZX Series ZxA5-90, ZxA5-60, ZxA5-90 Owner's Manual
ZxA5 Series
Loudspeaker
Owner’s Manual
ZxA5-60
ZxA5-90
ELECTRO-VOICE® ZxA5 Owner’s Manual
Important Safety Instructions
The lightning flash with arrowhead symbol, within an equilateral triangle
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrican for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped
14. To completely disconnect AC power from this apparatus, the power supply cord must be unplugged.
15. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on this
apparatus.
16. The AC plug of the power supply cord shall remain readily operable.
Caution: Do not exceed the marked rating of the AC Output.
Example: If each additional unit is rated 3A, a maximum of 3 units can be connected for a total of 9A.
Management of WEEE (waste electrical and electronic equipment) (applicable in Member States of the European
Union and other European countries with individual national policies on the management of WEEE) The symbol on
the product or on its packaging indicates that this product may not be treated as regular household waste, but has
to be disposed through returning it at a Telex dealer.
The asterisk within an equilateral triangle is intended to inform the user
to necessary installation or removal instructions regarding equipment
or hardware use relating to the system.
Important Ser vice Instructions
CAUTION: These servicing instructions are for use by qualified personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the Operating Instructions unless you are qualified to do so. Refer all
servicing to qualified service personnel.
1. Security regulations as stated in the EN 60065 (VDE 0860 / IEC 65) and the CSA E65 - 94 have to be obeyed when
servicing the appliance.
2. Use of a AC separator transformer is mandatory during maintenance while the appliance is opened, needs to be
operated and is connected to the AC.
3. Switch off the power before retrofitting any extensions, changing the AC voltage or the output voltage.
4. The minimum distance between parts carrying AC voltage and any accessible metal piece (metal enclosure),
respectively between the AC poles has to be 3 mm and needs to be minded at all times.
The minimum distance between parts carrying AC voltage and any switches or breakers that are not connected
to the AC (secondary parts) has to be 6 mm and needs to be minded at all times.
5. Replacing special components that are marked in the circuit diagram using the security symbol (Note) is only permissible
when using original parts.
6. Altering the circuitry without prior consent or advice is not legitimate.
7. Any work security regulations that are applicable at the location where the appliance is being serviced have to be strictly
obeyed. This applies also to any regulations about the work place itself.
8. All instructions concerning the handling of MOS - circuits have to be observed.
Note: SAFETY COMPONENT (HAS TO BE REPLACED WITH ORIGINAL PAR T ONLY)
ELECTRO-VOICE® ZxA5 Owner’s Manual1
Table of Contents
Important Safety Instructions .......................................................................................................... 1
ZxA5 Series Owner’s Manual ........................................................................................................ 2
Safety First.................................................................................................................................... 3
Description ................................................................................................................................... 4
System Features - ZxA5................................................................................................................ 4
System Coverage - ZxA5 .............................................................................................................. 4
System Setup - ZxA5..................................................................................................................... 5
ZxA5 Amplifier............................................................................................................................... 5
Suspending ZxA5 Speaker Systems ............................................................................................. 7
ZxA5 Stage Monitor Positions..................................................................................................... 13
Specifications ............................................................................................................................. 14
Dimensions................................................................................................................................. 15
Block Diagram............................................................................................................................ 15
Frequency Response, Beamwidth, and Directivity ....................................................................... 16
ZxA5 Rigging Accessory Reference Table ................................................................................... 17
FCC Information.......................................................................................................................... 17
Painting ZxA5 Speaker Systems................................................................................................. 18
ZxA5 Series Owner’s Manual
Thank you for choosing the Electro-V oice® ZxA5 series loudspeaker system. This system is the
culmination of EV’s experience in transducer design. Please take time to consult this manual so that
you can understand all the features built into your EV system and fully utilize all its performance
capabilities.
ELECTRO-VOICE® ZxA5 Owner’s Manual 2
Safety First
When setting up, installing and using the Electro-Voice® ZxA5 speaker system, there are a
number of precautions that you should follow:
· When Electro-Voice® ZxA5 speakers are used for portable applications in which they will be
positioned directly on the floor, make sure that the floor or stage is solid and secure.
®
· Electro-Voice
stands.
Make sure to:
· Check the specifications of the speaker stand to be certain it is capable of supporting the weight
of the speaker.
· Check that the speaker stand is placed on a flat, stable surface and be sure to fully extend the
legs of the stand. Do not try to make the stand “taller” and compromise its structural integrity.
· Route cables and position the stand so that performers, production crew and audience members
will not trip over the stand or cables and pull the speaker system over. Secure cables with wire
ties or tape whenever possible.
· Do not attempt to suspend more than one speaker on a stand designed for a single speaker
· Unless you are confident that you can safely handle lifting the weight of the speaker onto the
stand, ask another person to help you place it.
