Electro-Voice COMMERCIAL SOUND SYSTEMS User Manual

Step Up To Electro-Voice

®

COMMERCIAL SOUND SYSTEMS

From schools and restaurants to shopping malls and the workplace —

clear, intelligible sound is becoming an increasingly important part

of everyday life, and in places where it previously was given little,

or no, consideration at all. Distributed sound systems

are now being viewed as a priority, not an afterthought.

At Electro-Voice, we’ve recognized the expanded role of today’s

sound contractor, as well as the extra responsibilities associated

with that new role. Specifying and installing a system is complex

enough; deciding on the right products should be the easy part.

That’s why EV has taken much of the guesswork and “fear factor”

out of specifying a commercial sound installation. In the past, contractors

have faced the daunting task of matching different components that

would deliver the best end result, from input to output.That’s changed,

now, through EV’s “total design” approach. By offering a complete line

of components that are specified and matched for optimal performance, EV

customers and dealers can now easily assemble complete, end-to-end systems

that deliver proven results in any commercial sound application.

Now we are combining three proven brands of product to help the systems

contractor solve countless system design challenges. Our Dynacord, EV and

University commercial sound products each bring a history of reliability,

performance and value to any installation. No other manufacturer offers

design innovation at every point in the system from the source to the speaker.

This is the essence of EV’s “total design” concept and it is the perfect way to

ensure that a message gets across quickly, clearly and under budget. But for

a product line to be truly effective, it can never stop evolving. End-user needs

don’t stop changing, so why should a product’s development?

EV is continually upgrading, testing, reevaluating and refining its products,

to ensure that that they pass the most important test – meeting the needs of

their users. It’s a constant work-in-progress, combining factory expertise with

customer feedback.The end result is a commercial sound product line that

represents a complete solution, offering everything from the industry’s most

flexible digital matrix paging systems to the renowned EVID™series of

premium surface and ceiling mount speaker systems.These products make up

the total system philosophy from initial specification to final installation.

COMMERCIAL SOUND

SYSTEM SOLUTIONS

FROM

ELECTRO-VOICE

®

CONTENTS

Product Index Located Inside Back Cover

Product Index Located Inside Back Cover

Paging Mics Ceiling Speakers EVID

™

Systems System ExamplesProAnnounce

™

Horns and Drivers Surface Mount SpeakersAmplifiers

System Examples........ 2-3

EVID

™

Systems........ 4-5

EVID

™

Ceiling Speakers .......... 6

Surface Mount Speakers .......... 7

Ceiling Speakers ........ 8-9

Ceiling Mounting.......... 10

Horns.......... 11

Paging Horns .... 12-13

Compression Drivers .... 14-15

Mixer/Amplifiers.......... 16

Power Amplifiers ........ 17

Paging Mics.... 18-19

Paging System Examples ..........20

ProAnnounce

™

System Units ..........21

ProAnnounce

™

Expansion Units ..........22

ProAnnounce™Amplifiers ..........23

Index ....24-25

CALL EV TODAY! 1-800-685-6386

EVID C4.2

CEILING SPEAKERS

STOCKROOM

CASHIER

WOMENS CLOTHING

TEEN CLOTHING

EVID C8.2

CEILING

SPEAKERS

EVID C10.1

SUBWOOFERS

THE “TOTAL SYSTEM SOLUTION”

EVID C10.1

SUBWOOFERS

EVID 4.2

T

S

PEAKERS

RESTAURANT

SPORTS BAR

OFFICE

BAR/CASHIER

The EV/Dynacord advantage in distributed

systems is in our “total system” approach.

Each product is designed with the

system in mind. As these examples

illustrate, EV, University and Dynacord

products can offer a complete

distributed sound solution from the

paging microphone to the ceiling

speaker. Each component is

designed to work together resulting

in easy-to-create system designs

and trouble free operation. The

key to our system approach is

the variety of options available

in every product category. From

ceiling speakers and paging

horns to power amplifiers

and matrix routers, there are

multiple models which enable

the system designer to solve

virtually any installation challenge.

SYSTEM EXAMPLES

CDP848AT

PAGING PROJECTORS

TAPPED AT 15 WATTS EACH MAX.
SPL 117dB

AT 1 METER

75 WATTS

REQUIRED FOR EACH

SEATING AREA

.

SEATING

AREA

SEATING AREA

OFFICE

PA430T

PAGING PROJECTORS

TAPPED AT

15 WATTS EACH

119dB SPL @ 1

METER

PA430T

PAGING

P

ROJECTORS

T

APPED AT

7.5 WATTS EACH
116dB SPL

@ 1

METER

SUPPORT
COLUMNS

Paging Mics Ceiling Speakers EVID

™

Systems System ExamplesProAnnounce

™

Horns and Drivers Surface Mount SpeakersAmplifiers

60° H

4

Comprised of dual 6-inch LF drivers and a 1-inch Ti/waveguide, the EVID 6.2 is perfect

for applications that require exemplary audio and the capability to fill large areas with sound.

Additionally, the flexible Strong-Arm-Mount

™

(SAM™) system provides the versatility to

accommodate any installation challenge. EV’s unique 6-inch dual woofer design delivers crisp and

clean program for the utmost in listening experience regardless of the location. Great for larger areas

that demand higher SPL levels, the 6.2 delivers the outstanding, full bass output required for shopping

malls, stadiums, airports, etc.

Identical to the EVID 6.2 but features a line transformer that offers selectable taps at 7.5 W,

15 W, 30 W and 60 W, allowing for easy connection to 70-volt or 100-volt speaker lines in distributed systems.

EVID 6.2t

Loaded with dual 3.5-inch LF drivers and a 3/4-inch Ti direct radiator, the EVID 3.2 produces

sound that defies its small size. Its unobtrusive profile is ideal for background music and paging

support in a wide variety of environments (e.g., offices, retail stores, restaurants, etc.) Coupled

with the 12.1 Subwoofer, two to four EVID 3.2 speakers deliver amazing SPL levels for

foreground music.

