Electro-Voice EVF-1122S-99-FG User Manual

Page 1
EVF-1122S/99-FG
Single 12” Two-Way
90° x 90° Full-Range
Fully-Weatherized
Loudspeaker System
Key Features:
Fully Weatherized Fiberglass Finish with Gland • Nut and Stainless Steel Grille
ND2B 2” (51mm) Diaphragm, 1.4” (36mm) Exit • Pure Titanium Compression Driver
SMX2121 12” (305mm) LF Transducer with Fully • Symmetric Drive
Advanced 4• Protection
Coverage Pattern: 90° x 90° Constant • DirectivityTM 12” Rotatable Waveguide
98 dB Sensitivity, 131 dB Maximum SPL• System Rating: 500W Continuous, (2000W Peak)• Active Rating: LF400W/HF40W Continuous
(1600W/160W Peak) (22) M10 Threaded Suspension Points
General Description: Technical Specifications:
The Electro-Voice® EVF-1122S/99-FG is a fully-weatherized, fiber­glass-coated, high power, 2-way loudspeaker system that can be used in a variety of applications where high quality sound reinforce­ment is required in a compact, lightweight package.
The EVF-1122S/99-FG utilizes the ND2B, a high output 2” titanium compression driver, coupled to a Constant Directivity™ 90° x 90° waveguide. The SMX2121 12” woofer used FEA optimization for motor, suspension, and electrical design for very low distortion, high efficiency, and maximum intelligibility at high SPL levels. The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, linear off-axis response, and a protection circuit for long term reliability.
The EVF-1122S/99-FG features make it ideal for many fixed install applications, including applications with full exposure to outdoor elements. The trapezoidal enclosure is constructed out of weather resistant birch, and coated with fiberglass for maximum protection from extreme outdoor elements. The unique acoustic and rigging design allows for vertical and horizontal clusters to be built using any combination of loudspeakers from the entire EVF & EVH Series, with 7 horn patterns to choose from and an assortment of Low Fre­quency and subwoofer loudspeakers, it gives you the tools to maxi­mize flexibility of system design, no matter what the application and budget. The innovative input panel provides phoenix style connec­tors (included in all standard models) and gland nut cover plate (for weatherizing applications). An externally accessible jumper selects passive or active operation. An available 70.7/100 Volt transformer kit simply mounts to the input panel for use in distributed systems. All these features give you the flexibility to do a large range of venues in extreme environments with fewer items in inventory and quickly support your customer’s requirements.
th
Order Crossover Network with HF
Freq. Response1 (-3 dB): 118 Hz - 16 kHz
Freq. Range1 (-10 dB): 58 Hz - 19 kHz
Rec. Hipass Frequency: 65 Hz
Axial Sensitivity: 98 dB (1W/1m) Max. Calculated SPL: 131 dB Horizontal Coverage: 90°
Vertical Coverage: 90°
Power Handling: 500W Continuous, 2000W Peak
LF Transducer: SMX2121, 12 in (305mm) Driver
HF Transducer: ND2B, 2 in (51mm) Diaphragm
Crossover Frequency: 1450 Hz
Nominal Impedance: 8 Ohms
Minimum Impedance: 6.0 Ohms
Connectors: (2) 4 Contact 10 AWG Phoenix/
Enclosure Material: 13 Ply Weather Resistant Birch,
Suspension: (22) M10 Threaded Points
Dimensions (H x W x D): 30.26” x 16.00” x 16.27”
Net Weight: 63.1 lb (28.6 kg)
Shipping Weight: 73.4 lb (33.3 kg)
1
Half Space Measurement.
