Electro-voice SX600 BROCHURE

HIGH-OUTPUT INDOOR/OUTDOOR SPEAKER SYSTEM

Sx600

DUAL ELEMENT VERTICAL LINE ARRAY

GREAT SOUND AND INTELLIGIBILITY

600 WATT POWER HANDLING

PRECISE, VERSATILE MOUNTING

ALL-WEATHER ENCLOSURE

HIGH-OUTPUT INDOOR/

Historically, large venues such as indoor arenas and outdoor
stadiums operating under limited budgets challenge sound
system designers with serious tradeoffs. Anything approaching
“good sound” or higher fidelity is usually out of the question.
Typical systems are either loud but lacking vocal intelligibility,
or intelligible but of very limited bandwidth and, of course,
neither loud nor intelligible. Simple voice reproduction is
often overly resonant, difficult to understand, and unable
to achieve the necessary sound pressure level.

The Problem:

GREAT SOUND FOR LARGE VENUES

The Electro-Voice®Sx600 loudspeaker delivers exactly
what large venues need: substantially improved fidelity,
especially in the vocal range, at high SPLs. To achieve this,
Electro-Voice engineers created a dual element, critically
spaced, low frequency line array to produce the SPL levels
of a horn-loaded low/mid section. Then, they added the
clear vocal reproduction of a critically dampened direct
radiator system.

The Sx600 loudspeaker employs several performance-proven
EV®innovations, such as a neodymium-based mid-driver
from EV X-Array™concert systems, and an EV DL-Series woofer
that augments response below 300 Hz, improving directivity.
On the high-frequency end, an Electro-Voice DH2T
compression driver, coupled to our unique Varipath

™

constant directivity HF horn, produces both long throw and
wide front-to-back audience coverage. And our Ring Mode
Decoupling®(RMD®) technology is used throughout the
Sx600 to ensure level-independent tonal response and
a high level of intelligibility.

The Sx600 Solution:

Sx

600