Identical to the EVID 3.2 but features a line transformer that offers a tap at

5 W (10 W for 100-volt systems), allowing for easy connection to 70-volt or 100-volt speaker

lines in distributed systems.

EVID 3.2t

The EVID™concept means innovation. Let’s face it, EVID is not just another speaker.

From the unique, superior design to its innovative acoustical integrity, EVID delivers

value, performance and ease-of-use to the contractor and end listener alike. In designing

EVID, we evaluated all the current products available and asked contractors and typical end

users,“What do you want?” End users wanted something attractive and superior sounding

amidst a world of plain black boxes. Contractors wanted a comprehensive line that would

provide flexible choices for easier system design and installations.We took your answers back

to the speaker lab. And we listened.With EVID, we have achieved these goals.The result is a

comprehensive background/foreground speaker line with the key characteristics installers need

and users want.

EVID™S

YSTEMS

Specifications 6.2/6.2t 4.2/4.2t 3.2/3.2t

Frequency Response
(-10 dB) 62 Hz-20 kHz 65 Hz-20 kHz 85 Hz-20 kHz

Power Handling 300 watts 200 watts 150 watts

Sensitivity 1 W @ 1 m 94 dB 89 dB 87 dB

Impedance 8 ohms 8 ohms 8 ohms

Max SPL 118 dB 113 dB 108 dB

Horz. Coverage 100° 120° 140°

Vertical Coverage 80° 80° 100°
LF Transducer 2 x 6” 2 x 4” 2 x 3.5”

(150 mm) (100 mm) (90 mm)

HF Transducer 1” (25 mm) 1” (25 mm) .75” (20 mm)

Protection Full System Full System Full System

Specifications
(Cont.) 6.2/6.2t 4.2/4.2t 3.2/3.2t

Suspension Multi-Axis Multi-Axis Multi-Axis
Swing X Rotation 100° x 90° 100° x 90° 100° x 90°

Terminals Spring Spring Spring

Enclosure Material ABS (paintable) ABS (paintable) ABS (paintable)

“t” Version 70 V: 7.5 W 70 V: 3.75 W 5 W 70 V/10
Wattage Taps 70 V/100 V: 15 W, 70 V/100 V: 7.5 W, W 100 V

30 W, 60 W 15 W, 30 W

Dimensions 16.5” x 9” x 11.75” 12.2” x 6.9” x 8.5” 9.2” x 5.1” x 6.5”
(H x W x D) 419 x 228 x 298 mm 310 x 175 x 216 mm 234 x 127 x 165 mm

Net Weight 12 lb. (5.3 kg) 8.5 lb. (3.9 kg) 3.3 lb. (1.5 kg)

EVID 6.2 Extended Range — High output speaker system

Perfect for a variety of environments where full-range audio is needed but space is limited: restaurants,
bars, bistros, department stores, and outdoor venues. Offering the bass response of a much larger speaker,
dual 4-inch woofers make the 4.2 a phenomenal performer.The 1-inch waveguide coupled titanium
tweeter delivers controlled clean mids and highs. Combine it with the 12.1 Subwoofer for an amazing
listening experience. Full system protection and EV’s unique Strong-Arm-Mount

™

(SAM™) make the

EVID 4.2 a solid choice in any environment.

Identical to the EVID 4.2 but features a line transformer that offers selectable

taps at 3.75 W, 7.5 W, 15 W and 30 W, allowing for easy connection to 70-volt or 100-volt speaker

lines in distributed systems.

EVID 4.2t

EVID 4.2 Compact — Full-range multi-use speaker system

EVID 3.2 Very compact — Full-range speaker system

EVID

™

Systems Horns and Drivers Paging Mics ProAnnounce

™

System Examples Ceiling Speakers AmplifiersSurface Mount Speakers

To order or for more information

call 1-800-685-6386

5

To augment and extend the low frequency response of any full-range models, an attractive
and powerful subwoofer completes the EVID line.The 12.1 provides an easy installation by
incorporating dual voice coils to handle both channels of a stereo pair. In addition, the unit
can power up to four satellites with its four crossed-over audio outputs on the back panel.

Same as EVID 12.1 above but with integrated 300 watt single channel amplifier.
Features adjustable 12dB/octave crossover, full range and high pass line level XLR pass thru
outputs, and all mounting hardware.

12.1P

Tabletop Stands

EVID™S

YSTEMS

Dual input subwoofer EVID 12.1

The AB-34 and 64 series kits feature a 4 sided powder coated steel
mounting assembly allowing for 4 EVID speakers to be mounted in an array to cover
a 360 degree pattern. The mount offers additional flexibility in your EVID system
designs.The AB-34 works with the EVID 3.2 series and can be used with a threaded
rod for suspension from the ceiling.The AB-64 is used with the EVID 4.2 or

6.2 series speakers and can be used with a speaker stand tripod or hung from the
ceiling using a threaded rod as shown. All necessary accessories and parts needed for
use are included.

The AB-32 and AB-62 series kits feature a 2 sided powder coated steel
mounting assembly allowing for 2 EVID speakers to be mounted in an array to cover a 180
degree pattern. The AB-32 works with the EVID 3.2 series and can be used with a threaded
rod for suspension from the ceiling.The speakers can then be positioned on the bracket to
cover a variety of patterns to best serve the installation requirements.The AB-62 allows the
EVID 4.2 or 6.2 series speakers to be used with a speaker stand tripod or hung from the
ceiling utilizing a threaded rod as shown. All necessary accessories and parts needed for use
are included.

