Electro-Voice EVID-S12.1B, EVID-S12.1W Installation Manual
EVID-S Surface Mount 12” Subwoofers
EVID-S12.1B | EVID-S12.1W
en | Installation manual
Table of contents
en 3
1
1.1 Suspension 4
1.2 Notices 4
2
2.1 System features 5
2.2 Product information 5
2.3 Packing list 6
3
4
5
6
6.1 Dimensions 11
6.2 Frequency response and impedance 12
7
Safety 4
Introduction 5
Installation 7
Wiring 9
Troubleshooting 10
Technical data 11
Appendix A: painting process 13
Electro-Voice Installation manual 2017.08 | 01 | F.01U.347.028
!
EVID-S Surface Mount 12” Subwoofers
1
1.1
Safety
Old electrical and electronic appliances
Electrical or electronic devices that are no longer serviceable must be collected separately and
sent for environmentally compatible recycling (in accordance with the European Waste
Electrical and Electronic Equipment Directive).
To dispose of old electrical or electronic devices, you should use the return and collection
systems put in place in the country concerned.
Suspension
Warning!
Suspending any object is potentially dangerous and should only be attempted by individuals
who have a thorough knowledge of the techniques and regulations of suspending objects
overhead. Electro-Voice strongly recommends all loudspeakers be suspended taking into
account all current national, federal, state, and local laws and regulations. It is the
responsibility of the installer to ensure all loudspeakers are safely installed in accordance
with all such requirements. When loudspeakers are suspended, Electro-Voice strongly
recommends the system be inspected at least once per year or as laws and regulations
require. If any sign of weakness or damage is detected, remedial action should be taken
immediately. The user is responsible for making sure the wall, ceiling, or structure is capable
of supporting all objects suspended overhead. Any hardware used to suspend a loudspeaker
not associated with Electro-Voice is the responsibility of others.
Redundant safety point
As an added safety measure, it is suggested the user install an extra suspension point back to
the building structural supports. This redundant safety point should have as little slack as
possible (less than 1-inch is preferable).
1.2
Notices
Copyright and disclaimer
All rights reserved. No part of this document may be reproduced or transmitted in any form by
any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior
written permission of the publisher. For information on getting permission for reprints and
excerpts, contact Electro-Voice.
The content and illustrations are subject to change without prior notice.
2017.08 | 01 | F.01U.347.028 Installation manual Electro-Voice
A
B
C
E
D
en 5
2
2.1
Introduction
The EVID-S12.1 subwoofer, from Electro-Voice, is a compact, high-performance, dual voice coil
loudspeaker with outstanding performance for the most demanding professional and
commercial sound applications. Designed and engineered for use in background and
foreground music, and sound reinforcement applications, the EVID-S12.1 subwoofer is the
ideal solution for indoor applications, such as restaurants, bars, patios, retail, fitness clubs,
hospitality, theme parks, leisure venues, and others. The EVID-S12.1 subwoofer is the perfect
solution for a wide variety of surface mount applications.
The EVID-S12.1 subwoofer comes with a dual mode mounting bracket that enables the unit to
be easily mounted at either a wall/wall (corner) or on a wall/ceiling (mid-wall) junction. The
included forged steel eyebolt provides the installer a solid attachment point for a safety line.
The EVID-S12.1 subwoofer may also be safely installed protruding just 2-3/4" down through a
standard suspended ceiling grid.
Read through this manual to familiarize yourself with the safety information, features, and
applications before you use these products.
System features
▪ High-excursion 12" woofer with dual voice coil to accommodate L & R channels
▪ 200 W power handling provides for 127 dB maximum SPL (133 dB Peak)
▪ Crossover input panel included
2.2
Product information
Figure 2.1: Product information
Item
A Dual-mode mounting bracket
B Acoustic ports
C Bracket clip mounting points
D Safety line attachment eyebolt
E Input/output connector panel
Description
Table 2.1: Product information
Electro-Voice Installation manual 2017.08 | 01 | F.01U.347.028
Loading...