Page 1
Key Features:
DH7N 3” (76 mm) diaphragm, 1.4” (36 mm) exit •
pure titanium compression driver
SMX2151 15” (381 mm) LF transducer with fully •
symmetric drive
Advanced fourth-order crossover network with •
HF protection
Coverage pattern: 60° x 60° Constant •
DirectivityTM 12” rotatable waveguide
105 dB sensitivity, 138 dB maximum SPL•
System rating: 500 W continuous, 2000 W peak•
Active rating: LF 400 W/HF 75 W continuous •
(1600 W/300 W peak)
(28) M10 threaded suspension points•
PI and FG versions available with gland nut and •
stainless-steel grille
General Description:
The Electro-Voice EVH-1152D/66 is a high-power, two-way horn-loaded
coaxial loudspeaker system that can be used in a variety of applications where excellent sound reinforcement, wide bandwidth directivity
control, and high efficiency is required in a compact package.
The EVH-1152D/66 utilizes the DH7N, a high-output 3” titanium compression driver, coupled to a Constant Directivity™ 60° x 60° waveguide.
The SMX2151 15” woofer was developed using FEA optimization for
motor, suspension, and electrical design to ensure very low distortion,
high efficiency, and maximum intelligibility at high SPL. The crossover
uses steep, 24-dB-per-octave slopes with equalization for very smooth
response in the vocal range, linear off-axis response, and a protection
circuit for long-term reliability. This combination of technologies results
in a smooth response to 20 kHz and excellent pattern control down to
500 Hz.
The EVH-1152D/66’s features make it ideal for many fixed-install applications. The trapezoidal enclosure is constructed of weather-resistant
birch, and coated with EVCoatTM for protection from the elements. For
maximum protection against extreme outdoor elements, a fully-weatherized fiberglass version is available. The unique acoustic and rigging
design allows for vertical and horizontal clusters to be built using any
combination of loudspeakers from the entire EVF and EVH series. With
seven horn patterns to choose from, along with an assortment of lowfrequency and subwoofer loudspeakers, you have the tools to maximize flexibility of system design, no matter what the application and
budget. The innovative input panel provides a choice of Phoenix-style
connector (included in all standard models) or the ability to add a dual
NL4-type connector cover plate or gland-nut cover plate (for weatherizing applications). An externally accessible jumper selects passive or
active operation. An available 70.7/100-V transformer kit may be easily
mounted to the input panel for use in distributed systems. All these
features give you the flexibility to address a large range of venues,
quickly and precisely supporting customer requirements with fewer
items in inventory.
EVH-1152D/66
Single 15” Two-Way Coaxial
60° x 60° Full-Range
High-Efficiency
Loudspeaker System
Technical Specifications:
Freq. Response1 (-3 dB): 60 Hz - 17 kHz
Freq. Range1 (-10 dB): 50 Hz - 20 kHz
Rotatable Coverage: 60° x 60°
Rec. High-Pass Frequency: 60 Hz
Passive Crossover Freq.: 1300 Hz
Axial Sensitivity1: 105 dB (1 W/1 m)
Max. Calculated SPL1: 138 dB
Passive Power Handling2: 500 W continuous, 2000 W peak
Impedance: 8 ohms (nominal), 6.0 ohms (min.)
LF Transducer - SMX2151, 15” (381 mm) driver
LF Axial Sensitivity4: 106 dB (1 W/1 m)
LF Max. Calculated SPL: 138 dB
LF Power Handling3: 400 W continuous, 1600 W peak
LF Impedance: 8 ohms (nominal), 6.1 ohms (min.)
HF Transducer - DH7N, 3” (76 mm) diaphragm compression driver
HF Axial Sensitivity4: 112 dB (1 W/1 m)
HF Max. Calculated SPL: 137 dB
HF Power Handling3: 75 W continuous, 300 W peak
HF Impedance: 8 ohms (nominal), 6.0 ohms (min.)
Connectors: Dual four-pin 10 AWG
Enclosure: 13-ply weather-resistant
Environmental: IEC 60529 I P55 for PI and FG versions
Suspension: (28) M10 threaded suspension points
Dimensions
(H x W x D):
1
Half-space measurement.
2
EIA RS-426A, tested for eight hours.
Phoenix/Euro Block
screw-terminals
birch with EVCoat
Grille: 16 GA powder-coated
galvanneal with
rotatable logo
30.26” x 30.26” x 26.77”
(768.6 mm x 768.6 mm x 680.1 mm)
Weight: 145.5 lb (66.1 kg) net, 160.5 lb (72.9 kg) shipping
PI/FG Versions - CDG dual-glandnut input panel cover included
FG Version - 13-ply weather-resis-
TM
tant birch with fiberglass finish
PI/FG Versions -
Stainless steel with
hydrophobic cloth
3
AES 2-1984, tested for eight hours.
4
Arithmetic averages, 300 - 1,300 Hz (LF) and
1,300 - 5,000 Hz (HF).