AB-32/AB-62

AB-34/AB-64

The HS-3 horizontal tabletop stand allows the EVID 3.2 or 4.2 to sit on a table,
meter bridge, desk, bookshelf or other flat surface. Ideal for portable applications, the stands are
made of steel for strength and durability and include rubber feet to protect surfaces.
Sold in pairs.

The VS Series vertical tabletop stands are available for any EVID full range model.
The stands allow the EVID speakers to be easily used on a table, desk, bookshelf or other flat
surface in a vertical configuration. Ideal for portable applications, the stands are made of plastic
coated steel for strength and durability. Sold in pairs.

VS Series

HS-3

Terminal Covers

The TC-4 and TC-6 terminal covers protect the input connections on the EVID
speakers from the long-term effects of moisture.The covers are available for the EVID 4.2 and 6.2
series models. The covers easily attach to the rear input panel of the speaker and include a
weatherproof cable connector.

TC Series

Paging Mics Ceiling Speakers EVID

™

Systems System ExamplesProAnnounce

™

Horns and Drivers Surface Mount SpeakersAmplifiers

Mounting Brackets

Specifications 12.1/12.1P

Frequency Response

40 Hz-140 Hz

(-10 dB)

Power Handling 175/175 watts

Sensitivity 1 W @ 1 m 100 dB

Impedance 8 ohms

Max SPL 122 dB

Horz. Coverage —

Vertical Coverage —
LF Transducer 12” (300 mm)

High excursion
dual voice coil

HF Transducer —

Protection —

Specifications (Cont.) 12.1/12.1P

Terminals Spring

Enclosure Material MDF, Steel

fastener reinforced

“t” Version —
Wattage Taps

Dimensions

16.5” x 23” x 12”

(H x W x D) 412 x 584 x 305 mm

Net Weight 40 lb. (18.1 kg)

EVID™SYSTEMS

No matter what the installation calls for the new EVID ceiling speaker line can fill the

need. Each model is unique and designed to meet the toughest “problem” job specifications.

Sonically superior and aesthetically pleasing, the EVID ceiling speaker line has no match.

From the compact, powerful C4.2 to the exclusive waveguide coupled design of the C8.2HC

(patent pending) for high ceiling environments; the EVID ceiling line will solve any installation

requirement.

™

EVID C4.2 Compact ceiling speaker

Perfect for conventional rooms. Excellent bandwidth in an aesthetically, unobtrusive installation

profile. Its compact design fits in tight areas. Fully rated for use in air handling spaces. Its 4 woofer

and waveguide coupled titanium coated dome tweeter give smooth, wide frequency response.The

enclosure is ported and tuned to provide surprising bass response in such a compact package. Features

an easy 3-point mounting system for quick installations. Comes complete with mounting support ring

and tile rails. No additional accessories needed for most installations.

EVID C8.2 High performance ceiling speaker

Never before has a ceiling speaker system delivered such a full range punch. Its specially tuned enclosure

and 8 woofer provide amazing bass response.The 1 waveguide coupled tweeter give smooth controlled

coverage out to 18 kHz. Perfect for installations where a flush mount design is desired but demand for high
quality audio exists. Features a 4-point mounting system which makes installations fast and easy. Comes
complete with mounting support ring and tile rails. No additional accessories needed for most installations.

C8.2LP

spaces. C8.2LP spec change to 7 (181mm) in depth.

Same as C8.2 but with low profile back can (3 shorter in depth) for tight fitting ceiling

EVID C8.2HC “High” ceiling speaker system

The EVID C8.2HC is ideal for high ceiling and reverberant “problem” rooms. Its exclusive ported,

waveguide coupled 8 driver provides for excellent intelligibility and definition. The 8.2HC’s patent

pending design provides great coverage control throughout the voice range and above. No other speaker

system provides the combination of excellent pattern control, wide bandwidth, high power handling and

compact design like the C8.2HC. Features a secure 4-point mounting system which makes installations

fast and easy. Comes complete with mounting support ring and tile rails. No additional accessories needed

for most installations.

EVID C10.1 Ceiling subwoofer

The C10.1 packs a large 10 subwoofer in a tuned high performance enclosure to give amazing low

frequency performance down to 45Hz! The 10.1 is one of the only quick mount ceiling TRUE

subwoofers available on the market. Flexible installation, and powerful low-end performance make

this an ideal companion to any EVID model. Features a secure 4-point mounting system which

makes installations fast and easy. Comes complete with mounting support ring and tile rails. No

additional accessories needed for most installations.

Specifications EVID C4.2 EVID C8.2/C8.2LP EVID C8.2HC EVID C10.1

Dimensions

Weight 6 lbs (2.7 kg) 11 lbs (5.0 kg) 13.2 lbs (6.0 kg) 15.5 lbs (7.0 kg)

Frequency Response 70 Hz - 20 kHz 60 Hz - 18 kHz 60 Hz - 18 kHz 45 Hz - 150 Hz

Power Handling 50 watts 150 watts 150 watts 175 watts
(@ 8 ohms) (with overload protection) (with overload protection) (with overload protection) (with overload protection)

Coverage Pattern 130º conical 110º conical 75º conical N/A

Sensitivity 85 dB, 1w, 1m 89 dB, 1w, 1m 91 dB, 1w, 1m 93 dB, 1w, 1m

Input Configuration 8 ohms, 70v, 100v operation 8 ohms, 70v, 100v operation 8 ohms, 70v, 100v operation 8 ohms, 70v, 100v operation

™

6

70v/100v Power Taps 1.88, 3.75, 7.5, 15, 30 1.88, 3.75, 7.5, 15, 30 7.5, 15, 30, 60 7.5, 15, 30, 60

