Electro-Voice RE92L User Manual

Key Features:

-

• Wide, Smooth Frequency Response

• Cardioid Polar Pattern

• 12dB/Octave Switchable High Pass Filter

• Transformerless Differential Output to Drive
Long Cables

• Includes Both Single and Dual Mic Tie Clips

RE92L

Unidirectional Condenser

Lavalier Microphone

General Description:

The Electro-Voice® model RE92L is a professional quality
miniature cardioid, electret condenser lavalier microphone.
It is designed for unobtrusive miking of speech and
instruments, making it an excellent choice for use in many
broadcast, stage performance, and presentation purposes.
Its small size makes the RE92L ideal for theatre, interviews,
public address systems, and houses of worship. The RE92L
has a cardioid polar pattern for high gain before feedback.
The RE92L condenser element provides clear and natural
sound reproduction. The included two-stage windscreen
minimizes wind noise and popping. The RE92L includes an
inline module for connection to any standard microphone input
capable of supplying 24 to 52 Volt phantom power. The RE92L
comes supplied with 4 feet of cable, both single and dual tie
clasps, and a belt clip for the inline module with a non­reflecting black finish.

Technical Specifications:

:tnemelEnoitareneG

:esnopseRycneuqerF)trahcees(zH000,02otzH04

)trahcees(:nrettaPraloPdioidraC

Bd49:ER(esioNotlangiS

tiucriCnepO,ytivitisneS

:zHk1,egatloV
:)DHT%1(leveLgnippilCLPSBd531>
:esioNtnelaviuqE02=Bd0(dethgiew”A“LPSBd03<

:egnaRcimanyDBd501>

:)LPS
:zHk1,ecnadepmItuptuOsmho052
:stnemeriuqeRrewoPrewoPmotnahPtloV25ot42
:noitpmusnoCtnerruCylppus84Phtiw.pytAm6
:snoisnemiDenohporciM)mm5.01("214.0=retemaiD

:snoisnemiDeludoMenilnI)mm2.22("578.=retemaiD

:elbaC2.1(tf4xretemaid)mm45.2("001.0

:ytiraloPhtiw,3nipotecnerefer,evitisop2niP

:dehsinruFseirosseccAneercsdniWegatSowT

:roloCkcalbgnitcelfernoN
:snoitidnoClatnemnorivnE:%05-0ytidimuHevitaleR

:thgieWteNeludomenilnihtiw)smarg061(.zo6.5

Bd46

feiler

lacsaP/Vm6.5

)slacsaporcim

gnol)m

pilCeiTelgniS

pilCeiTlauD

2tertcelekcab,resnednocdesaiB-fleS

mgarhpaidderettupsdlog,kcihtnorcim

niartsssel,)mm1.42("849.0=htgneL

)mm9.531("053.5=htgneL

mgarhpaidehtnoerusserpevitisop

eludomenilnirofpilCtleB

)F°561ot°02-(C°47ot°92-

:%59-0ytidimuHevitaleR

)F°531ot°02-(C°75ot°92-

Frequency Response:

Polar Response:

Application Notes:

Using the Windscreen

The RE92L includes a windscreen that can be used anytime wind noise or breath pop is a problem. To install the
windscreen, simply press it on the top of the microphone. The windscreen has an internal frame that includes a stop
to help positioned the windscreen correctly. When installing the windscreen, make sure to push it down on the
microphone as far as it will go. This will ensure that the frame inside the windscreen doesn’t cover any of the acoustic
side ports on the microphone.

Microphone Positioning (For Best Results)

Best results will be achieved with the mic positioned 3 to 6
inches below the neckline. Typical locations are on the lapel,
shirt collar, or on the shirt directly below the chin. You
should avoid covering the microphone with any cloth, since
this could change the frequency response characteristics of
the microphone.

If mechanical noise pickup from the cable is a problem, it
can be minimized by looping the cable up and through the
tie clip as shown.

Dimensions:

Inline Module Dimensions Microphone Dimensions

12000 Portland Avenue South, Burnsville, MN 55337
Phone:[phone], Fax:[phone]

www.electrovoice.com

© Telex Communications, Inc. 12/2003

Part Number 38110-287 Rev A

Cable Position with Tie

Clip

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: [phone]

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265

Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 736-4212

For warranty repair or service information, contact the Service Repair department at:

800/553-5992 or 402/467-5321

For technical assistance, contact Technical Support at: 800/392-3497 or 952/736-4656

Specifications subject to change without notice.