Electro-Voice SL10-2V EDS User Manual

Step 1:

Assemble speaker bracket to enclosure with supplied hardware. Attach rubber bumpers to enclosure as shown in illustration.

Step 2:

Attach wall bracket to wall using appropriate hardware (not supplied).

Note: It is the installers responsibility to choose and use fasteners correct for the wall construction on site.

SL10-2V Series Bracket Kit

Assembly and

Installation Instructions

Speaker Bracket

Screws

Step 3:

Slide enclosure (with speaker bracket attached) over wall bracket.

Rubber Bumpers

Wall Bracket

Suspension Safety Warning

This guide provides instruction on how to install the SL10-2V surround speaker to a wall. Correct use of

appropriate hardware is required for secure installation. Only persons with the knowledge of proper hardware

and safe installation techniques should attempt to install any sound systems overhead. CAUTION! The

weakest component determines the size and safety of the entire installation. Before installing any speaker

always inspect all components of the installation including building structural supports for cracks, deformations,

corrosion or damage that could reduce strength and safety of the installation.

It is the responsibility of the user to ensure that any Electro-Voice loudspeaker system is installed overhead in

accordance with all current federal, state, and local regulations.

12000 Portland Avenue South, Burnsville, MN 55337 Phone:952/884-4051, Fax:952/884-0043

www.electrovoice.com

Part Number 38110-207 Rev A

U.S.A. and Canada only. For customer orders, contact Customer Service at:

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

Other International locations. For customer orders, contact Customer Service at:

For warranty repair or service information, contact the Service Repair department at:

For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.

800/392-3497 Fax: 800/955-6831

+ 49 9421-706 0 Fax: + 49 9421-706 265

+ 1 952 884-4051 Fax: + 1 952 736-4212

800/685-2606