· If you intend to hang or fly the ZxA5 system, only do so safely with the correct hardware and
accessories.
ZxA5 speakers include 1-3/8 inch stand mounts to allow mounting on tripod
WARNING:
Suspending any object is potentially dangerous and should only be
attempted by individuals who have a thorough knowledge of the techniques and
regulations of rigging objects overhead. Electro-Voice® strongly recommends that
ZxA5 speakers be suspended taking into account all current national, federal, state
and local regulations. It is the responsibility of the installer to ensure that ZxA5
speakers are safely installed in accordance with all such regulations. If ZxA5 speakers
are suspended, Electro-Voice® strongly recommends that the system be inspected at
least once a year. If any sign of weakness or damage is detected, remedial action
should be taken immediately.
There are data sheets for each EV Suspension and
Array Kit that should also be consulted prior to suspending speakers.
· Electro-Voice® does not recommend use of ZxA5 speakers outdoors without
protection from rain or in high moisture environments.
· Electro-Voice® ZxA5 loudspeakers are easily capable of generating sound pressure
levels sufficient to cause permanent hearing damage to anyone within normal
coverage distance. Caution should be taken to avoid prolonged exposure to sound
pressure levels exceeding 90 dB.
Note: This is a Class A product. In a domestic environment this product may cause radio
interferences in which case the user may be required to take adequate measures.
ELECTRO-VOICE® ZxA5 Owner’s Manual3
Description
The Electro-Voice® ZxA5 high powered loudspeakers are fully integrated audio systems with
carefully matched electronics and transducers. These products make it easy to setup a high
quality sound system quickly with a minimum amount of cables and external electronics. You
won’t find a speaker system available on the market that offers the unbelievable sound, incredible
flexibility and tremendous output capability of the ZxA5 anywhere near it’s size and weight.
System Features - ZxA5
· Integrated Amplifier with 1000W LF, 250W HF
· Selectable 100 Hz High Pass
· XLR and 1/4” TRS Input Connector
· XLR Output Connector
· PowerCon Connector with Slave Through
· DVX3150 15” LF Transducer with Forced Air Cooling
· ND2 2” Voice Coil, 1” Exit Neodymium Compression Driver
· Two Models: 60° x 60° or 90° x 50° Coverage Patterns
· High Sensitivity, 133 dB Maximum SPL
· Adjustable Monitor Angle (45° or 55°)
· 3 Anchor Plates for Single Stud Fitings and 10 Integral Suspension Points
· Full Line of Accessories
System Coverage - ZxA5
Coverage Patterns and Applications
ZxA5-60 60° x 60° coverage for long-throw and cluster applications
ZxA5-90 90° x 50° for wider coverage or shorter distances
Figure 1a:
3D EASE Directivity Balloon,
ZxA5-60, 60° x 60° Coverage
3D EASE Directivity Balloon,
ZxA5-90, 90° x 50° Coverage
Figure 1b:
ELECTRO-VOICE® ZxA5 Owner’s Manual 4
System Setup - ZxA5
To get the ZxA5 into operation as quickly as possible, please observe the following steps and
precautions:
· Plug the 3-terminal PowerCon AC cable into a grounded line receptacle. Extension cords can be
used to lengthen the AC cable as necessary but make sure that they are 3-conductor 14 gauge
or greater, and that they are properly grounded to avoid electrical hazards and extraneous noise.
· Be sure that the ZxA5 is plugged into an AC power source that is capable of supplying the
correct voltage. If the line voltage drops too much, the built-in amplifiers won’t be able to
develop their rated power and sound quality will suffer. Under high signal conditions, the 120V
ZxA5 amplifier can draw 3 - 4 amps of current (2 amps at 240V). That means that no more than
(3) ZxA5 systems should be plugged into a single 15 amp electrical service. Be cautious of what
else is plugged into the same electrical service line to avoid electrical problems and poor
performance.
CAUTION: Before turning the power on, make sure that the level controls are down to
avoid transients or unexpected loud sound.
ZxA5 Amplifier
Input Signal Connector
Electronically balanced inputs
for the connection of highlevel signal sources such as
mixers, signal
processors, etc. Establishing
the connection is possible via
a combinaton 1/4” TRS and
XLR jack. Balanced
connection is recommended
to prevent noise or HFinterference.
CAUTION: Before connecting or
disconnecting any plugs, make sure to set
the level control to its counterclockwise
stop, which prevents the system and
audience from contact pops and noise.
Output Signal Connector
Output is full bandwidth pass
through.
5
Figure 2:
Amplifier Panel, ZxA5
ELECTRO-VOICE® ZxA5 Owner’s Manual
Loading...