Electro-Voice EVID-40S Data Sheet
Electro-Voice | EVID S44
EVID S44
▪ A complete matched background/foreground music
speaker solution.
▪ Large 8-inch (200 mm) woofer transducer for
substantial low frequency output.
▪ Direct connection of satellites to subwoofer —
simplifies installation wiring.
▪ Mounting brackets with wide range of motion for
surface mount satellites provide easy and secure
mounting of speaker to wall.
▪ Convenient detachable phoenix style signal
connections speed up installation time.
The EVID Compact Sound Speaker System is a very
compact full-range loudspeaker ideal for applications
requiring high-quality sound. Its shape flexibility and
size make it nearly invisible for use in background/
foreground music systems for restaurants, bars,
patios, retail, and other applications. The system
consists of a high performance 8-inch subwoofer
module with a crossover network to support the
included four (4) 2-inch satellite speakers. The system
provides for easy signal connections at the subwoofer
and can support either 4/8 ohm or 70/100v signal
connections. Its high power handling allows the
system to be used in a wide variety of environments
and spaces to provide high quality background or
foreground music.
Technical specifications
EVID 2.1 EVID 40S
Frequency Response
180 Hz - 20 kHz
(-10 dB):
Power Handling: 30 W
Sensitivity: 84 dB
2
1
Impedance: 16 ohms Dual 8 ohm / mono
Maximum SPL: 100 dB
1
Voice Coverage (H x V): 150° x 150°
1
42 Hz - 300 Hz
200 W
88 dB
4 ohm
114 db
3
Omnidirectional
1
2
1
1
EVID 2.1 EVID 40S
Music Program
100° x 100°
4
Omnidirectional
Coverage (H x V):
Transducer: 50 mm (1.97 in) 200 mm (7.87 in)
Bracket Adjustment
160° x 60° Fixed
Range (H x V):
Connectors: Phoenix (2-pin) Phoenix (2-pin)
Enclosure: ABS (fire rated) Wood (MDF)
Transformer Taps: NA 100 W, 50 W, 25
W, 12.5 W
Dimensions (H x W x
115 mm x 85 mm x
D):
95 mm
(4.53 in x 3.35 in x
3.75 in)
400 mm x 400 mm
x 230 mm
(15.75 in x 15.75
in x 9.06 in)
Net Weight: (each) 0.5 kg (1.1 lb) 12.05 kg (26.55
lb)
Shipping Weight: 1 sub and 4 satellites: 18.26 kg (40.25 lb)
Included Accessories: Wall bracket; hex
wrench
Wall bracket; hex
wrench
1. Half space (wall mounting).
2. Long Term Program Rating, 3 dB greater than
continuous noise pink noise rating.
3. Average 1 kHz – 4 kHz.
4. Average 1 kHz – 8 kHz.
2 | EVID S44
System overview
Architecture and Engineering Specifications:
The loudspeaker system shall be a two-way design
consisting of a separate subwoofer containing one
8-inch (200 mm) low-frequency transducer, (4)
satellites consisting of 2 inch (50 mm) high-frequency
transducers, and frequency-dividing network installed
in the vented subwoofer enclosure. All input and
output signal connections shall be made at the
subwoofer. All signal connections for the subwoofer
and satellite speakers shall be made using phoenix
style connectors. The system shall be operable either
in stereo or monaural mode when powered with a 4/8
low impedance amplified source. The system shall be
capable of operating up to 100 watts when driven with
a 100V or 70V amplified source signal. The
loudspeaker system shall meet the following
performance criteria: Power handling, 200 watts of
Long Term Program Rating; Frequency response, 42 Hz
– 20 kHz (-10 dB from rated sensitivity); Impedance, 8
ohms nominal in stereo mode, 4 ohms nominal in
mono mode. The high frequency transducer in the
satellites speakers shall provide even coverage of a
minimum 100° horizontally by 100° vertically averaged
over a frequency range of 1-8 kHz and a minimum 150°
horizontally by 150° vertically averaged over a
frequency range of 1-4 kHz. The subwoofer enclosure
shall be constructed of MDF with a vinyl wrapped
exterior. The satellite speakers shall be constructed of
fire rated ABS. The subwoofer enclosure shall be
15.75 inch (400 mm) high, 15.75 inch (400 mm) wide,
and 9.06 inch (230 mm) deep. The satellite
loudspeakers shall be adjustable over a range of 160°
horizontally and 60° vertically. The support bracket
shall be low profile and fully detachable from the
enclosure. The surface mount loudspeaker system
shall be the EVID S44 or the EVID S44W models made
by Electro-Voice.
Frequency Response:
Dimensions:
Dimensions EVID-2.1 and mounting bracket
Dimensions EVID-40S and mounting bracket
Notice!
The mounting bracket dimension drawings
are not to scale. Drawing sizes increased for
readability.
Parts included
Quantity Description
2 Surface mount satellite speakers
2 Wall brackets
2 Speaker brackets
1 Data sheet
2 M6 hex drive pan-head screws
4 M5 pan-head screws
2 Screw sockets
1 Hex wrench
* Surface mount satellite speaker (1 box)
Quantity Description
1 Surface mount subwoofer
1 Wall bracket, assembled in box
1 Installation manual
4 M6 hex drive pan-head screws
Loading...