Page 2
20000
10000
1000
1005020
316
100
10
3.16
70
80
90
100
110
Frequency (Hz)
SPL (dB) 1W/1m
Impedance (Ohms)
Passive Mode, Half Space
Impedance, Passive Mode
2050100
1000
10000
20000
70
80
90
100
110
Frequency (Hz)
SPL (dB) 1W/1m
On Axis 10° Horizontal
20° Horizontal 30° Horizontal
2050100
1000
10000
20000
70
80
90
100
110
Frequency (Hz)
SPL (dB) 1W/1m
On Axis 10° Vertical
20° Vertical 30° Vertical
20
100
1000
10000
20000
360
100
20
3.6
Horizontal
Vertical
Frequency (Hz)
-6dB Beamwidth (degrees)
50
20000
10000
1000
100
20
0
10
20
30
1
10
100
1000
Frequency (Hz)
Directivity Index (DI), dB
Directivity
Factor (Q)
EVH-1152D/66 Loudspeaker System
Frequency Response &
Impedance:
Vertical Off-Axis Frequency
Response:
Horizontal Off-Axis Frequency
Response:
Beamwidth:
Block Diagram (biamp):
Directivity:
Block Diagram (passive):
Page 3
400 Hz
500 Hz
630 Hz
800 Hz
1 k Hz
1.25 kHz
1.6 kHz
2 k Hz
2.5 kHz
3.15 kHz
4 k Hz
5 k Hz
6.3 kHz
8 k Hz
10 kHz
12.5 kHz
16 kHz
20 kHz
Polar Plots (1/3 Octave):
Engineering Data Sheet
Horizontal = Black
Vertical = Grey
Page 4
Dimension Drawings:
Front ViewEnd View Rear ViewSide View
EVH-1152D/66 Part Numbers
PRD000305-001 EVH-1152D/66-BLK, 60° x 60°, black finish•
PRD000305-002 EVH-1152D/66-WHT, 60° x 60°, white finish•
PRD000305-003 EVH-1152D/66-PIB, 60° x 60°, black finish, •
weather resistant
PRD000305-004 EVH-1152D/66-PIW, 60° x 60°, white finish, •
weather resistant
PRD000305-005 EVH-1152D/66-FGB, 60° x 60°, black finish, •
weather resistant fiberglass
PRD000305-006 EVH-1152D/66-FGW, 60° x 60°, white finish, •
weather resistant fiberglass
CAUTION
This EVH loudspeaker should be suspended overhead only
in accordance with the procedures and limitations
specified in the EVF/EVH User Manual and possible
manual update notices. This system should be suspended
with certified rigging hardware by an authorized rigging
professional and in compliance with local, state, and
federal overhead suspension ordinances.
Performance Match
PRD000303 EVH-1152D/43, 40° x 30° coverage•
PRD000304 EVH-1152D/64, 60° x 40° coverage•
PRD000306 EVH-1152D/94, 90° x 40° coverage•
PRD000307 EVH-1152D/96, 90° x 60° coverage•
PRD000308 EVH-1152D/99, 90° x 90° coverage•
PRD000300 EVF-2121S, dual 12” bass element•
PRD000302 EVF-2151D, dual 15” bass element•
CPS2.9 120V CPS2.9, 120V power amplifier, 2 x 900W•
CPS2.12 120V CPS2.12, 120V power amplifier, 2 x 1200W•
D170469 CPS4.5, 120V power amplifier, 4 x 500W •
D170466 CPS4.10, 120V power amplifier, 4 x 1000W•
Electro-Voice
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Bosch Communications Systems 07/2010
Part Number LIT000467066 Rev A
Accessories
ACC000084-000 CDNL4, cover plate, dual NL4•
ACC000085-000 CSG, cover plate, single gland nut•
ACC000086-000 CDG, cover plate, dual gland nut•
ACC000087-000 TK-150, 70V transformer, 150W•
ACC000089-001 HRK-1B, horiz. rigging kit, EVF, black•
ACC000089-002 HRK-1W, horiz. rigging kit, EVF, white•
ACC000090-001 HRK-2B, horiz. rigging kit, EVF-SUB, black•
ACC000090-002 HRK-2W, horiz. rigging kit, EVF-SUB, white•
ACC000091-001 HRK-3B, horiz. rigging kit, EVH, black•
ACC000091-002 HRK-3W, horiz. rigging kit, EVH, white•
ACC000092-001 VRK-1B, vert. rigging kit, EVF, black•
ACC000092-002 VRK-1W, vert. rigging kit, EVF, white•
ACC000093-001 VRK-2B, vert. rigging kit, EVF-SUB, black•
ACC000093-002 VRK-2W, vert. rigging kit, EVF-SUB, white•
ACC000094-001 VRK-3B, vert. rigging kit, EVH, black•
ACC000094-002 VRK-3W, vert. rigging kit, EVH, white•
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other Internatonal locations. For customer orders, Contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
Loading...