Electro-Voice EVID MA Series, EVID MA-3, EVID SOS 3.2 Series, EVID 3.2 SOS Assembly Instructions Manual

EVID 3.2 SOS Monitor and MA-3 Mic Stand Adapter

The EVID 3.2 SOS is a near-field monitor with volume control and
¼ input jack that can be easily mounted on a microphone stand
for convenient placement anywhere. An adjustable swivel lets you
mount it at exactly the right angle for any application. A boom
adapter is also included to mount an optional boom and
microphone (not included)*

MA-3 Mic Stand Adapter kit lets you mount any standard EVID 3.2
on a microphone stand for easy placement anywhere you need it.

MA Series

SOS 3.2 Series

Assembly Instructions

:sedulcnItiK3-AM

metIytQnoitpircseD

11 retpadAdnatSciM

21 retpadAmooB

32 ).D.I"52.,.D.O"88.(rehsaWtalF

:sedulcnIrotinoMSOS2.3DIVE

metIytQnoitpircseD

11 retpadAdnatSciM

21 retpadAmooB

32 ).D.I"52.,.D.O"88.(rehsaWtalF

41 kcaJ"4/1htiw,rotinoM2.3DIVE

51 tnuoMenohporciMfoorP-kcohS

1/4” Input Jack

Volume Control

Knob

Positioning for Boom and Microphone EVID 3.2 SOS Rear Panel Detail

*To ensure proper balance, when a

boom and microphone are attached, the

EVID must be angled upward and the

booms counterweight properly

positioned as shown.

Correct Incorrect

CAUTION: This system is rated for 75W RMS.

When connecting the EVID 3.2 SOS to the

amplifier, make sure that the amplifiers

power output does not exceed this rating.

All manuals and user guides at all-guides.com

all-guides.com

U.S.A. and Canada only. For customer orders,

contact the Customer Service department at

800/392-3497 Fax: [phone]

Europe, Africa and Middle East only. For customer orders,

contact the Customer Service department at

49 9421-706 0 Fax: [phone]

For warranty information, contact the Service Repair department at:

616/695-6831 or 800/685-2606

For technical assistance, contact Technical Support at:

866/78AUDIO

Specifications subject to change without notice.

12000 Portland Avenue South, Burnsville, MN 55337
Phone: [phone], Fax: [phone]

www.electrovoice.com

© Telex Communications, Inc. 2/2003

Part Number 38110-087 Rev C

Mounting a Microphone and Boom to your EVID (MA-3 and SOS)

Step 1:

Attach the Boom Adapter (Item 2) to the top
of the EVID with a flat washer (Item 3) in

between the Adapter and the EVID.

Step 2:

Mount the Boom (Not Included) to the Boom
Adapter (Item 2).

Step 3:

Replace any microphone mount with the
Shock-Proof Mic Mount (Item 5, EVID 3.2
SOS only).

Item 1

Item 4

Item 3

Item 2

Item 5

(Included only with

EVID 3.2 SOS

Monitor Package)

Boom
(Not Included)

Mic Stand Mounting (MA-3 and SOS)

Step 1:

Attach the Mic Stand Adapter (Item 1) to
your microphone stand (not included).

Step 2:

Attach the EVID 3.2 (or the 3.2 SOS) to the
Mic Stand Adapter using one flat washer
(Item 3) in-between the Adapter and the

EVID.

Step 3:

Use the adjustment knob to adjust the angle
of the EVID.

If not attaching a boom to the EVID, attach
Logo Cap as shown.

Item 1

Item 4

Item 3

Adjustment
Knob

Logo Cap
(Included with
standard EVID 3.2)

All manuals and user guides at all-guides.com