Electro-Voice Xi Series Xi-2122MHA, Xi-2122MHA/42F Technical Specifications

Key Features:

• Unprecedented Output in a High-Level, Two­Way Design

• Dual ND12A 12” Neodymium Mid-Bass
Drivers

• Coaxially-Mounted Dual ND6-16 3”
Diaphragm HF Compression Driver for V ery
High Output

• Far-Field, Long-Throw 40° x 20° Coverage
Pattern

• Ring-Mode Decoupling / RMD

• Built-In L-Track Rigging

• Available in Blac k or White

• Footprint Identical to Xi-1153A, Xi-1183A,
Xi-2153A, Xi-1191A, and Xi-2181A

TM

Xi-2122MHA/42F

Dual 12-Inch T wo-W ay ,

Long-Throw , Mid-High 40° x 20°

Sound Reinforcement System

General Description:

The Electro-Voice® Xi-2122MHA/42F loudspeaker system
was designed for optimal performance in both concert-sound
and permanent-installation applications where studio­monitor sound quality is required at concert-sound levels.
The high acoustic output from these compact, lightweight
systems provide the highest acoustic-power-to-weight ratio,
the highest acoustic-power-to-frontal-area ratio, and the
highest acoustic-power-to-size ratio in the industry . This means
that Xi-A Series systems will be considerably smaller and
lighter compared to competitive systems having equivalent
acoustic output. The 40° H x 20° V co v erage pattern of the Xi­2122MHA/42F makes it ideal for sound-reinforcement
applications with long-throw requirements. With its response
from 125-20,000 Hz, is recommended for mid-bass-/high­frequency applications and should be used with an Xi-A
Series bass box (like the Xi-1191A or Xi-2181A) for full-r ange
applications. The Xi-2122MHA/42F may be used individually
or in multiples to construct arrays. In addition, the Xi-2122MHA/
42F may be used with the MB/HF or LF/MB/HF Xi-A Series
loudspeaker systems to construct large full-range arrays. The
Xi-2122MHA/42F enclosure shell and rigging are identical to
the other full-size Xi-A Series systems for easy array
integration. The 40° H x 20° V coverage pattern offers precise
pattern control, and would be well suited for front-of-house,
front-fill, side-fill and delay applications. The Xi-2122MHA/
42F is a two-way active system that requires an active
electronic crossover. Both the Electro-Voice Dx38 and Klark
T eknik DN9848 digital crossov ers are recommended for signal
control. The Electro-Voice P3000 amplifier is recommended
for powering the Xi-2122MHA/42F.

Technical Specifications:

1

esnopseR.qerF

1

egnaR.qerF

1

Full Space measurement with a Dx38 Controller

2

Max Calculated SPL of MB Section

3

Download at www.electrovoice.com

:)Bd3-(zHk61-zH071
:)Bd01-(zHk02-zH521

2

:Bd541

LPSdetaluclaCxaM

:egarevoC°02x°04
:gnildnaHrewoPBMkaePW0042,suounitnoCW006
:gnildnaHrewoPFHkaePW006,suounitnoCW051
:ytivitisneSBMm1/W1,Bd211
:ytivitisneSFHm1/W1,Bd611
:ecnadepmIBM)lanimoN(smho4
:ecnadepmIFH)lanimoN(smho8
:recudsnarTBM,srevirD)mm503("21A21DN)2(

smho8

:recudsnarTFHmgarhpaiD)mm67("361-6DN)2(

3

ycneuqerFrevossorC

:sretemaraPdednemmoceResU
:srotcennoCnokaepSkirtueNowT

:lairetaMerusolcnEdoowylphcriBylp-31
:ellirGleetsAG61
:)DxWxH(miDmm957x685x419

:thgieWteN)sbl091(gk3.68
:thgieWgnippihS)sbl991(gk1.09

delellaraP

smho61,srevirD.pmoC

®

)"9.92x"1.32x"0.63(

RPM8LN

Xi-2122MHA/42F Full Range Loudspeaker

Impedance:Frequency Response (Full & Half Space):

Horizontal Off Axis Frequency Response:Beamwidth:

Directivity:

Wiring Diagram:

Vertical Off Axis Frequency Response
(Up or Down):