Included Accessories Tile bridge, mounting ring Tile bridge, mounting ring Tile bridge, mounting ring Tile bridge, mounting ring

6.90 x 7.10 (176 x 181 mm) 10.00 x 10.60 (255 x 270 mm) C8.2 11.90 x 12.80 (303 x 320 mm) 11.90 x 12.80 (303 x 320 mm)

10.00 x 7.00 (255 x 180mm) C8.2LP

7

An 8-inch, 175-watt two-way, high-efficiency, constant-directivity speaker system for distributed
sound applications requiring excellent sound reproduction.The small size, high sensitivity and high
power-handling capacity of the SX-80TB make it an excellent choice for use in studios, clubs, bars,
theaters or other applications.The high-frequency section of the model utilizes a molded-in 90° x 65°
constant-directivity horn — a unique pattern that contributes to high intelligibility and aims the speaker
output where it is most useful.The low-frequency section is an 8-inch direct-radiating woofer installed in
an optimally-vented enclosure — resulting in exceptionally extended bass response and high efficiency in
a very small cabinet. An internal, 60-watt line transformer offers selectable taps at 1.9, 3.8, 7.5, 15, 30 and
60 watts, allowing for easy connection to 70-volt or 100-volt speaker lines in distributed systems. Model
comes in a black cabinet.

Same as the SX-80TB except with a white cabinet.

Same as the SX-80TB except with weather-resistant construction including a full face grille.

Woofer cone is treated to resist the effects of moisture and humidity. Black polystyrene cabinet.

SX-80 Low impedance versions

Same as the SX-80TB except no 70/100-volt matching transformer. Low impedance

input with push terminal connectors.

Same as the SX-80TW except no 70/100-volt matching transformer. Low impedance

input with push terminal connectors.

Same as the SX-80PIX except no 70/100-volt matching transformer. Low impedance

input with push terminal connectors.

SX-80 Mounting hardware

Wall/ceiling/stand U-bracket for SX-80B, SX-80TB, SX-80PIX, SX-80PI (black)

Wall/ceiling/stand U-bracket for SX-80W, SX-80TW(white)

SX-80MBW

SX-80MBB

SX-80PI

SX-80W

SX-80B

SX-80PIX

SX-80TW

A 5.25-inch, 160-watt two-way monitor loudspeaker system. Ideal for distributed sound
applications that require high-quality sound reproduction.The low-frequency section is a

5.25-inch direct-radiating woofer with a polypropylene cone installed in an optimally vented,
high-impact polystyrene enclosure.The high-frequency section is a 1-inch direct-radiating soft
dome tweeter. The system’s circuits automatically reduce power delivery to the drivers if their
threshold is exceeded, greatly reducing the possibility of driver failure.The S-40TB utilizes a
transformer that offers a selection of 1.9, 3.8, 7.5, 15 and 30 watts delivered to the loudspeaker
system using either 70-volt or 100-volt lines.

Same as the S-40TB except with a white cabinet.

S-40 Low impedance versions

Same as the S-40TB except no 70/100-volt matching transformer. Low impedance

input with push terminal connectors.

Same as the S-40TW except no 70/100-volt matching transformer. Low impedance

input with push terminal connectors.

S-40 Mounting hardware

Wall/ceiling/stand U-brackets for S-40B, S-40TB (black) pair

Wall/ceiling/stand U-brackets for S-40W, S-40TW (white) pair

S-40MBW

S-40MBB

S-40W

S-40B

S-40TW

Specifications S-40 Series SX-80 Series
Frequency Response 70-20,000 Hz + 3 dB 70-20,000 Hz + 3 dB
Power Handling (long/short term) 175 watts/700 watts 175 watts/700 watts
Sensitivity 92 dB (1 watt/ 1 m) 92 dB (1 watt/ 1 m)
Output @ 1 m (continuous/peak) 114.5 dB/120.5 dB 114.5 dB/120.5 dB
Coverage (H x V) 100° x 100° 90° x 65°
Impedance (nominal) 4 ohms 8 ohms
Dimensions (H/W/D) 15.75 in. x 11.5 in. x 8.75 in. 15.75 in. x 11.5 in. x 8.75 in.

(400 mm x 292 mm x 222 mm) (400 mm x 292 mm x 222 mm)

Net Weight 16 lb. (7.3 kg) 16 lb. (7.3 kg)
Shipping Weight 18 lb. (8.18 kg) 18 lb. (8.18 kg)

8-inch 175-watt two-way constant-directivity system SX-80TB

5.25-inch 160-watt two-way system S-40TB

SURFACE MOUNT

SPEAKER SYSTEMS

To order or for more information

call 1-800-685-6386

Paging Mics Ceiling Speakers EVID

™

Systems System ExamplesProAnnounce

™

Horns and Drivers Surface Mount SpeakersAmplifiers

8

A 4-inch, compact 4-watt full-range high performance ceiling loudspeaker.This model offers an

extended 60-15,000 Hz range, ensuring clear, intelligible speech and good music reproduction. The

die-cast aluminum frame houses a magnetic structure fabricated of heavy gauge steel.The small size of

the speakers allows either front or rear mounting in walls, partitions, ceilings and into volumes as low as

0.1 cubic feet. Model 405-4T has a factory-mounted matching transformer allowing the loudspeaker to

be run from 70.7-volts or 100-volt transmission lines, drawing 0.5, 1, 2 or 4 watts.

Same as 405-4T without factory-mounted transformer. 8-ohm impedance, 16 watts.

405-8H

405-4T 4-inch compact 4-watt full-range high performance speaker

The PRO-8A is accurate, highly intelligible and musical sounding loudspeaker that is well suited for the
reproduction of both voice and music.The PRO-8A employs an unusually large 1-1/2-inch voice coil.