Compression Driver
EuroBlock Style Screw Terminal, Gland Nut with Input Panel Cover Included for Weatherizing
Fiberglass Finish
Grille: 18 GA Stainless Steel with Hydropho-
bic Cloth and Rotatable Logo
(768.6mm x 406.3mm x 413.3mm)
Page 2
20000
10000
1000
1005020
316
100
10
3.16
70
80
90
100
110
Frequency (Hz)
Sensitivity (dB)
Impedance (Ohms)
Passive Mode, Half Space Impedance
2050100
1000
10000
20000
70
80
90
100
110
Frequency (Hz)
Sensitivity (dB)
On Axis 10° Horizontal 20° Horizontal 30° Horizontal 40° Horizontal 50° Horizontal
2050100
1000
10000
20000
70
80
90
100
110
Frequency (Hz)
Sensitivity (dB)
On Axis 10° Vertical Up 20° Vertical Up 30° Vertical Up 40° Vertical Up 50° Vertical Up
20000
10000
1000
1005020
70
80
90
100
110
Frequency (Hz)
Sensitivity (dB)
On Axis 10° Vertical Down 20° Vertical Down 30° Vertical Down 40° Vertical Down 50° Vertical Down
20000
10000
1000
100
20
0
10
20
30
1
10
100
1000
Frequency (Hz)
Directivity Index (DI), dB Directivity
Factor (Q)
20
100
1000
10000
20000
360
100
20
3.6
Horizontal Vertical
Frequency (Hz)
-6dB Beamwidth (degrees)
50
EVF-1122S/99-FG Loudspeaker System
Frequency Response & Impedance:
Vertical Off Axis Frequency Response (Up):
Horizontal Off Axis Frequency Response:
Vertical Off Axis Frequency Response (Down):
Beamwidth:
Block Diagram (Biamp):
Directivity:
Block Diagram (Passive):
Page 3
Polar Plots (1/3 Octave):
400 Hz
500 Hz
630 Hz
800 Hz
1 KHz
1.25 KHz
1. 6 KHz
2 KHz
2. 5 KHz
3.15 KHz
4 KHz
5 KHz
6. 3 KHz
8 KHz
10 KHz
12.5 KHz
16 KHz
20 KHz
Engineering Data Sheet
Horizontal = Black
Vertical = Grey
Page 4
Dimension Drawings:
Front ViewEnd View
EVF-1122S/99 Part Numbers
PRD000203-001 EVF-1122S/99-BLK, 90° x 90°, Black Finish• PRD000203-002 EVF-1122S/99-WHT, 90° x 90°, White Finish• PRD000203-003 EVF-1122S/99-PIB, 90° x 90°, Black Finish, Weather Resistant PRD000203-004 EVF-1122S/99-PIW, 90° x 90°, White Finish, Weather Resistant PRD000203-005 EVF-1122S/99-FGB, 90° x 90°, Black Finish, Weather Resistant Fiberglass PRD000203-006 EVF-1122S/99-FGW, 90° x 90°, White Finish, Weather Resistant Fiberglass
Performance Match
PRD000199 EVF-1122S/64, 60° x 40° Coverage• PRD000200 EVF-1122S/66, 60° x 60° Coverage• PRD000201 EVF-1122S/94, 90° x 40° Coverage• PRD000202 EVF-1122S/96, 90° x 60° Coverage• PRD000204 EVF-1122S/126, 120° x 60° Coverage• PRD000205 EVF-1152S/43, 40° x 30° Coverage• PRD000206 EVF-1152S/64, 60° x 40° Coverage• PRD000207 EVF-1152S/66, 60° x 60° Coverage• PRD000208 EVF-1152S/94, 90° x 40° Coverage• PRD000209 EVF-1152S/96, 90° x 60° Coverage• PRD000210 EVF-1152S/99, 90° x 90° Coverage• PRD000211 EVF-1121S, 12” Bass Element• PRD000212 EVF-1151S, 15” Bass Element• PRD000213 EVF-1181S, 18” Bass Element• F.01U.076.843 CPS2.9, 120V Power Amplifier, 2 x 900W• F.01U.076.844 CPS2.12, 120V Power Amplifier, 2 x 1200W• D170469 CPS4.5, 120V Power Amplifier, 4 x 500W • D170466 CPS4.10, 120V Power Amplifier, 4 x 1000W
Rear ViewSide View
CAUTION
This EVF Loudspeaker should be suspended overhead only in accordance with the procedures and limitations
specified in the EVF/EVH Users Manual and possible
manual update notices. This system should be suspended
with certified rigging hardware by an authorized rigging
professional and in compliance with local, state, and fed-
eral overhead suspension ordinances.
Accessories
ACC000084-000 CDNL4, Cover Plate, Dual NL4• ACC000085-000 CSG, Cover Plate, Single Gland Nut• ACC000086-000 CDG, Cover Plate, Dual Gland Nut• ACC000087-000 TK-150, 70V Transformer, 150W• ACC000089-001 HRK-1B, Horiz. Rigging Kit, EVF, Black• ACC000089-002 HRK-1W, Horiz. Rigging Kit, EVF, White• ACC000090-001 HRK-2B, Horiz. Rigging Kit, EVF-SUB, Black• ACC000090-002 HRK-2W, Horiz. Rigging Kit, EVF-SUB, White• ACC000091-001 HRK-3B, Horiz. Rigging Kit, EVH, Black• ACC000091-002 HRK-3W, Horiz. Rigging Kit, EVH, White• ACC000092-001 VRK-1B, Vert. Rigging Kit, EVF, Black• ACC000092-002 VRK-1W, Vert. Rigging Kit, EVF, White• ACC000093-001 VRK-2B, Vert. Rigging Kit, EVF-SUB, Black• ACC000093-002 VRK-2W, Vert. Rigging Kit, EVF-SUB, White• ACC000094-001 VRK-3B, Vert. Rigging Kit, EVH, Black• ACC000094-002 VRK-3W, Vert. Rigging Kit, EVH, White
Electro-Voice
12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043
®
www.electrovoice.com
© Bosch Communications Systems 09/2009
Part Number LIT000341599 Rev A
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other Internatonal locations. For customer orders, Contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
Loading...