Electro-Voice EVID SOS 32 User Manual
EVID 3.2 SOS Monitor and MA-3 Mic Stand Adapter
The EVID 3.2 SOS is a near-field monitor with volume control and
¼ input jack that can be easily mounted on a microphone stand
for convenient placement anywhere. An adjustable swivel lets you
mount it at exactly the right angle for any application. A boom
adapter is also included to mount an optional boom and
microphone (not included)*
MA-3 Mic Stand Adapter kit lets you mount any standard EVID 3.2
on a microphone stand for easy placement anywhere you need it.
CAUTION: This system is rated for 75W RMS.
When connecting the EVID 3.2 SOS to the
amplifier, make sure that the amplifiers
power output does not exceed this rating.
MA Series
SOS 3.2 Series
Assembly Instructions
:sedulcnItiK3-AM
metIytQnoitpircseD
11 retpadAdnatSciM
21 retpadAmooB
32 ).D.I"52.,.D.O"88.(rehsaWtalF
metIytQnoitpircseD
11 retpadAdnatSciM
21 retpadAmooB
32 ).D.I"52.,.D.O"88.(rehsaWtalF
41 kcaJ"4/1htiw,rotinoM2.3DIVE
51 tnuoMenohporciMfoorP-kcohS
Positioning for Boom and Microphone EVID 3.2 SOS Rear Panel Detail
1/4” Input Jack
:sedulcnIrotinoMSOS2.3DIVE
Correct Incorrect
*To ensure proper balance, when a
boom and microphone are attached, the
EVID must be angled upward and the
booms counterweight properly
positioned as shown.
Volume Control
Knob
Step 1:
Step 2:
Step 3:
Mic Stand Mounting (MA-3 and SOS)
Attach the Mic Stand Adapter (Item 1) to
your microphone stand (not included).
Attach the EVID 3.2 (or the 3.2 SOS) to the
Mic Stand Adapter using one flat washer
(Item 3) in-between the Adapter and the
EVID.
Use the adjustment knob to adjust the angle
of the EVID.
If not attaching a boom to the EVID, attach
Logo Cap as shown.
Item 4
Item 1
Logo Cap
(Included with
standard EVID 3.2)
Item 3
Adjustment
Knob
Step 1:
Step 2:
Step 3:
Mounting a Microphone and Boom to your EVID (MA-3 and SOS)
Attach the Boom Adapter (Item 2) to the top
of the EVID with a flat washer (Item 3) in
between the Adapter and the EVID.
Mount the Boom (Not Included) to the Boom
Adapter (Item 2).
Replace any microphone mount with the
Shock-Proof Mic Mount (Item 5, EVID 3.2
SOS only).
Item 3
Item 2
Item 1
Boom
(Not Included)
Item 5
(Included only with
EVID 3.2 SOS
Monitor Package)
Item 4
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 2/2003
Part Number 38110-087 Rev C
U.S.A. and Canada only. For customer orders,
contact the Customer Service department at
Europe, Africa and Middle East only. For customer orders,
For warranty information, contact the Service Repair department at:
For technical assistance, contact Technical Support at:
Specifications subject to change without notice.
800/392-3497 Fax: 800/955-6831
contact the Customer Service department at
49 9421-706 0 Fax: 49 9421-706 265
616/695-6831 or 800/685-2606
866/78AUDIO
Loading...