This provides increased apex-driving-point cone area and greater thermal capabilities.The result is higher

acoustic power output than other brands, which translates into unmatched durability and reliability at lower

levels. High frequencies are reproduced by a 1-1/2-inch piezoelectric tweeter that is mounted directly

to the pole piece of the woofer. The tweeter being mounted to a stationary surface at the apex

of the woofer minimizes intermodulation distortion and allows for improved time alignment over other

coaxial ceiling speaker designs.An acoustically transparent dust dome mounted on the woofer cone

encapsulates the tweeter offering excellent dust protection for both the woofer voice coil and the tweeter.

The PRO-8A series of speakers may be used in ported enclosures where improved low-frequency

response is desired. Placing the loudspeaker in an enclosure of 1.0 cubic foot with a box-tuning

frequency of 75 Hz will yield a –3 dB point of 80 Hz.An 80 Hz tuning may be obtained with a port

having an area of 7.0 square inches and a length of 0.75 inches.

Same as PRO-8A except it comes with a 70.7/100-volt line transformer offering

a selection of 0.62-, 1.25-, 2.5- and 5-watt taps.

Same as PRO-8A except it comes with a 70.7/100-volt line transformer offering

a selection of 3.75-, 7.5-, 15- and 30-watt taps.

PRO-8AT30

PRO-8AT5

PRO-8A 8-inch 30-watt premium two-way speaker

Specifications 205-8A 205-4T 205-8T 405-8H 405-4T PRO-8A PRO-8AT5 PRO-8AT30
RMS Power @ 8 Ohms 10 W — — 16 W — 30 W — —
Frequency Response 90-18,000 Hz 90-18,000 Hz 90-18,000 Hz 60-15,000 Hz 60-15,000 Hz 82-16,000 Hz 82-16,000 Hz 82-16,000 Hz
Sensitivity 1 W @ 1 m 91 dB 91 dB 91 dB 90 dB 90 dB 96 dB 96 dB 96 dB
Max SPL @ Full Power 101 dB 101 dB 101 dB 102 dB 102 dB 110 dB 110 dB 110 dB
Transformer 8 ohms 0.25, 0.5, 1,2,4 1, 2, 4, 8 8 ohms 0.5, 1, 2, 4 8 ohms 0.62, 1.25, 2.5, 5 3.75, 7.5, 15, 30
Height 2.2 in. (56 mm) 3.7 in. (94 mm) 3.7 in. (94 mm) 2.12 in. (54 mm) 4.06 in. (103.2 mm) 3.15 in. (80 mm) 3.15 in. (80 mm) 3.15 in. (80 mm)
Net Weight 2 lb. (0.9 kg) 2.8 lb. (1.26 kg) 2.8 lb. (1.26 kg) 2.1 lb. (0.94 kg) 2.9 lb. (1.2 kg) 2.7 lb. (1.2 kg) 3.1 lb. (1.4 kg) 3.1 lb. (1.4 kg)

CEILING SPEAKERS

A 4-inch, 10-watt continuous full-range speaker.An acoustically transparent dome encloses

a small, centrally mounted free-edge cone that is used to improve high-frequency dispersion.

Suitable for applications requiring highly intelligible speech or smooth musical reproduction.

This model includes an 8-watt transformer, allowing connections to 70.7/100-volt line, with taps

of 1, 2, 4 and 8 watts.

Same as 205-8T except with a 4-watt transformer, allowing connections to

25-, 70.7-, 100-volt line, with taps of 0.5 to 4 watts.

Same as 205-8T without factory-mounted transformer. 8-ohm impedance, 10 watts.

205-8A

205-4T

205-8T 4-inch 10-watt continuous full-range speaker

EVID

™

Systems Horns and Drivers Paging Mics ProAnnounce

™

System Examples Ceiling Speakers AmplifiersSurface Mount Speakers

To order or for more information

call 1-800-685-6386

9

An 8-inch, 10-watt full-range ceiling loudspeaker.The acoustically transparent dome encloses a small,
centrally mounted free-edge cone for improved high-frequency speech or music dispersion.The 209-4T
transformer allows connections to 25-, 70-, 100-volt line, with taps of 0.5, 1, 2 and 4 watts.

Same as 209-4T without factory-mounted transformer. 8-ohm impedance, 10 watts.

An 8-inch, 10-watt full-range loudspeaker for distributed sound systems. Nominal 8-ohm
impedance. Suitable for use in applications requiring highly intellig ible speech reproduction.An acoustically
transparent dome encloses a small, centrally mounted free-edge cone that is used to improve high-frequency
dispersion.This model comes pre-mounted on a ceiling grille and includes a transformer that allows for
connections to 25-, 70-, 100-volt line, with taps of 0.5 to 4 watts.

209-4TWB

209-8A

An 8-inch, 16-watt ceiling loudspeaker. The design provides wide dispersion, high-efficiency, high maximum
output for wide-range reproduction of music or voice.The loudspeakers feature 8-inch low-frequency cones and
high-temperature voice-coil assemblies coaxially mounted with wide-dispersion cone tweeters. Dual-magnet
construction allows each speaker to be structurally, magnetically, electrically and mechanically independent from
each other.The 309-8T utilizes a crossover network, centered at 3,000 Hz and providing 6 dB of attenuation for
the tweeter outside its operating range.This model comes with a 70.7/100-volt line transformer that offers < 1 dB
insertion loss and a selection of 1-, 2-, 4- and 8-watt taps.

Same as 309-8T except it comes with a 25-, 70.7-, 100-volt line transformer that offers < 1 dB
insertion loss and a selection of 0.5-, 1-, 2- and 4-watt taps.

Same as 309-8T without factory-mounted transformer. 8-ohm impedance, 16 watts.

