Electro-Voice SB122 Specifications

Key Features:

• Very Compact and Lightweight -­Only 33 lbs/15.0 kg

• Integral handle

• 400 Watt continuous, 1,600 Watt peak power
handling

• Parallel Neutrik Speakon high current input
connectors

• Cast frame EVS12SB 12-inch high excursion
subwoofer driver

• Integral low-pass filter -- No additional
amplifier or processor needed

SB122

12” 400-Watt

Bass Module

General Description:

The Electro-Voice® SB122 bass module is a very
compact, lightweight subwoofer system that is designed
to add bass enhancement to EV Sx and Zx Series
speaker systems. The SB122 combines the advantages
of a long-throw 12" woofer with a strong, lightweight
composite enclosure. The large vent provides less vent
compression and turbulence for increased low frequency
output. The EVS12SB cast frame transducer created for
the SB122 uses the same motor and suspension design
as the EVS18S used in EV’s larger systems. With
nearly two inches of peak-to-peak excursion capability ,
this is literally a twelve inch with the heart of an eighteen.
An integral low-pass filter allows the SB122 to be directly
connected in parallel with a full-range speaker for truly
impressive low-end output without the need for an
additional amplifier and processor. The filter is transparent
below 160Hz, allowing the SB122 to be used as an
independent subwoofer in biamp applications without the
need to disable the internal filter. For maximum output in
biamp applications and protection of the full-range system
when running in parallel, a 40Hz Hi-pass (subsonic) filter
is recommended. The SB122 features a convenient pole
mount socket on top of the enclosure to allow a small full­range speaker such as the Zx1 or Sx80 to be mounted on
the optional ASP-1 accessory pole, resulting in a
compact system than sounds much bigger than it looks.

Technical Specifications:

1

esnopseR.qerF

1

egnaR.qerF

1

ytivitisneS

1

Half Space measurement.

dednemmoceR

revossorCdednemmoceR

:)Bd3-(zH541-zH25
:)Bd01-(zH002-zH34

zH04

:ycneuqerFssaP-hgiH
:)m1/W1LPS(Bd99
:LPSdetaluclaCxaMBd131
:).tnoC(gnildnaHrewoPsttaW004
:)kaeP(gnildnaHrewoPsttaW006,1
:recudsnarTFL)mm503(ni21,BS21SVE

:pmaiB,egnaRycneuqerF
:ecnadepmIsmhO8
:srotcennoC4LNnokaepSkirtueN)2(
:)DxWxH(miD"3.21x"9.61x"1.32

:thgieWteN)gk0.51(sbl33
:thgieWgnippihS)gk5.61(sbl4.63

zH061-zH08

)mm213xmm924xmm685(

Accessories:

• 302055-000 ASP-1, Adjustable Sub Pole

• 5912525 PDSx, Carrying Bag

• 302053-001 TSS-1, Tripod St and

Performance Match:

• Q66 Power Amplifier

SB122 Part Number:

• 302013-001 SB122, Black Finish

• 302013-002 SB122, White Finish

Dimension Drawing:Frequency Response:

WARNING: The SB122 is very
lightweight and has a small footprint.
Do not attempt to pole-mount a
speaker system larger than a Zx1 or
Sx80 on the SB122.

12000 Portland Avenue South, Burnsville, MN 55337
Phone:[phone], Fax:[phone]

www.electro voice.com

© Telex Communications, Inc. 3/2006

Part Number 38110-535 Rev 1

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: [phone]

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265

Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 736-4212

For warranty repair or service information, contact the Service Repair department at:

800/685-2606

For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.