X-Line Compact
XGS-3 Groundstack
User Instructions
XGS-3 Groundstack
The X-Line Compact Groundstack features a rigging attachment position to allow a column of an X-Line Compact
Loudspeaker Array to be Groundst acked and tilted to obtain the desired sound coverage.
Quick-Release Pin
(From Enclosure)
Button Bar
(Push in through access hole)
Figure 1: Attaching Loudspeakers to Groundstack Rails
XLC Loudspeaker
Note: Assembly process is
mirrored for the other side.
Lag Bolt Holes
(2 per side)
To select the correct pin position on the bottom enclo-
sure of your XLC Ground Stack, find your enclosure
type and specific angle, and pin the Ground Stack
swing arm to that position. For safety reasons, pin
only to numerically indicated positions. Left sides are
shown, right are mirrored views.
Figure 2: Angle Instruction for Bottom Enclosure
Pin Position
These configurations are showing
the maximum number of enclosures and top enclosure angles
allowed. They also show the
proper balance for safety and
acoustical performance. All lesser configura-
tions are allowed at customer’s discretion.
For all configurations approaching these
maximums, and all configurations used
outdoors, use the lag bolt holes in the base of
the L-extrusions to secure the groundstack
base to the mating surface.
Figure 3: Full-Range Array -
XLC127+ Array (8 Max)
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
XLC118 or XLC215 Array (5 Max)
www.electrovoice.com
© Telex Communications, Inc. 11/2005
Part Number 38110-464 Rev A
Figure 4: Subwoofer Array -
Figure 5: Combination Array -
XLC127+ (5 Max) and
XLC118/XLC215 (2 Max)
U.S.A. and Canada only. For customer orders,
contact the Customer Service department at
Europe, Africa and Middle East only. For customer orders,
For warranty information, contact the Service Repair department at:
For technical assistance, contact Technical Support at:
Specifications subject to change without notice.
800/392-3497 Fax: 800/955-6831
contact the Customer Service department at
49 9421-706 0 Fax: 49 9421-706 265
616/695-6831 or 800/685-2606
866/78AUDIO