An 8-inch, 16-watt ceiling loudspeaker. The design provides wide dispersion, high-efficiency, high
maximum output for wide-range reproduction of music or voice. Loudspeakers feature 8-inch low-frequency cones
and high-temperature voice-coil assemblies coaxially mounted with wide-dispersion cone tweeters. Dual-magnet
construction allows each speaker to be structurally, magnetically, electrically and mechanically independent from each
other.The 309-8TWB utilizes a crossover network, centered at 3,000 Hz and providing 6 dB of attenuation for the
tweeter outside its operating range.This model comes pre-mounted on a ceiling grille and includes a 70.7/100-volt
line transformer that offers < 1 dB insertion loss and a selection of 1-, 2-, 4- and 8-watt taps.

Same as the 309-8TWB except it comes with a 25-, 70.7-, 100-volt line transformer that offers < 1 dB
insertion loss and a selection of 0.5-, 1-, 2- and 4-watt taps.

309-4TWB

309-8TWB

309-8A

309-4T

8-inch 16-watt ceiling speaker 309-8T

An 8-inch, 32-watt premium high-performance ceiling loudspeaker.The loudspeakers’ 8-inch low-frequency cones
and high-temperature voice-coil assemblies are coaxially mounted with wide-dispersion cone tweeters. The dual
magnet construction allows each speaker to be structurally, magnetically, electrically and mechanically independent
of the other.This model utilizes a single-section crossover network, centered at 2,500 Hz and providing 6 dB of
attenuation for each element outside its operating range. Featuring a 15716 transformer for a 70.7/100-volt line,
the 409-16T offers 2-, 4-, 8- and 16-watt taps.

Same as 409-16T except it comes with a 15732 transformer offering a selection of
4-, 8-, 16- and 32-watt taps.

Same as 409-16T except it comes with a 15708 transformer offering a selection of
1-, 2-, 4- and 8-watt taps.

Same as 409-16T without factory-mounted transformer. 8-ohm impedance, 16 watts.

409-8E

409-8T

409-32T

8-inch 32-watt premium high performance speaker 409-16T

Specifications 209-8A 209-4T/TWB 309-8A 309-4T/TWB 309-8T/TWB 409-8E 409-8T 409-16T 409-32T
RMS Power @ 8 Ohms 10 W — 15 W — — 32 W — — —
Frequency Response 80-15,000 Hz 80-15,000 Hz 85-18,000 Hz 85-18,000 Hz 85-18,000 Hz 85-18,000 Hz 85-18,000 Hz 85-18,000 Hz 85-18,000 Hz
Sensitivity 1 W @ 1 m 94 dB 94 dB 96 dB 96 dB 96 dB 97 dB 97 dB 97 dB 97 dB
Max SPL @ Full Power 104 dB 101 dB 108 dB 108 dB 108 dB 112 dB 112 dB 112 dB 112 dB
Transformer 8 ohms 0.25, 0.5, 1, 2, 4 8 ohms 0.25, 0.5, 1, 2, 4 1, 2, 4, 8 8 ohms 1, 2, 4, 8 2, 4, 8, 16 4, 8, 16, 32
Height 2.8 in. (71 mm) 2.8 in. (71 mm) 2.8 in. (71 mm) 2.8 in. (71 mm) 2.8 in. (71 mm) 3.25 in. (83 mm) 4.50 in. (114 mm) 4.86 in. (124 mm) 5.38 in. (137 mm)

(TWB) 3 in. (76 mm) 3 in. (76 mm) 3 in. (76 mm)

Net Weight 2.2 lb. (1 kg) 3 lb. (1.35 kg) 2.8 lb. (1.26 kg) 3.1 lb. (1.4 kg) 3.1 lb. (1.4 kg) 2.8 lb. (1.3 kg) 4 lb. (1.8 kg) 4.5 lb. (2.0 kg) 5 lb. (2.3 kg)

(TWB) 3.6 lb. (1.6kg) 5.1 lb. (2.3 kg) 5.1 lb. (2.3 kg)

8-inch 10-watt full-range ceiling speaker 209-4T

CEILING SPEAKERS

Paging Mics Ceiling Speakers EVID

™

Systems System ExamplesProAnnounce

™

Horns and Drivers Surface Mount SpeakersAmplifiers

10

.6 cu.ft. round back enclosure for 8-inch speaker (for existing construction)

1.5 cu.ft. round back enclosure for 8-inch speaker (for new construction)

5184-N

5184-E Round back enclosure

CEILING SPEAKER
MOUNTING COMPONENTS

8-inch round loudspeaker grille with
white finish 12.63-inch diameter
(32.1-centimeter diameter)

5281-W

Round grille

4-watt speaker transformer for 70.7-volt line

with 0.5-, 1-, 2- and 4-watt taps. 0.5 dB insertion loss.

8-watt speaker transformer for 25/70.7-volt

line with 1-, 2-, 4- and 8-watt taps. 0.5 dB insertion loss.

16-watt speaker transformer for 70.7-volt line

with 2-, 4-, 8-, and 16-watt taps. 0.5 dB insertion loss.

32-watt speaker transformer for 70.7-volt line

with 4-, 8-, 16- and 32-watt taps. 0.5 dB insertion loss.

