Specifications and Main Features
- Mono input of 16 or 24 channels.
- Signal routing is proposed to 6 aux sends, stereo and mono master outputs, and to 4 subgroups.
- Microphone and TRS ¼-inch line jack inputs are both balanced through XLR.
- With 2 fixed 2-band EQs, 4 stereo input channels are equipped.
- Six Aux sends for every mono input channel.
- Mix conditions are achieved using 100 mm faders.
- Semi-parametric mid-range 3-band EQ on mono input channels.
- 4 subgroup mixing busses with 100mm faders.
- Each of the mono input channels is equipped with insert input/output.
- A monitoring method which permits listening to the output of a group of channels after the fader has been set.
- For recording outputs and tape inputs that are separate.
- Basic 48 V phantom power supply that can be used worldwide.
- For illuminating the panel, a BNC-type Littlelite connector is used.
- 14 dB 20-20 kHz ensures that total harmonic distortion is <0.1%
- +1 dB 20-20 kHz frequency response with -2 dB frequency shift.
- The gain of +24 Db at main stereo outputs 600 Ohms.
- Typical Hum and noise is -127dB equivalent input noise.
- 84dB Mic input to Stereo Master is the Maximum voltage gain.
- Between input channels > -70 dB crosstalk at 1 kHz.
- Input channel equalization: High (12 kHz shelving), Mid (250 Hz — 5 kHz peaking), Low (80 Hz shelving)
- Size(HxWxD): 16-channel: 128 x 796 x 623 mm, 24-channel: 128 x 1020 x 623 mm
- Weight: 16-channel: 21 kg / 46.2 lb, 24-channel: 26 kg / 57.2 lb
Frequently Asked Questions
Q: What is the quantity of the mono input channels with respect to M4 Mixing Console?
A: Either 16 or 24 mono input channels are available in the M4 Mixing Console.
Q: What inputs does this mixer M4 Mixing Console accept?
A: It takes balanced XLR microphones or balanced TRS ¼ inch line jacks.
Q: Microphones, do they need external power source? Is it available at the console?
A: Yes, It is feasible and the power universally provided is 48 V for condenser microphones and boxes directly.
Q: M4 is said to have some frequency range, what is it exactly?
A: The frequency response is 20 — 20 kHz, +1 dB, -2 dB.
Q: Is it possible for me to monitor some of the individual channels of M4 Mixing Console or any other device similarly?
A: You can set a Pre-Fader Listen (PFL) to be able to monitor some channels or signals that are coming out of the headphone output before the fader.
Q: There are dual stereo outputs; what is the highest level of their output?
A: The balance output level is +24 dB at main stereo outputs of 600.
Q: Are stereo inputs compatible with the M4 Mixing Console?
A: Certainly, it has four (4) stereo input channels for stereo input routing.
Q: Other than the mono input channels, what types of equalization are available to them?
A: Mono inputs have a three band equalizer with variable mid range, high shelving, mid peaking and low shelving.
User Manual
Loading...