Electro-Voice SxA250 User Manual
Key Features:
• Lightweight, Ergonomic Size - 49lb (22.2 kg)
• Angled Enclosure for Monitor Use
• Mic and Line Inputs with Mix Capability
• 350 W Dynamic LF Power
• 80 W Dynamic HF Power
• LF and HF Equalization
• Line Output for Additional Speakers
• 80° x 55° Constant Coverage Horn
• High Sensitivity, 126 dB Maximum SPL
• Dynamic Filters Provide Overload
Protection and Linear Response
• Built-in Pole Mount
• Easily Suspended with Optional Rigging Kit
SxA250
Compact Powered Sound
Reinforcement Speaker For:
Live Sound, Speech, Playback,
DJ, A/V, Institutional Venues
General Description:
The SxA250 sets a new standard for powered speakers. Its
design provides the user multiple inputs with mix capability,
an easy to use EQ section, and plenty of power in a very
compact, attractive package.
This is a full range loudspeaker ideal for applications requiring
high-quality sound. Careful attention to the dynamic
requirements of music guided the amplifier design to provide
high SPL. The high quality microphone preamplifier provides
great sounding vocals or speech. A master level control sets
the desired SPL, and the line input can be mixed and balanced
with a microphone with its level control. Its linear response is
easily optimized for speech or music with the on board
multiband equalization.
Built-in pole mount and optional rigging hardware make it
easy to position for your application.
The high-frequency section of the SxA250 utilizes a moldedin, 80° x 55° constant-directivity horn. This unique pattern
contributes to high intelligibility. Vocals sound natural yet “cut
through” reverberant, noisy rooms. Coverage pattern is
uniform and sound quality off-axis is very well maintained,
even at 40° off axis (an 80° total coverage angle). The
SxA250’s high-frequency horn is driven by the DH2010A, a
1.25 inch diaphragm, wide-bandwidth, titanium-diaphragm
driver using a unique, convex-drive TimePath
structure (U.S. Patent #4,525,604) for smooth and extended
high-frequency response.
TM
phasing plug
Technical Specifications:
:)Bd01-(esnopseR.qerFzHk02-zH55
:LPSxaMBd621
:egarevoClatnoziroH°08
:egarevoClacitreV°55
:rewoPreifilpmAFLsuounitnoCW051,tsrubsm01W053
:rewoPreifilpmAFHsuounitnoCW05,tsrubsm01W08
:ytivitisneStupnIciMtuptuollufrofuBd0otuBd53-
:ytivitisneStupnIeniLtuptuollufrofuBd0otuBd21-
:recudsnarTFL)mm183("51
:recudsnarTFHrevirDnoisserpmoCtixe)mm23("52.1
:srotcennoC
:eniL,ciM;stupnI.laB
:tuptuOdecnalaB
RLX
:noitazilauqEzH041@Bd6±FL;gnivlehS
:tnemeriuqeRrewoP042-022ro,zH06-05,CAV031-011
:lairetaMerusolcnEdoowylPylp-7
:ellirGhtolChtiwleetSdetaoCredwoP
:)DxWxH(miD"1.31x"2.71x"6.42
:)hcae(thgieWteN)gk2.22(sbl94
:thgieWgnippihS)gk0.42(sbl35
noitanibmoCenohp"¼&RLX,RLX
zHk5@Bd4±FH
sttaW006zH06-05,CAV
)mm333xmm734xmm526(
Block Diagram: Frequency Response:
Dimension Drawings: Beamwidth:
Directivity:
Performance Match:
• SxA180 Sub
Available Accessories:
• SK1 Rigging Hardware
• 100BK Tripod Stand
SxA250 Part Numbers
• 301221-001 120V
• 301221-003 230V
12000 Portland Avenue South, Burnsville, MN 55337
Phone:952/884-4051, Fax:952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 11/2001
Part Number 38110-076 Rev A
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
Loading...