Electro-Voice N-D367s User Manual
Key Features:
• Classic N/DYM® sound
• Smooth, controlled frequency response
®
• High N/DYM
sensitivity
• Superior multistage shock mount and “Warm
Grip” handle for unmatched low handling
noise
• On/Off switch
• Also sounds great when used on a podium
General Description:
N/D367s
N/DYM® Dynamic Cardioid
V ocal Microphone
The Electro-Voice N/D367s is a member of a family of microphones
that are manufactured with refinements that enhance the sonic
smoothness, improve gain-before-feedback and provide more
consistent performance with greater durability than earlier
generations of N/DYM® microphones.
The controlled response of the N/D367s allows the user to easily
work the microphone for optimal performance.
The N/DYM
with a reinforced diaphragm design, creates a smooth, extended
frequency response with a warm, open and transparent sound
quality.
The N/DYM
mount system. This unique vibration isolating system works as a
multistage device. At low frequencies, a rear sound wave cancels
the diaphragm motion, while, at high frequencies, the specially
designed rubber shock mount isolates the transducer from motion.
Combining AcoustiDYMTM with the elastomeric Warm-Grip
and the windscreen bumper produces an advanced technology ,
vibration isolating system which dramatically reduces all forms of
handling noise for the most demanding situations.
The N/D367s has a cardioid polar pattern, providing an enhanced
front-area sensitivity and acoustic rejection directly behind the
microphone, reducing feedback under live performance conditions.
This is particularly useful with typical monitor speaker placement
and high sound pressure (SPL) requirements. Additionally , the N/
D367s’s polar patterns are unusually uniform with frequency,
ensuring superior gain-before-feedback in live applications and
superior isolation when used in the studio.
The N/D367s pop filter’s unique design utilizes a specially
processed Acoustifoam
P-pops. This design makes the pop filter an integral part of the
microphone’s removable front grille assembly, allowing easy
cleaning for continued top performance.
®
magnet geometry used in the N/D367s, combined
®
microphones feature EV’s AcoustiDYMTM shock -
TM
handle
TM
filter to minimize wind noise and vocal
Technical Specifications:
:tnemelEerutcurtstengamMYD/NcimanyD
:esolC,esnopseR.qerFzH000,22-zH03
:raF,esnopseR.qerFzH000,22-zH06
:nrettaPraloPdioidraC
tiucriCnepO,ytivitisneS
:zHk1@egatloV
:egnaRcimanyDBd441
:esioNtuptuOtnelaviuqEdethgiewABd41
:ytiraloPsesuacmgarhpaidnoerusserpevitisoP
:ecnadepmI)z-wol(decnalabsmho053
:rotcennoCenohporciMepytRLXnip3
:hsiniFkcalbgnitcelfer-noN
:dedulcnIseirosseccAretpadAdnatSciM
:htgneL,snoisnemiD
:retemaiD
:knahS
:thgieWteN)g852(zo1.9
:thgieWgnippihS)g535(zo9.81
The N/D367s also features a noiseless on/off switch, which is
useful in giving the speaker/vocalist control of their signal to the
mixer.
lacsap/Vm0.3
)lacsap20000.0=Bd0(
3nip.fer2nipnoegatlovevitisop
gaB"giG"dereppiZtfoS
)mm181("21.7
)mm25("50.2
)mm02("08.0
Polar Response:Frequency Response:
(5 dB per division)
1000 Hz
330°
0°
30°
300°
270°
240°
210°
60°
90°
120°
150°
180°
Microphone Use and Placement
Please note that micing techniques are a matter of personal preference. These are merely guidelines to assist in the placement of the
microphone to gain optimal performance.
Usage Optimal Placement
Vocals Zero to six inches from the windscreen, and on axis with the microphone.
Spoken Word Five to ten inches from the windscreen, and on axis with the microphone.
Standard Placement & Use Guidelines
1. Always point the microphone at the desired source of sound, and away from any unwanted sources.
2.The microphone should be located close to the sound source to minimize interference from other potential sound sources.
3. Use the 3-to-1 rule when using multiple microphones. Place each microphone three times farther from other microphones as from the
desired sound source.
4. Minimize over-handling of the microphone to reduce unwanted mechanical noise.
5.Working close to the microphone will increase the bass tone and also provide increased gain-before-feedback.
Dimension Drawing:
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 9/2003
Part Number 534569 Rev. D
N/D367s Part Number: 301341-000
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/553-5992 or 402/467-5321
For technical assistance, contact Technical Support at:
800/392-3497 or 952/736-4656
Specifications subject to change without notice.
Loading...