Electro-Voice EVID-C6.2 Datasheet

Electro-Voice | EVID-C6.2 Ceiling speaker 6.5" white

EVID-C6.2 Ceiling
speaker 6.5" white

▪ Full bandwidth overload protection

▪ Front baffle wattage tap adjustment

▪ Includes tile bridge and mounting ring for easy

installation

▪ UL1480A and CSA 22.2 205 certified

The Electro-Voice EVID-C6.2 loudspeaker system is a
complete two-way ceiling loudspeaker. The package
consists of a bezel assembly, grille, rear enclosure,

6.5-inch coax two-way loudspeaker and internal line­matching transformer. The loudspeaker features a
waveguide coupled titanium coated dome tweeter. The
EVID-C6.2 loudspeaker utilizes a 2nd order crossover
network at 2.5 kHz, with a comprehensive protection
circuit to protect the network, woofer, and tweeter
drivers from excessive power levels. The EVID-C6.2
utilizes a transformer that offers a selection of 1.88
(70-V only), 3.75, 7.5, 15W or 30 watts delivered to the
loudspeaker system using either 70-V or 100-V lines, or
8 ohm bypass. Selection is via a convenient switch on
the front baffle. The perforated grille is finished in
semi-gloss white powder-coated enamel. The baffle
and bezel are constructed from UL 94V-0 rated ABS.
The rear enclosure is constructed from zinc-plated,
heavy gauge steel. The low profile enclosure makes it
easy to mount in very tight spaces. A rear cover, with
provisions for a junction box fitting, provides access to
a 4-pin terminal block that allows direct connection to
the speaker with 12 gauge wire and provides pass
through to additional speakers. A tile bridge is
included for safe suspension of the EVID-C6.2 ceiling
systems in a drop ceiling that uses mineral wool, or
other fiber-based ceiling tiles. The EVID line of ceiling
speakers has been designed to work together as a
complete system in a wide range of different ceiling

constructions. They provide wide dispersion, high­efficiency, high-maximum output, ease of installation,
and wide-range reproduction of music or voice.

Technical specifications

Frequency response: 50 Hz - 20 kHz

Sensitivity (SPL 1 W/1 m):

Coverage pattern: 120° conical

Power handling (@ 8Ω): 75 W (with overload protection)

Rated Impedance:

Recommended High-Pass

frequency:

Input configuration: 8Ω; 70V/100V

70V/100V power taps: 1.8 (70V only)/3.7/7.5/15/30 W

LF transducer:

HF transducer: 1 in (25 mm) Ti-coated dome

Mounting system:

Acoustic design: Ported cabinet, two-way design,

90 dB

8 Ω

60 Hz

6.5 in (165 mm) high-compliance
driver (weatherized cone)

Integrated 4-point toggle anchors

internally damped, w/passive
crossover

2 | EVID-C6.2 Ceiling speaker 6.5" white

Represented by:

Germany:

Bosch Sicherheitssysteme GmbH
Robert-Bosch-Ring 5
85630 Grasbrunn
Germany

Bosch Security Systems, Inc.
12000 Portland Avenue South
Burnsville MN 55337
USA

www.electrovoice.com

© Bosch Security Systems 2018 | Data subject to change without notice
Document Number | Vs1 | 06. Nov 2018

Cabinet construction: Steel enclosure and UL94V-0

rated baffle and bezel

Grille construction:

Powder-coated steel

Color: White (paintable)

Cutout dimensions (diam.): 10.6 in. (269 mm)

Dimensions (depth x diam.):

7.0 in. x 11.8 in. (190 mm x 300
mm)

Net weight:

10 lb (4.5 kg)

Included accessories: Tile bridge, mounting ring

Safety agency ratings: UL 1480

Safe for use in air handling spaces
per UL 2043

Architectural and engineering specifications:

The EVID C6.2 loudspeaker system shall be comprised
of a UL 94V-0 fire rated ABS baffle/bezel assembly,
zinc plated steel rear enclosure, powder coated grille
with safety tether, transformer with 8 ohm bypass,
and 6.5-inch polypropylene low frequency transducer
with coaxially-mounted waveguide coupled 1 inch
titanium coated dome tweeter. The loudspeaker shall
meet the following criteria: power rating shall be 75
watts of EIA RS-426A pink noise (6 dB crest factor).
Frequency response, uniform from 50 Hz to 20 kHz.
Pressure sensitivity, 90dB SPL at 1 meter (3.3 feet) on
axis with one watt of pink noise (ref. 20µPa). Minimum
impedance, 6.0 ohms. The loudspeaker shall be 190
mm (7.0 in.) deep and 300 mm (11.8 in.) in diameter.
Weight shall be 3.32 kg. (7.35 lb) The coaxial ceiling
loudspeaker shall be the Electro-Voice model
EVID-C6.2.

Quantity Component

2 C-ring supports

2 Grilles

1 Owner’s manual

4

Support ring screws

2 Terminal connectors

1 Service center card

1

Cutout template

2 Paint shields

Ordering information

EVID-C6.2 Ceiling speaker 6.5" white

Two-way 6.5" ceiling speaker, with internal 30W
70/100 volt line transformer with 8 Ohm bypass,
(packaged in pairs), white

Order number EVID C6.2

Accessories
RPK-82-B RPK-82 KIT, ROUGH IN PLATE W/JUNCTION

BO

RPK-82 Kit, Rough in plate w/junction box

Order number RPK-82-B

RR-82-B RR-82 KIT, ROUGH-IN MOUNTING PLATE, EVID

Rough-in mounting plate for new construction for use
with the EVID C4.2 (4 pcs)

Order number RR-82-B

Parts included

Quantity Component

2 Speaker systems

4

Tile rails