Electro-Voice FRI-15264 EDS User Manual

Key Features

• Compact, Easily Arrayable Cabinets

• RMDtm –Ring Mode Decoupled

• 3" Pure Titanium HF Compression Driver

• Available in 3 different Horn Patterns

• Switchable Passive or Active Operation

• Available in Black, White or Unfinished

• Manufactured with Pride in the United States

• Cloth Coverable Grills

• Paintable Enclosure

FRI+152/64

15-Inch Two-Way Full-Range

Passive or Active

Speaker System

General Description

The Fri+ series of Professional Fixed Install Speakers deliver
a broad range of performance options including multiple horn
patterns, easily switchable passive or bi-amp operation, and
EV’s World renown transducer technology for response that
is smooth and linear. The Fri+ is an economical and flexible
solution for the most demanding installations. Offering superior
performance, the Fri+152/64 is also equipped with 12­recessed shoulder bolted suspension points for easy flying
and each cabinet includes 3, 3/8" forged eye-bolts for
convenience. All Fri+ speakers have a vertical box height of
28" allowing neat, concise and visually appealing arrays. The
fully rotatable horns allow the installer to construct arrays
covering the most demanding acoustical environments while
maintaining an aesthetic and uniform installation. The structural
integrity of the Fri+ cabinets allow for vertical arrays up 3 boxes
in depth. Fri+ speakers are specifically recommended for
demanding, cost conscious installations such as Houses of
Worship, Nightclubs, Live Music Venues, and mutli-use spaces
such as Gymnasiums and Auditoriums. All Fri+ speakers
employ EV’s exclusive Ring Mode Decoupling (RMD
high performance, World Class EV transducer design and
technology to ensure maximum speech intelligibility and
musical clarity. Additionally, all Fri+ systems are available in
Black, White and Unfinished options.

tm

) and

Technical Specifications

1

esnopseR.qerF

1

egnaR.qerF

1

Full Space measurement. Half Space use will improve LF response.

:)Bd3-(zHk51-zH07

:)Bd01-(zHk61-zH24

:LPSdetaluclaCxaMBd921

:egarevoClatnoziroH°06

:egarevoClacitreV°04

:gnildnaHrewoPFLkaePW0041,suounitnoCW053

:gnildnaHrewoPFHkaePW042,suounitnoCW06

:ytivitisneS)m1/W1(Bd89

:recudsnarTFLrevirD)mm003("51HFB51LD

:recudsnarTFHrevirDnoisserpmoCtixe)mm67("37HD

:srotcennoCspirtsreirrabowT

:lairetaMerusolcnEdoowylpdetanimal-niarg-ssorcylp-7

:ellirGleetsAG61detarofrepdetaoCredwoP

:cepSlatnemnorivnE42PI925CEI

018DTSLIM

:)DxWxH(miD"42.32x"71.91x"29.72

:)hcae(thgieWteN)gk0.43(sbl57

:thgieWgnippihS)gk5.93(sbl78

)mm095xmm784xmm117(

FRi+152/64 Full Range Loudspeaker

Horizontal Off Axis Frequency Response:Frequency Response (Full Space):

Vertical Off Axis Frequency Response (up):Beamwidth:

Block Diagram:

Vertical Off Axis Frequency Response (down):Directivity:

Engineering Data Sheet

Horizontal 1/3 Octave Polars: Vertical 1/3 Octave Polars:

Dimension Drawings:

Top View

Front View Side View

Architectural & Engineering Specs:

The two-way full range loudspeaker system shall incorporate a 15” LF transducer and a 3” (76mm) voice coil HF compression driver.
The LF driver shall be mounted in a vented enclosure tuned for optimum low-frequency response. The HF driver shall be loaded on
a constant-directivity horn with a nominal coverage pattern of 60° (h) x 40° (v). An internal passive filter network shall provide
acoustical crossover and system equalization. Input panel shall easily change from passive to biamp operation via internal connector.
System frequency response shall vary no more than +/-3 dB from 70 Hz to 15 kHz measured on axis. The loudspeaker shall
produce a sound pressure level (SPL) of 98 dB on axis at 1 meter. It shall handle 350 watts of amplifier power long term (EIA
Standard), and shall have a nominal impedance of 8 ohms. The loudspeaker enclosure shall be trapezoidal in shape. It shall be
constructed of 7-ply cross-grain-laminated plywood and shall employ extensive internal bracing. It shall be finished in aliphatic
polyurethane. Input connectors shall be two at 2 terminal barrier strips. A total of twelve 3/8-16 threaded mounting/suspension points
shall be provided, (three each on top and bottom, two per side, two on rear). The front of the loudspeaker shall be cloth coverable with
a powder-coated perforated 16 GA steel grille.

The two-way loudspeaker shall be the Electro-Voice model FRi+152/64.

FRi+152/64 Part Numbers: 301210-000, 301210-001, 301210-002

12000 Portland Avenue South, Burnsville, MN 55337
Phone: [phone], Fax: [phone]

www.electrovoice.com

© Telex Communications, Inc. 2/2002

Part Number 38110-044 Rev. A

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: [phone]

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265

Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 887-9212

For warranty repair or service information, contact the Service Repair department at:

800/685-2606

For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.