Electro-Voice DSP-1 EDS User Manual
Key Features:
s
• 300 MIPS computing capacity – doubles the
DSP power of a NetMax System Controller.
• 2 RAM banks (512k x 24 Bit) – allow for
additional delay lines up to 21.8 seconds.
• 48 Bit signal processing – Double Precision
DSP algorithms.
• Automatic Configuration – signals whether
a new module has been inserted or an
installed one has been removed.
DSP-1
Signal Processor
Expansion Module
General Description: Technical Specifications:
The DSP-1 is a DSP Extension Module for the
NetMax System Controller. The module provides
additional DSPs for extending the signal processing
capacity and RAM banks for the realization of longer
delay times or additional delay lines.
snoisnemiD)DxHxW(mm5.28xmm02xmm011
tnerruC/egatloVylppuSAm002/V3.0±,CDV3.3+
etaRelpmaSzHk84
tamroFataDgnissecorptiB84
rewoPgnissecorPSPIM003
yromeM
yaled.xam
yaleDlangiSsm521.0
egnaRerutarepmeTgnitarepOC°04…C°0
thgieW)bl01.0(g54
Am002/V81.0±,CDV8.1+
8.12/MARStiB42xk215x2
"52.3x"97.0x"33.4
Block Diagram:
Installation:
POWER
SUPPLY
AUDIO IN
+3.3V
+1.8V
4 x 8 Channels
MODULE INTERFACE
HOST/
SERIAL
AUDIO OUT
4 x 8 Channels
Dimension Drawings:
SRAM SRAM
DSPDSP
1. Turn off power of the unit and pull mains plug
2. Remove cover plate (6 screws on the sides, 3 screws
on top, 4 screws on the rear)
3. Install the DSP-1 module (see diagram). Place the
module in the guiding on the bottom plate (A), connect
the plug to the appropriate socket (B) and insert the
plastic spacers into the mounting holes (C)
4. Reinstall the cover plate
5. Plug in the mains cord and turn the unit’s power on.
6. The N8000 automatically recognizes the DSP-1
module. No further configuration required
Front View
12000 Portland Avenue South, Burnsville, MN 55337
Phone:952/884-4051, Fax:952/884-0043
www.electro voice.com
© Telex Communications, Inc. 1/2006
Part Number LIT -0000XX Rev 1
Side ViewTop View
All Dimensions
in Millimeters
DSP-1 Part Number:
DSP-1 -- D170328
U.S.A. and Canada only. For customer orders, contact Customer Service at:
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
Other International locations. For customer orders, contact Customer Service at:
For warranty repair or service information, contact the Service Repair department at:
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
800/392-3497 Fax: 800/955-6831
+ 49 9421-706 0 Fax: + 49 9421-706 265
+ 1 952 884-4051 Fax: + 1 952 736-4212
800/685-2606
Loading...