Electro-Voice EVID 6.2 User Manual
Key Features:
k
• Line-array enhanced coverage control
• Organic, unobtrusive shape
™
• Strong-Arm-Mount
aiming
• Full-bandwidth overload protection
• Weather resistant - Conforms to Mil
Spec 810 and IEC 529 IP 34
• Dual 6-inch LF transducers for extended
bass and greater power handling and
output
for easy, flexible
Model 6.2
Extended Range
High Output Speaker
• Ti direct-radiator HF transducer, Neodymium structure
• High sensitivity
• Magnetically shielded
• Zinc-plated grilles
• Transformer Versions
General Description:
The EVID 6.2 is an extended-range loudspeaker ideal for
indoor and outdoor applications requiring high-quality sound.
Its extended range and smooth bass provide ample SPL
levels in larger environments such as shopping malls, sports
bars, health clubs, and so on.
The 6.2’s three-dimensional elliptic baffle symmetrically
locates the 1” Ti direct radiator high-frequency element with a
Coherent Coverage Waveguide in front of and between the
6” low-frequency drivers. The careful shaping, location, and
10° splaying of the LF units provide coverage control by the
resulting line array. Lobing is controlled by physically
“shadowing” the LF transducers from each other over the
bandwidth where they would normally exhibit interference.
EVID’s mounting system provides greater range of aiming
angles in both horizontal and vertical planes than other types.
The curved grille features designed-in weather resistance
and a hidden leash for safety.
All models are available in black or white, and can easily be
painted to match the décor. Transformer versions are also
available for constant voltage systems.
Technical Specifications:
1
2
gnildnaHrewoP
3
ytivitisneS
ecnadepmIsmho8
LPSxaMBd811
egarevoClacitreV
recudsnarTFL)mm001(”6x2
recudsnarTFH)mm52(”1
noitcetorPmetsySlluF
eW
noitatoRxgniwS°09x
slanimreTgnirpS
)DxW
xH(miD
1
2
ar
3
4
esnopseRycneuqerF
4
egarevoClatnoziroH
4
ycneuqerFrevossorCzHk6.1
ecnatsiseRrehta
lairetaMerusolcnE)elbatniap(SBA
)hcae(thgieWteN)gk3.5(sbl21
)riap(thgieWgnippihS)gk3.21(sbl72
seirosseccAdedulcnIMAS
)Bd01-(zHk02-zH26
°001
°08
°001
spaTegattaWnoisreV”t“
)gnitnuomllaw(ecapSflaH
)gnitnuomllaw(ecapSflaH:gvA
W5.7:V07
™
enalplacitrevnisixagnolhtiwdetnuomnehW
aePW006/.gorP.tnoCW003
m1/W1,Bd49
,ytidimuh018cepSliMsteeM
dnaerutarepmet,yarpstlas
43PI925CEIdna,VU
sgnitarfoorphsalps
W06,W03,W51:V001/V07
)mm892xmm822
yekxeh,
)rotcaftsercBd6htiwesionknipdepahs-CEI(gnit
xmm914(”57.11x"9x”5.61
esionknipsuounitnocnahtretaergBd3:gnitaRmargorPsuouonitnoC
Architecture & Engineering Specs:
The loudspeaker shall be a two-way system consisting of two 6” (152mm)
low-frequency transducers, a 1” (25mm) high-frequency transducer with
a Coherent Coverage Waveguide, and a frequency-dividing network
installed in a vented, line-array enclosure. The network shall include a
passive limiter for both the low-frequency and high-frequency transducers.
The loudspeaker system shall meet the following performance criteria:
Power handling, 300-Watts of EIA RS-426A continuous pink noise (6 dB
crest factor); Frequency response, 62 Hz - 20 kHz (-10 dB from rated
sensitivity); Pressure sensitivity, 94 dB at one watt, 200 Hz -10 kHz at one
meter; Impedance, 8 ohms nominal, 6 ohms minimum. The high-frequency
transducer shall drive a waveguide to cover evenly 100° horizontally by
90° vertically. The enclosure shall be molded of acrylic butyl styrene. The
enclosure shall be 16.5” (419mm) high, 9” (228mm) wide, 11.75”
(298mm) deep. The finish shall be a paintable black or white. The grille
shall be zinc plated, powder coated for corrosion resistance, and
restrained with a safety leash. The loudspeaker shall be adjustable over
a range of 100° horizontally and 90° vertically . The support bracket shall
be low profile and integral with the enclosure. The system shall be weather
resistant to MIL S pec 810 and IEC 529 IP 34 test conditions. The surface
mount loudspeaker shall be the Electro-Voice® EVID model 6.2.
Block Diagram:
Passive
INPUT
+
Limiter
HPF
LPF
Frequency Response:
Beamwidth:
Directivity:
Dimension Drawings:
Front
Top
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 12/2005
Part Number 38109-983 Rev E
Side
Wall Plate
Performance Match:
• EVID 12.1 Sub
Available Accessories:
• VS-6 Vertical Mount Desk Stand for 6.2
• AB-Z E Array Bracket Kit for 2 or 4 ZX1i or EVID Systems, Black
• TC-6B Black Weatherized Terminal Cover for 6.2
• TC-6W White Weatherized Terminal Cover for 6.2
EVID 6.2 Part Numbers:
301047-001 Black
301047-002 White
301047-003 Black, Transformer
301047-004 White, Transformer
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
Loading...