Safety
Correct rain cover usage
– Use the speaker in upright (shown left) or kickback
(shown right) orientations only.
– Do not use the speaker in monitor mode in damp or
wet conditions.
– Route the cables out of the bottom of the amp
pocket. Make sure that the zippers are tight around
the cables.
– Do not route the cables out of the sides of the amp
pocket. Do not leave the amp pocket unzipped.
– Do not submerge the speaker in water or spray with
a water hose.
Cleaning and drying instructions
– Clean with a damp cloth.
– Air-dry only.
– Do not machine wash.
– Do not tumble dry.
Drain holes
The EVERSE rain cover was designed with four drain
holes. The goal is to drain any water that may penetrate
the inside of the rain cover.
IP rating
The EVERSE loudspeaker with the rain cover installed is
rated for IP44, but only in upright and kickback orientations, and only when used properly as defined in the included Quick user guide.
Some water may pool at the bottom of the rain cover
when exposed for an extended period of time. Remove
the speaker from the bag to allow both to dry properly.
When using the rain cover, the weatherized input cover
is optional to achieve the IP44 rating.
Weatherization
When the rain cover is installed, the EVERSE loudspeaker is designed to be weather resistant to IP44
standards, but not waterproof. The weather resistance
may be reduced by damage, repair, improper disassembly, and regular wear and tear. Always inspect the
EVERSE loudspeaker and accessories before and after
every use. Allow the loudspeaker and components to dry
before storage or between uses.
The EVERSE loudspeaker with rain cover installed is intended only for temporary use in wet or damp environments. The loudspeaker is not intended to be exposed
continuously to moisture over long periods of time. Do
not expose to salt water or spray, do not expose to
chlorine or use in high chlorine environments.
Using the rain cover
To use the rain cover:
1. Unzip the rain cover and insert the speaker.
Make sure the grill is facing the front flap.
2. Zip the rain cover.
3. Unzip the handle pocket and use the pocket to grab
the handle.
The pocket goes under the handle.
4. Lift the front flap and fold it back over the top of the
speaker.
5. Attach the flap using the hook and loop at the back
of the top of the speaker
To use the speaker in tripod position:
1. Open the bottom flap of the rain cover.
To connect the speaker:
1. Unzip the amp pocket in the back of the rain cover.
2. Make the required connections.
3. Zip the amp pocket.
Technical data
EVERSE8-RAINCVR Rain
resistant cover for EVERSE
8
Color Black
Material 600D poly with waterproof
IP rating IP44
Dimensions (H x W x D)
(mm)
Dimensions (H x W x D)
(in)
Shipping dimensions (H x
W x D) (mm)
Shipping dimensions (H x
W x D) (in)
Weight (g) 370 g
Weight (lb) 0.82 lb
Shipping weight (g) 420 g
Shipping weight (lb) 0.93 lb
and hydrophobic treated lycra cloth
400 mm x 285 mm x 280
mm
15.75 in x 11.22 in x 11.02
in
480mm x 425mm x
28.5mm
18.9in x 16.7in x 1.12in
EVERSE Rain cover
EVERSE8‑RAINCVR, EVERSE12‑RAINCVR
Quick user guide
2. Insert the speaker on a tripod.
EVERSE12-RAINCVR Rain
resistant cover for EVERSE
12
Color Black
Material 600D poly with waterproof
IP rating IP44
Dimensions (H x W x D)
(mm)
Dimensions (H x W x D)
(in)
Shipping dimensions (H x
W x D) (mm)
Shipping dimensions (H x
W x D) (in)
Weight (g) 620 g
Weight (lb) 1.37 lb
Shipping weight (g) 680 g
Shipping weight (lb) 1.50 lb
and hydrophobic treated lycra cloth
584 mm x 362 mm x 378
mm
23 in x 14.25 in x 14.88 in
23 mm x 570 mm x 590 mm
0.90 in x 22.4 in x 23.23 in
Bosch Security Systems, LLC
130 Perinton Parkway
Fairport, NY 14450
USA
www.electrovoice.com
© Bosch Security Systems, LLC, 2023
EU importer:
Bosch Sicherheitssysteme GmbH
Robert-Bosch-Platz 1
70839 Gerlingen
Germany
© Bosch Sicherheitssysteme GmbH,
2023
2023-11 | 02 | F.01U.415.385 | 202311031428
Loading...