Electro-Voice Sx600 User Manual
Sx600 User Manual
Electro-Voice®
Sx600 User Manual
Table of Contents
Product Description ................................................................................. 1
Important Features .................................................................................. 1
Product Feature Identification .................................................................. 2
System Acoustic Design Considerations ................................................. 3
Installation Precautions............................................................................ 4
Installation Notes ..................................................................................... 4
Installation Procedure .............................................................................. 7
Step 1: Selection and Preparation of the Mounting Surface ..................... 7
Step 2: Mounting the SuperSAMTM Bracket.............................................. 7
Step 3: Completing the Electrical Connections ........................................ 7
Step 4: Mounting the Speaker and Aligning ............................................. 8
Step 5: System Adjustment and Acoustic Tuning ................................... 10
Appendix A: Troubleshooting ................................................................. 10
Appendix B: Warranty Statement ........................................................... 12
Appendix C: Technical Specifiations ...................................................... 13
TOC
Electro-Voice®
Sx600 User Manual
Product Description
The Sx600 Series is a remarkably flexible indoor/outdoor speaker
system designed to produce high-fidelity high-level audio in distributed
applications such as stadiums, racetracks, amusement parks,
fairgrounds, etc. Utilizing a 65° x 65° high frequency horn and a unique
2-element vertical midbass array, Sx600 gives you the clarity of a direct
radiator with the high SPL and directivity of a properly designed horn
system, especially in the important vertical plane. While intended
primarily for vocal applications, the Sx600 accurately reproduces music if
heavy bass is not required.
Important Features
The Sx600 is available as either a conventional 4 ohm low impedance
system, the Sx600PI, or as a constant voltage system, the Sx600PIX.
The PIX version features a 100% duty cycle rated 600 watt full isolation
line transformer for operation with 70volt, 100volt, 140volt, or 200volt
distributed systems.
The Sx600 comes with an all-new Super Strong Arm Mount, called the
SuperSAMTM. This exclusive 2-part EV mounting system allows the
installer to pre-set the exact down angle on the ground, fasten the
separate mounting bracket by itself, and then mount the speaker to the
bracket quickly and easily with a single bolt, setting the pan angle
anywhere within a 180° arc in the process.
The three-layer stainless steel grill design is an acoustically transparent
yet effective barrier to both condensation and heavy rain. The lightweight polypropylene enclosure has strategically placed internal
passages to conduct moisture that may accumulate internally out to the
side channels where it drains away.
Electro-Voice®
Sx600 User Manual
1
Product Feature Identification
(Front View)
65° x 65°
TM
Varipath
Constant
DirectivityTM HF
Horn with DH2T
Compression
Driver
Nd12A-8
Neodymium
Midbass Driver
DL12BFL
Midbass/LF
Driver
Weather-Resistant Lightweight
Polypropylene Enclosure
Enclosure
Enclosure
(Rear View)
White
+
Black
-
SJO Input
Cable
All Aluminum
Rigging
Full Face Stainless Steel Grille
with Hydrophobic Backing
(Not Shown)
All Stainless Steel Hardware
(Not Shown)
Figure 1: Sx600 Product Features
2
All Aluminum
Rigging
SuperSAMTM Down
Angle Adjustment
(0°- 60° in 5°
Increments)
Electro-Voice®
Stainless Steel
SuperSAM
Mounting
Sx600 User Manual
TM
Bracket
System Acoustic Design
Considerations
Direct radiator acoustic systems can offer great vocal band clarity but
dont usually offer the efficiency and directivity of horn loaded systems.
Horn loaded systems, if the overall dimensions are large enough, can
offer great directivity control, but typical multi-way horn designs,
particularly high Q co-axial designs, are also naturally resonant.
Resonant systems suffer from poor time domain response and, as a
consequence, can have poor intelligibility. The EV solution is to combine
a two element critically spaced midbass line array with ultra-efficient
neodymium magnetics. This produces the high SPL levels and vertical
directivity of a properly horn loaded low/mid section while maintaining the
clear vocal reproduction of a well damped direct radiator system. The
Electro-Voice ND12A neodymium midbass driver developed for X-Array
has been optimized for ultra high level, high intelligibility 300Hz to 2kHz
response. The ND12A incorporates EVs Ring Mode Decoupling (RMD)
technology to dampen mechanical domain resonances that color vocal
fundamentals in normal direct radiator systems. RMD, found in most EV
drivers, ensures level independent tonal response and produces a level
of intelligibility unique to EV systems. The second 12 inch driver, a
specially modified DL series, works with its own crossover section and
critical spacing to the ND12A to greatly improve midband vertical
directivity and system output below 300Hz. The result is clear, clean
vocals, with the SPL capabilities required for large spaces.
The SX600 also features EVs DH2T medium format compression driver
coupled to our unique Varipath constant directivity high frequency horn.
The HF horn pattern is optimized to a 65° horizontal by 65° vertical
included angle to produce both long throw and wide front to back
audience coverage. The high power handling and low distortion
performance of the DH2T assures excellent vocal articulation with
extended high frequency coverage to beyond 16kHz.
Electro-Voice®
Sx600 User Manual
3
Loading...