Electro-voice ELIMINATOR KW DATASHEET
Key Features:
• Two powerful EV DL18 woofers have 1000
watt continuous, 4000 watt peak power
handling and 101 dB sensitivity to deliver
131 dB continuous, 137 dB peak output
• Large, slotted vents in the middle of the
enclosure move more air with less vent
compression for greater low-bass output
• Sealed tilt-back pocket wheels and rear
mounted handles allow easy one-person
portability
• Integral 1-3/8 inch metal stand mount and 18
inch pole included for elevating full-range
speakers above the sub
TM
• Strong Roadwood
braced and covered in black industrial-grade
carpeting
• Made in the U.S.A.
enclosure is heavily
Eliminator kW
Dual 18-inch
Subwoofer
Speaker System
General Description:
The Eliminator kW dual 18-inch subwoofer is designed to add
high-output, high-impact deep bass response to any sound
system. The Eliminator kW uses EV DL18 woofers that
provide high excursion capability and resistance to overload
for increased reliability and long life. Although it is part of the
Eliminator i family, the Eliminator kW may be used to augment
the performance of any EV speaker system. The Eliminator
kW can move tremendous amounts of air at low frequencies
thanks to its combination of innovative enclosure design and
powerful EV drivers. In the center of the enclosure are large
slotted vents optimized for maximum low frequency efficiency.
The vents are tuned to 38 Hz to deliver more low bass than
most professional woofer systems. The enclosure is built of
Roadwood
unaffected by temperature and humidity. Roadwood
the weight and twice the strength of particleboard. The
Eliminator kW is easily moved by only one person thanks to its
rear-mounted pocket wheels and comfort-lift handles.
The enclosure is covered in black industrial-strength carpeting
that holds up well under the demands of portable audio. It
comes complete with a metal stand mount and 18-inch steel
pole for elevating another system. A heavy 18-gauge steel
grille protects the woofers. Paralleled Neutrik Speakon input
connectors are used exclusively for reliable, loss-free signal
transfer.
TM
, a composite material that is void-free and
TM
is half
Technical Specifications:
1
1
Half Space measurement.
esnopseR.qerF
1
egnaR.qerF
1
LPSdetaluclaCxaM
ytivitisneS: m1/W1,Bd101
ssaP-iHdednemmoceR
:)Bd3-(zH003-zH04
:)Bd01-(zHk8.2-zH33
:)kaeP(Bd731
:egarevoClatnoziroHlanoitceridinmO
:egarevoClacitreVlanoitceridinmO
:gnildnaHrewoPkaePW0004,suounitnoCW0001
:srecudsnarTsrevirD)mm754("81tm81LD)2(
:qerFgninuTerusolcnEzH83
:ycneuqerF
revossorCdednemmoceR
:ycneuqerF
:srotcennoCs'4LNkirtueNlauD
:lairetaMerusolcnEdoowdaoR
:ellirGleetsAG61
:)DxWxH(miD"5.32x"4.22x"9.44
:)hcae(thgieWteN)gk8.56(sbl541
:thgieWgnippihS)gk4.96(sbl351
.nimtco/Bd21,zH53
yllieR-ztiwkniLzH061
)mm795x965x0411(
General Description (cont’): Frequency Response:
The Eliminator kW can be safely used with power amplifiers
capable of delivering up to 2000 watts into a 4-ohm load, but
is efficient enough to deliver outstanding performance with as
little as 400 watts. Recommended crossover frequency
range is from 80-160 Hz withminimum crossover slopes of
12-dB-per-octave. Like all other vented systems, it is
sensible to protect the Eliminator kW and maximize its
available output by inserting an active 35 Hz subsonic filter
with a minimun slope of 12-dB-per-octave into the signal
chain.
Dimension Drawings:
Block Diagram:
12000 Portland Avenue South, Burnsville, MN 55337
Phone:952/884-4051, Fax:952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 7/2002
Part Number 38109-993 Rev A
Performance Match:
• Eliminator i - 15-inch two-way
• Eliminator i Double - Dual 15-inch two-way
• AC-One loudspeaker controller
• Dx38 digital sound system controller
• Q66 stereo power amplifier
• P2000 stereo power amplifier
Eliminator kW Part Number:
• Eliminator kW - 301161-000
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
Loading...