Electro-Voice MB3 User Manual
MB3
Wall/Ceiling
Mounting Bracket
Installation Instructions
MB3 Wall/Ceiling Mounting Bracket Kit
The MB3 Wall/Ceiling Mounting Bracket Kit features robust brackets and hardware that allow for a Zx3 loudspeaker
to be quickly and easily mounted to a wall or ceiling in almost any position to obtain the desired sound coverage.
Figure 1: Suspending the Zx3 from a wall using the MB3
Figure 2: Suspending the Zx3 from a ceiling using the MB3
Item B
Item D
(x2)
Item E
Item C
(x4)
Figure 3: Removing hardware on the Zx3 Figure 4: Installing the Spanning Brackets
Step 1: Attach Spanning Brackets
Remove the single-stud fittings on the top of
the enclosure by removing the four screws, and
remove the two decals on the bottom of the enclosure by using a knife or razor blade (Figure 3).
Install the four spacers (Item D) and two spanning
brackets (Item B), using the eight flat head screws
(Item C). Thread two M8 cap screws (Item E) into
the front threaded hole of each spanning bracket,
until they are flush with the bottom of the spanning
bracket (Figure 4).
Item D
(x2)
Item B
Item C
Item E
(x4)
MB3 Mounting Bracket Includes
Item Description Qty.
A U-Bracket 1
B Spanning Bracket 2
C Screw, 10-32 x 1-3/4”, Flat Head 8
D Spacer 4
E Socket Head Cap Screw, M8x20mm 4
F Washer, M8 2
G Lock Washer, M8 2
Loading...