Electro-Voice PLASMA P1 EDS User Manual

Key Features:

• Compact, Ergonomic Size

• 550W + 150 W Dynamic Output Power

• EVX155RMD 15” LF Transducer

• ND6 Compression Driver

• Simple, Versitile Suspension

• High Sensitivity , 132 dB Maximum SPL

• Linear Response, Fail-Safe Operation with
V oice Coil Tracking T echnology

• Switchable High-Pass Filter for use with P2
Subwoofer

Plasma P1 (Left/Right)

15-Inch T wo-Way

Powered 80° x 55°

Speaker System

General Description:

The Electro-Voice® Plasma P1 integrates premium EV

transducers with high power class H amplification and
signal processing to provide an outstanding combination
of sonic detail, SPL, and ease of use. A EVX155 15" uses
a Kevlar reinforced cone with RMD driven by a 4" voice coil
for well-defined transient response while maintaining
articulate vocals at all SPLs. An ND6 compression driver
with a 3" diaphragm and 1.4" exit provides extended HF
response with very low distortion. A class H two-channel
amplifier requires no fans for quiet operation, low
maintenance, and long-term reliability . Coupled with signal
processing for linear acoustic response, and unobtrusive
protection it delivers the power required for high-level
reinforcement. Dynamic linearity is another benefit of
amplifiers designed for system integration with large format
transducer motors.

L-track is embedded into P1 to provide convenient multi
axis suspension and attachment points for an optional
suspension arm. The very compact multi-angle enclo­sure can be used in monitor position (in left and right con­figurations), or arrayed.

The P1 is acoustically designed for uniform coverage in
both horizontal and vertical planes adding to its versatility.
P1’s applications are for where the highest quality sound
is required; Theater, A/V, Stage monitoring, Sound rein­forcement.

Technical Specifications:

:)Bd3-(esnopseR.qerFzHk71-zH54

1

)Bd01-(egnaR.qerF

:zHk91-zH83
:LPSxaMdetaluclaCBd231
:egarevoClatnoziroH°08
:egarevoClacitreV°55
:ngiseDreifilpmAHssalC
:DHT%10.0<
:ecnadepmItupnIK02 Ω
:rewoPreifilpmAFL)kaePW055(SMRW064
:rewoPreifilpmAFH)kaePW051(SMRW041

revossorCssaP-hgiH

zH001

:)elbahctiwS(
:lortnoCleveL-θ Bd6+ot
:ytivitisneStupnItuptuollufrofBd6+
:recudsnarTFLDMR551XVE)mm183("51
:recudsnarTFHrevirD.pmoC6DNtixe)mm6.53("4.1
:srotcennoC

:stupnIeniLdecnalaB
:tuptuOdecnalaB

RLX
:tnemeriuqeRrewoPzH06-05,CAV042ro,032,021,001
:lairetaMerusolcnEdoowylPhcriBylp-31
:hsiniFtenibaCarutuF
:ellirGhtolChtiwleetSdetaoCredwoP
:)DxWxH(miD"7.51x"8.81x"2.42

:thgieWteN)gk3.24(sbl39
:thgieWgnippihS)gk0.54(sbl99

1

Frequency Response: 1/2 Space

noitanibmoCenohp"¼dnaRLX

)mm004x674x516(

Plasma P1 Full Range Loudspeaker

Horizontal Off Axis Frequency Response:Frequency Response (Full & Half Space):

Beamwidth:

Directivity:

Vertical Off Axis Frequency Response
(up):

Vertical Off Axis Frequency Response
(down):

Block Diagram:

Engineering Data Sheet

Horizontal 1/3 Octave Polars:

Vertical 1/3 Octave Polars:

Dimension Drawings:

Side View

Top View

Front View

Top View

Front View Side View

Plasma P1L (Left Version) Plasma P1R (Right Version)

Plasma P1 (Right) Part Numbers

• 301504-001 - 120V

• 170297 - 230V

Plasma P1 (Left) Part Numbers

• 301505-001 - 120V

• 170296 - 230V

Performance Match

• 301506-001 Plasma P2 Subwoofer, Black Futura

Accessories

• 301538-001 Suspension Arm, Vertical, PSA-V

• 301549-001 Pull-Back Kit, Plasma P1

• D112941 Truss Clamp

• D112934 PowerCon to PowerCon 1.5M (4.5ft) Cable

• D112935 PowerCon to PowerCon 8M (24ft) Cable

1

12000 Portland Avenue South, Burnsville, MN 55337
Phone: [phone], Fax: [phone]

www.electrovoice.com

© Telex Communications, Inc. 11/2003

Part Number 38110-310 Rev . A

1

Requires Suspension Arm

U.S.A. and Canada only. For customer orders, contact Customer Service at:

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

Other International locations. For customer orders, contact Customer Service at:

For warranty repair or service information, contact the Service Repair department at:

For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.

800/392-3497 Fax: [phone]

+ 49 9421-706 0 Fax: + 49 9421-706 265

+ 1 952 884-4051 Fax: + 1 952 736-4212

800/685-2606