Electro-Voice EVID 32 EDS User Manual

Key Features:

• Line-array enhanced coverage control

• Organic, unobtrusive shape

TM

• Strong-Arm-Mount
aiming

• Full-bandwidth overload protection

• Weather resistant - Conforms to Mil
Spec 810 and IEC 529 IP 34

• Dual LF transducers for extended bass
and greater power handling and output

• Ti direct-radiator HF transducer , Neody­mium structure

for easy , flexible

Model 3.2

V ery Compact

Full-Range Speaker

• High sensitivity

• Magnetically shielded

• Zinc-plated grilles

• Transformer V ersions

General Description:

The EVID 3.2 is a very compact full-range loudspeaker ideal
for indoor and outdoor applications requiring high-quality
sound. Its shape and size make it nearly invisible for use in
background/foreground music systems for restaurants, bars,
patios, retail, and other applications

The 3.2’s three-dimensional elliptic baffle symmetrically
locates the .75” Ti direct radiator high-frequency element in
front of and between the 3.5” low-frequency drivers. The
careful shaping, location, and 10° splaying of the LF units
provide coverage control by the resulting line array. Lobing is
controlled by physically “shadowing” the LF transducers from
each other over the bandwidth where they would normally
exhibit interference. EVID’s mounting system provides greater
range of aiming angles in both horizontal and vertical planes
than other types. The curved grille features designed-in
weather resistance and a hidden leash for safety.

All models are available in black or white, and can easily be
painted to match the décor. Transformer versions are also
available for constant voltage systems.

Technical Specifications:

1

2

gnildnaHrewoP

3

ytivitisneS

ecnadepmIsmho8

LPSxaMBd801

egarevoClacitreV

recudsnarTFL)mm09(”5.3x2

recudsnarTFH)mm02(”57.

noitcetorPmetsySlluF

noitatoRxgniwS°09x°001

slanimreTgnirpS

)DxWxH(miD

1

2

gnitar

3

4

esnopseRycneuqerF

4

egarevoClatnoziroH

4

ycneuqerFrevossorCzHk4.2

ecnatsiseRrehtaeW

lairetaMerusolcnE)elbatniap(SBA

)hcae(thgieWteN)gk5.1(sbl3.3

)riap(thgieWgnippihS)gk9.3(sbl6.8

seirosseccAdedulcnIMAS

)Bd01-(zHk02-zH58

spaTegattaWnoisreV”t“V001W01/V07W5

)gnitnuomllaw(ecapSflaH

)gnitnuomllaw(ecapSflaH:gvA

°041

°001

™

enalplacitrevnisixagnolhtiwdetnuomnehW

kaePW003/.tnoCW57

m1,W1,Bd78

,ytidimuh018cepSliMsteeM

dnaerutarepmet,yarpstlas

43PI925CEIdna,VU

sgnitarfoorphsalps

xmm432(”5.6x”1.5x”2.9

)mm561xmm031

yekxeh,

esionknipsuounitnocnahtretaergBd3:gnitaRmargorPmreTgnoL

Architecture & Engineering Specs:

The loudspeaker shall be a two-way system consisting of two 3.5” (89mm)
low-frequency transducers, a .75” (19mm) high-frequency transducer,
and a frequency-dividing network installed in a vented, line-array
enclosure. The network shall include a passive limiter for both the low­frequency and high-frequency transducers. The loudspeaker system
shall meet the following performance criteria: Power handling, 75 Watts
of EIA RS-426A continuous pink noise (6 dB crest factor); Frequency
response, 85 Hz – 20 kHz (-10 dB from rated sensitivity); Pressure
sensitivity, 87 dB at one watt, 200 Hz – 10 kHz at one meter; Impedance,
8 ohms nominal, 6 ohms minimum. The enclosure shall be molded of
acrylic butyl styrene. The enclosure shall be 9.2” (234mm) high, 5.1”
(127mm) wide, 6.5” (165mm) deep. The finish shall be a paintable black
or white. The grille shall be zinc plated, powder coated for corrosion
resistance, and restrained with a safety leash. The loudspeaker shall be
adjustable over a range of 100° horizontally and 90° vertically. The support
bracket shall be low profile and integral with the enclosure. The system
shall be weather resistant to MIL Spec 810 and IEC 529 IP 34 test
conditions. The surface mount loudspeaker shall be the Electro-Voice®
EVID model 3.2.

Block Diagram:

Passive

INPUT

+

Limiter

HPF

LPF

Frequency Response:

Beamwidth:

Directivity:

Dimension Drawings:

5.1

[129.5]

9.2

[233.7]

Front

1.67

[42.4]

Top

12000 Portland Avenue South, Burnsville, MN 55337
Phone: [phone], Fax: [phone]

www.electrovoice.com

© Telex Communications, Inc. 8/2002

Part Number 38109-981 Rev C

Ø0.26 x 4

3.33

[84.7]

6.5

[165.1]

Side

2.75

[69.9]

1.0

[25.4]

Wall Plate

2.5

[63.5]

1.38

[34.9]

Performance Match:

• EVID 12.1 Sub

Available Accessories:

• MA-3 Microphone Stand Mounting Kit for 3.2

• HS-3 Horizontal Mount Desk Stand for 3.2/4.2

• VS-3 Vertical Mount Desk Stand for 3.2

• AB-32 180° Array Bracket Kit for two 3.2s

• AB-34 360° Array Bracket Kit for four 3.2s

EVID 3.2 Part Numbers:

301045-001 Black

301045-002 White

301045-003 Black, Transformer

301045-004 White, Transformer

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: [phone]

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265

Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 736-4212

For warranty repair or service information, contact the Service Repair department at:

800/685-2606

For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.