EP405-8T
EP405-16T
Ceiling Loudspeaker
Systems
COMMERCIAL
®
EP405 series loudspeaker systems are
(1 W, 500 Hz- 3,000 Hz, ref. 20 mPa, see Note 1)
(see Figure 1, Note 2)
(105 Hz - 15 kHz, AES method, see Note 3)
(16 watts input, 1 m, ref. 20 µPa, see Note 4)
Nominal: ............................................................................ 8.0 ohms
Minimum at 650 Hz: ..........................................................7.0 ohms
4-inch, high-efficiency, low-frequency driver with a full-range curvilinear
cone
Eight-way barrier strip with screw, or push type, connectors that will
accept up to two #10 AWG wires
Loudspeaker diameter: ........................................... 203 mm (8.0 in.)
Depth: .................................................................... 184 mm (7.25 in.)
Net Weight:
EP405-8T: ................................................................... 2.3 kg (5.0 lb)
EP405-16T: ................................................................. 2.7 kg (6.0 lb)
Shipping Weight:
EP405-8T: ................................................................... 2.5 kg (5.5 lb)
EP405-16T: ................................................................. 3.0 kg (6.5 lb)
Finish: ............................................ White powder-coated enamel
Connection Type:
Eight-way barrier strip that will accept (2) #10 gauge wires
Transformer Specifications
Frequency Response: .......................... 65 Hz to 15 kHz, ±3 dB
Insertion Loss: ................................................................ <1.0 dB
Secondary Impedance: ................................................... 8 ohms
Primary Impedances and Power Drawn:
These components have been designed to work together as a
complete system in a wide range of different ceiling constructions.
They provide wide dispersion, high-efficiency, high-maximum
output, ease of installation, and wide range reproduction of music
or voice.