Electro-Voice EVF-2151D-BLK Specifications
Key Features:
Dual DVX3159A 15” (381 mm) LF transducers•
101 dB sensitivity, 137 dB maximum SPL•
System rating: 1000 W continuous, 4000 W peak•
(28) M10 threaded suspension points•
PI and FG versions available with gland nut and •
stainless-steel grille
EVF-2151D
Dual 15”
Front-Loaded
Bass Element
General Description:
The Electro-Voice EVF-2151D is a high-power, front-loaded bass element that can be used in a variety of applications where high-quality
sound reinforcement is required in a lightweight package.
The EVF-2151D utilizes two DVX3159A 15” woofers, developed using
FEA optimization for motor, suspension, and electrical design to
ensure very low distortion and maximum intelligibility at high SPL.
The EVF-2151D’s features make it a professional loudspeaker for any
fixed install application. The trapezoidal enclosure is constructed of
weather-resistant birch, and coated with EVCoatTM for protection from
the elements. For maxiumum protection against extreme outdoor
elements, a fully-weatherized fiberglass version is available. The
unique acoustic and rigging design allows for vertical and horizontal
clusters to be built using any combination of loudspeakers from the
entire EVF and EVH series. With an assortment of full-range, low-frequency, and subwoofer loudspeakers available, you have the tools to
maximize flexibility of system design, no matter what the application
or budget. The innovative input panel provides a choice of Phoenixstyle connector (included in all standard models) or the ability to add
a dual NL4-type connector cover plate or gland-nut cover plate (for
weatherizing applications). An externally accessible jumper selects
passive or active operation. An available 70.7/100-V transformer
kit may be easily mounted to the input panel for use in distributed
systems. All these features give you the flexibility to address a large
range of venues, quickly and precisely supporting customer requirements with fewer items in inventory.
Technical Specifications:
Freq. Response1 (-3 dB): 40 Hz - 2.6 kHz
Freq. Range1 (-10 dB): 30 Hz - 3.2 kHz
Rec. High-Pass Frequency: 35 Hz
Axial Sensitivity1: 101 dB (1 W/1 m)
Max. Calculated SPL1: 137 dB
Horizontal Coverage: Omnidirectional
Vertical Coverage: Omnidirectional
Power Handling2: 1000 W continuous, 4000 W peak
LF Transducers: Dual DVX3159A, 15” (381 mm) drivers
Impedance: 4 ohms (nominal), 2.7 ohms (min.)
Connectors: Dual 4-pin 10
Enclosure: 13-ply weather-
Environmental: IEC 60529 IP55 for PI and FG versions
Suspension: (28) M10 threaded suspension points
Dimensions (H x W x D): 30.26” x 26.60” x 28.60”
Net Weight: 117.0 lb (53.1 kg)
1
Half-space measurement.
2
AES-1984, tested for eight hours.
Shipping Weight: 130.5 lb (59.3 kg)
AWG Phoenix/
EuroBlock
screw-terminals
resistant birch
with EVCoat
Grille: 16 GA powder-
coated galvanneal
with rotatable
logo
(768.6 mm x 675.6 mm x 726.4 mm)
PI/FG Versions CDG gland-nut
input panel cover
included
FG Version - 13-ply
weather-resistant
TM
birch with fiberglass finish
PI/FG Versions Stainless steel
with hydrophobic
cloth
20000
10000
1000
1005020
100
10
3.25
1
70
80
90
100
110
Frequency (Hz)
SPL (dB) 1W/1m
Impedance (Ohms)
Frequency Response, Half Space
Impedance
Dimension Drawings:
Front ViewEnd View
Rear ViewSide View
Frequency Response &
Impedance:
CAUTION
This EVF Loudspeaker should be suspended overhead
only in accordance with the procedures and limitations
specified in the EVF/EVH User Manual and possible
manual update notices. This system should be suspended
with certified rigging hardware by an authorized rigging
professional and in compliance with local, state,
and federal overhead suspension ordinances.
EVF-2151D Part Numbers
Performance Match
PRD000288 EVF-1122D/64, 60° x 40° coverage•
PRD000289 EVF-1122D/66, 60° x 60° coverage•
PRD000290 EVF-1122D/94, 90° x 40° coverage•
PRD000291 EVF-1122D/96, 90° x 60° coverage•
PRD000292 EVF-1122D/99, 90° x 90° coverage•
PRD000293 EVF-1122D/126, 120° x 60° coverage•
PRD000294 EVF-1152D/43, 40° x 30° coverage•
PRD000295 EVF-1152D/64, 60° x 40° coverage•
PRD000296 EVF-1152D/66, 60° x 60° coverage•
PRD000297 EVF-1152D/94, 90° x 40° coverage•
PRD000298 EVF-1152D/96, 90° x 60° coverage•
PRD000299 EVF-1152D/99, 90° x 90° coverage•
PRD000300 EVF-2121S, dual 12” bass element•
PRD000303 EVH-1152D/43, coaxial 40° x 30° coverage•
PRD000304 EVH-1152D/64, coaxial 60° x 40° coverage•
PRD000305 EVH-1152D/66, coaxial 60° x 60° coverage•
PRD000306 EVH-1152D/94, coaxial 90° x 40° coverage•
PRD000307 EVH-1152D/96, coaxial 90° x 60° coverage•
PRD000308 EVH-1152D/99, coaxial 90° x 90° coverage•
CPS2.9 120V CPS2.9, 120V power amplifier, 2 x 900W•
CPS2.12 120V CPS2.12, 120V power amplifier, 2 x 1200W•
D170469 CPS4.5, 120V power amplifier, 4 x 500W •
D170466 CPS4.10, 120V power amplifier, 4 x 1000W•
PRD000302-001 EVF-2151D-BLK, black finish•
PRD000302-002 EVF-2151D-WHT, white finish•
PRD000302-003 EVF-2151D-PIB, black, weather resistant•
PRD000302-004 EVF-2151D-PIW, white, weather resistant•
PRD000302-005 EVF-2151D-FGB, black, weather resistant •
fiberglass
PRD000302-006 EVF-2151D-FGW, white, weather resistant •
fiberglass
Accessories
ACC000084-000 CDNL4, cover plate, dual NL4•
ACC000085-000 CSG, cover plate, single gland nut•
ACC000086-000 CDG, cover plate, dual gland nut•
ACC000087-000 TK-150, 70V transformer, 150W•
ACC000089-001 HRK-1B, horiz. rigging kit, EVF, black•
ACC000089-002 HRK-1W, horiz. rigging kit, EVF, white•
ACC000090-001 HRK-2B, horiz. rigging kit, EVF-SUB, black•
ACC000090-002 HRK-2W, horiz. rigging kit, EVF-SUB, white•
ACC000092-001 VRK-1B, vert. rigging kit, EVF, black•
ACC000092-002 VRK-1W, vert. rigging kit, EVF, white•
ACC000093-001 VRK-2B, vert. rigging kit, EVF-SUB, black•
ACC000093-002 VRK-2W, vert. rigging kit, EVF-SUB, white•
Electro-Voice
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Bosch Communications Systems 07/2010
Part Number LIT000466000 Rev A
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other Internatonal locations. For customer orders, Contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 86 6/78AUDIO
Specifications subject to change without notice.
Loading...