15732

15716

15708

15704

Speaker Transformers

Speaker Box Depth Cu. Ft. Shape Grilles T-Bridge

All 209’s, All 309’s 5184-E 4-1/8" .6 Round 5281-W 5487-X
409-8E, All Pro-8A’s Existing Construction round

All 209’s, All 309’s 5184-N 4-1/8" .5 Round 5281-W —
409-8E, All Pro-8A’s New Construction round

All 205’s, All 405’s 5195-X 6-13/16" .25 Round 5295-W round —

screw mounting

Cross-reference chart Ceiling speakers and hardware

EVID Ceiling Speaker Installation Accessories

Rough-in mounting plate for use with the

EVID C8.2 and C8.2LP (package of 4)

Rough-in mounting plate for use with the

EVID C8.2HC and C10.1 (package of 4)

Rough-in mounting system for use with the
EVID C8.2 and C8.2LP. Includes junction box and flexible
conduit to support pre-wiring of the installation
(package of 2)

Rough-in mounting system for use with the
EVID C8.2HC and C10.1. Includes junction box and
flexible conduit to support pre-wiring of the installation
(package of 2)

RPK-810

RPK-82

RR-810

RR-82

5195-X

RR-42

Round back enclosure

Back enclosure, 1/4 cu. ft. for
5295-WM grille. 4-inch speaker

Grille assembly. Round

grille, white, screw mounting

5295-W

Rough-in
mounting plate

For use with the EVID C4.2

(package of 4)

RPK-42

Rough-in
mounting system

For use with the EVID C4.2.

Includes junction box and

flexible conduit to support

pre-wiring of the installation

(package of 2)

EVID

™

Systems Horns and Drivers Paging Mics ProAnnounce

™

System Examples Ceiling Speakers AmplifiersSurface Mount Speakers

11

CEILING SPEAKER

MOUNTING COMPONENTS

To order or for more information

call 1-800-685-6386

Compound diffraction projector

FC100

A compound diffraction horn consisting of two sections for use
with 1828 or 1829 series drivers.The folded construction of the rear
horn coupled with the smaller dimensions of the front horn provides
a more extended frequency response and cleaner sound. FC100 comes
in weather-resistant gray and includes an integral mounting bracket.
Compound diffraction design, wide coverage pattern, and
150°H x 110° V at 2 kHz dispersion.

A folded sectoral horn for all driver models in the 1824S, 1828,
1829, ID30, ID60 series and 7110XC. Features a patented design
that eliminates high frequency phase cancellation and improves
intelligibility. Cobreflex IIB provides an 80° x 60° dispersion, comes
in weather-resistant gray and includes an integral mounting bracket.
High efficiency and low cutoff frequency in a compact package.

Folded sectoral horn Cobreflex®IIB

H

ORNS

A folded sectoral horn for all driver models in the 1824S, 1828, 1829,
ID30, ID60 series and 7110XC. Features a patented design that eliminates
high frequency phase cancellation and improves intelligibility. Cobreflex
III provides an 100° x 60° dispersion, comes in weather-resistant gray
and includes an integral mounting bracket. High efficiency and low
cutoff frequency in a compact package.

Folded sectoral horn Cobreflex®III

1. Low frequency limit based on capability of driver used. If horn cutoff
is higher than rated limit of driver, cutoff will be determining factor.

2. Polar curves @ 10' in an anechoic chamber, 1/3 octave brand­limited pink noise (-6 dB points).

Specifications FC100

Low-Freq Rolloff

1

-12 dB 260 Hz

Dispersion

2

2 kHz 150° H x 110° V
Dimensions, in. (cm) 20.5 H x 10.5 W x 20.0 D

(52.0 H x 26.5 W x 51.0 D)

Shipping Weight 21 lb. (9.5 kg)

Specifications Cobreflex IIB Cobreflex III

Beamwidth (@ 2 kHz) 80° H x 60° V 100° H x 60° V
Directivity Factor, Rθ(Q) 9.1 @ 2 kHz 15.9 @ 2 kHz
Lower Usable Limit 250 Hz min. 250 Hz min.
Dimensions, in. (cm) 9.3 H x 18.5 W x 10.3 D 14.5 H x 27.5 W x 15.0 D

(23.6 H x 47.0 W x 26.2 D) (36.8 H x 69.9 W x 38.1 D)

Net Weight 5.1 lb. (2.3 kg) 7 lb. (3.2 kg)
Shipping Weight 6.7 lb. (3.0 kg) 10 lb. (4.5 kg)

Compatible Drivers

1828C/T 1829BT

Compatible Drivers

1828C/T 1829BT/B

ID30C-8/16/T ID60D-T 7110XC

Compatible Drivers

1828C/T 1829BT/B

ID30C-8/16/T ID60D-T 7110XC

11

Paging Mics Ceiling Speakers EVID

™

Systems System ExamplesProAnnounce

™

Horns and Drivers Surface Mount SpeakersAmplifiers

12

Specifications CDP-848AT CDP-850T CFID32-T IBC8

Power Handling (500 Hz-5 kHz) 30 watts 60 watts 32 watts 30 watts
Frequency Response 260 HZ-10 kHz 280 Hz-8 kHz 330 Hz-4.2 kHz (±5 dB) 500 Hz-7 kHz (±5 dB) 350 Hz lower usable limit
Acoustic Crossover 1 kHz 1 kHz N/A —
Sensitivity (1m, 500 Hz-5kHz) 105 dB SPL, 1 W, 1 m 105 dB SPL, 1 W, 1 m 107 dB SPL, 1 W 107 dB SPL, 1 W, 1 m
Impedance 70.7 V transformer 70.7 V transformer 25 or 70.7 V Xfmr for -T models 8 ohms nominal
Beamwidth (@ 2 kHz) 150° H x 110° V 150° H x 110° V 55° H x 74° V 60°
Directivity Factor, Rθ(Q) 7.4 @ 2 kHz 5.2 @ 2 kHz 16.3 @ 2 kHz N/A
Sensitivity as Microphone —— -26 dBm -26 dBm (ref.: 10 dynes/cm

2

)

Dimensions, in. (cm) 20.5 H x 10.5 W x 20.0 D 20.5 H x 10.5 W x 20.0 D 7.1 H x 14.4 W x 12.5 D 10.5 dia. x 9.0 deep

(52.0 H x 26.5 W x 51.0 D) (52.0 H x 26.5 W x 51.0 D) (18.1 H x 36.5 W x 31.8 D) (26.0 dia. x 22.9 deep)

Shipping Weight 18 lb. (8.2 kg) 21 lb. (9.5 kg) CFID 32-8: 6 lb. (2.7 kg) 4.5 lb. (2.0 kg)

CFID 32-T: 6.3 lb. (2.9 kg)

A 30-watt compound diffraction projector.Wide range, integrated horn-and-dr iver system.

