Page 1
Key Features:
• Lightweight – just 0.9 ounces (25
grams), less cable
• Behind-the-head headband is comfortable and stays in place
• Cardioid pickup pattern ensures good
gain before feedback
• Frequency response and proximity
effect similar to handheld vocal mics
HM2
Headworn Microphone
The Electro-Voice HM2 headworn microphone is the ideal
microphone for anyone who requires high-quality vocals in a
hands-free application. The HM2 is perfect for use by lead
vocalists, singing instrumentalists, dancers, aerobic instructors
and other presenters.
The HM2 has a miniature electret condenser element designed
with a cardioid polar pattern, which attenuates background noises
such as sound from nearby floor monitors, on-stage musical
instruments and crowd noise. The furnished open-pore
windscreen slips over the microphone element to reduce wind
noise and minimize P-popping – the excessive explosive breath
noise caused by overemphasized “p” and “t” sounds.
The Electro-Voice HM2 headworn microphone employs a
comfortable and inconspicuous behind-the-head headband and
flexible boom arm in an attractive Nonreflective black matte finish.
The flexible boom, which descends from the right of the headband,
is enclosed with protective shrink tubing to shield the boom arm
from deterioration and to prevent the flexible tube from catching
on facial hair. The facial features of the performer or speaker will
not be obstructed due to the HM2’s unobtrusive design. The
headband and microphone boom adjust to fit any performer or
speaker.
The HM2 is designed to have a frequency response similar to a
handheld vocal microphone. The HM2 headset exhibits bassboost (proximity-effect) warmth that many vocalists prefer. The
amount of proximity effect can be adjusted by moving the
microphone element closer or farther away from the mouth.
The HM2 is permanently connected to a 1.2-m (4 ft) shielded
cable terminated with a miniature Switchcraft TA3F connector.
Technical Specifications:General Description:
tnemelEgnitareneGresnednoCtertcelE
esnopseRycneuqerF
:)ecnatsid.ni-2/1(
:)zH0001ta
:nrettaPraloPdioidraC
:hsiniFkcalbevitcelfernoN
:elbaCtuptuO
:rotcennoCtuptuO
:)rotcennoc
egatlovtiucricnepo(ytivitisneS
:noitrotsiD%1,LPSmumixaMBd021
:stnemeriuqeRrewoPcdV01ot1
:cdV9tatnerruCgnitarepO005 µ xamA
:dehsinruFseirosseccAneercsdniwkcalB
:seirosseccAlanoitpO
:dnabdaeH,snoisnemiD
:enohporciM,snoisnemiD
dnaelbacssel(thgieWteN
zH000,81-03
086(lacsaP/Vm4 Ω )daol
mm5.2,gnol)tf4(m2.1
erutainim;retemaid).ni01.0(
yltnenamrepelbacoidua
enohporcimneewtebdehcatta
rotcennocdna
,dleihs1nip(F4ATtfarchctiwS
3nip,oidua/saib4&2nip
)C/N
VEneercsdniwtnemecalpeR
551978.ontrap
talanimon).ni5.5(mm041
).ni6(mm061:tnioptsediw
mramoob
mm81,gnol).ni41.1(mm92
66.0(mm8.61,ediw).ni7.0(
peed).ni
)zo9.0(smarg52
Page 2
Microphone Placement:
Warranty (Limited):
The headband can be worn in several different ways: Over the top of the
head. (Some aerobics instructors prefer this because they wear their
sweatband perpendicular to the headband.) Behind the back of the
neck. (This lets you hide the headset in your hair very easily.)
The flexible boom allows adjustment relative to the right corner of your
mouth. To find the optimum location of the microphone, perform the
following steps during the sound check:
1. Center the microphone element in front of your mouth by
bending the flexible boom up or down.
2. If P-popping is detected, bend the flexible boom and move the
microphone element further away from you mouth.
3. If the sound is thin and weak, move the microphone element
closer to your mouth and try raising or lowering the microphone
element.
Experiments indicate that the best control of P-popping is to position the
microphone element off to the side of the mouth, away from the center.
If distortion or flawed audio is heard, check the overload LED on the
transmitter. If the LED is flashing with voice peaks, adjust the
transmitter’s attenuation control until the overload stops. Also, check
the condition of the transmitter’s battery and replace if necessary.
Frequency Response (at 1/2-inch):
Electro-Voice products are guaranteed against malfunction due to defects
in materials or workmanship for a specified period, as noted in the
individual product-line statement(s) below, or in the individual product
data sheet or owner’s manual, beginning with the date of original
purchase. If such malfunction occurs during the specified period, the
product will be repaired or replaced (at our option) without charge. The
product will be returned to the customer prepaid. Exclusions and
Limitations: The Limited Warranty does not apply to: (a) exterior finish or
appearance; (b) certain specific items described in the individual productline statement(s) below, or in the individual product data sheet or owner’s
manual; (c) malfunction resulting from use or operation of the product
other than as specified in the product data sheet or owner’s manual; (d)
malfunction resulting from misuse or abuse of the product; or (e)
malfunction occurring at any time after repairs have been made to the
product by anyone other than Electro-Voice or any of its authorized
service representatives. Obtaining Warranty Service: To obtain warranty
service, a customer must deliver the product, prepaid, to Electro-Voice or
any of its authorized service representatives together with proof of
purchase of the product in the form of a bill of sale or receipted invoice. A
list of authorized service representatives is available from Electro-Voice
at 8601 E. Cornhusker Hwy., Lincoln, NE 68507 (402/467-5321 or 800/
553-5992 or Fax 402/467-3279) and/or Electro-Voice West, at 8234
Doe Avenue, Visalia, CA 93291 (209/651-7777 or 800/825-1242).
Incidental and Consequential Damages Excluded: Product repair or
replacement and return to the customer are the only remedies provided
to the customer. Electro-Voice shall not be liable for any incidental or
consequential damages including, without limitation, injury to persons
or property or loss of use. Some states do not allow the exclusion or
limitation of incidental or consequential damages so the above limitation
or exclusion may not apply to you. Other Rights: This warranty gives you
specific legal rights, and you may also have other rights which vary from
state to state.
Polar Response:
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 5/2002
Part Number 38109-890 Rev A
Electro-Voice Wireless Systems are guaranteed against malfunction
due to defects in materials or workmanship for a period of one (1) year
from the date of original purchase. The Limited Warranty does not extend
to cables or cable connectors. Additional details are included in the
Uniform Limited Warranty Statement.
Service and repair address for this product: Electro-Voice, Inc., 8601 E.
Cornhusker Hwy., Lincoln, NE 68507 (402/467-5321 or 800/5535992 or Fax 402/467-3279).
Specifications subject to change without notice.
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
Loading...