Single driver is fitted to two coaxial horns, each coupled to opposite sides of the driver

diaphragm.Weather-resistant gray with 150° H x 110° V at 2 kHz. Compound diffraction

design allows for more uniform dispersion throughout the frequency range.The CDP-848AT

features a 30-watt 1828T driver, 260 Hz-10 kHz frequency response, uniform dispersion over

the frequency range and heavy-duty drivers with 25/70.7-volt transformers offering 0.5-, 1-,

2-, 4-, 8-, 15- and 30-watt taps.

The IBC8 is a 30-watt high-powered reentrant paging projector/talkback speaker. Designed for use in

adverse ambient conditions, the IBC8 is weather-resistant and appropriate for outdoor or indoor use.

Features 60° dispersion at 2 kHz, integral swivel mounting bracket, gray color and 8-ohm impedance.

IBC8 30-watt reentrant paging projector/talkback speaker

This 32-watt paging projector is designed for high speech intelligibility under adverse ambient conditions.

Low distortion and smooth frequency response make the CFID32-T a good choice for background music
in indoor or outdoor applications. 55° H x 74° V at 2 kHz, 25/70.7-volt transformer with 1.25-, 2.5-, 5-,
10-, 15- and 32-watt taps. CFID32-T comes in weather-resistant gray and offers diffraction effect for wide

horizontal dispersion, 330 Hz-4.2 kHz frequency response, integral swivel bracket and weather-sealed
gland-nut connection.

CFID32-T 32-watt paging projector

A 60-watt compound diffraction projector.Wide range, integrated horn-and-dr iver system. Single

driver is fitted to two coaxial horns, each coupled to opposite sides of the driver diaphragm.

Weather-resistant gray with 150° H x 110° V at 2 kHz. Compound diffraction design allows for more

uniform dispersion throughout the frequency range.The CDP-850T features a 60-watt 1829BT driver,

280 Hz-8 kHz frequency response, uniform dispersion over the frequency range and heavy-duty drivers

with 25/70.7-volt transformer offering 8-, 15-, 30- and 60-watt taps.

CDP-850T 60-watt compound diffraction projector

CDP-848AT 30-watt compound diffraction projector

PAG ING HORNS

A 25-watt submergence-proof design (U.S. Navy specification) with a serrated mounting

bracket allowing for a 90° arc swivel. Ideal for use near water or spray. The gray MM2 features an

82° x 82° dispersion pattern and 16-ohm impedance. Each unit is fully protected against damage

from high humidity, salt water and other environmental conditions.

Same as MM2 except with a flush mount designed for mounting on the front

surface of bulkhead, wall or ceiling.

Same as MM2 except with a surface/bulkhead mount and watertight internal matching

transformer compartment. Requires University Sound 5030 transformer part no. 56-05-022109-04.

MM2TC

MM2F

MM2

MM2/MM2F/MM2TC 25-watt submergence proof speakers

EVID

™

Systems Horns and Drivers Paging Mics ProAnnounce

™

System Examples Ceiling Speakers AmplifiersSurface Mount Speakers

13

The MIS8C is a 10-watt paging/talkback projector with a compact design
for flush mounting on walls and cabinets. Ideally suited for paging and general
communication applications.The gray MIS8C features 100° dispersion and
8-ohm impedance.

This horn is designed to provide a dispersion pattern that is constant over a 2 kHz
to 10 kHz frequency range, reducing the number of horns needed to cover an area.
The tan, weather-resistant PA430 features a 60° x 40° dispersion pattern, integral
swivel bracket and a 25-, 70.7-, 100-volt transformer with 1.9-, 3,7-, 7.5-, 15­and 30-watt taps.

Same as PA430T except without a transformer, 8-ohm impedance.

PA430

30-watt constant-directivity paging projector PA430T

This weather-resistant projector is an excellent choice for any outdoor or indoor public
address/paging application where reliability and durability are important. Driver employs a
rugged phenolic diaphragm and a “rim-centered” ferrite magnetic structure for dependability
under extreme operating conditions. Durable ABS horn and die-cast zinc integral swivel
mount.The tan PA60 provides an 80° x 50° dispersion pattern and 8-ohm impedance.

60-watt reentrant paging projector PA60

To order or for more information

call 1-800-685-6386

10-watt paging/talkback projector MIS8C

PAGING HORNS

The UW30 underwater speaker is equipped with a waterproof, 3-conductor 50-foot cable.
8-ohm impedance, available in pool blue. Underwater speakers are required by the American
Athletic Union for synchronized swimming events and instructions in Olympic pools.They
are also ideal for water ballets or similar water shows and resort or private pools. Built for
installation in both fresh and salt water pools, the UW30 can even be safely installed in
ocean environments. Designed for permanent installation and completely submerged
operation. Problems such as corrosion and electrolysis damage are completely eliminated
due to the plastic construction. The 12.7-ounce ceramic magnet and state-of-the-art
voice-coil construction assure full-fidelity response with the lowest possible distortion
throughout its power range. One speaker is recommended for pools up to 30 by 30
feet, or two speakers for pools up to 30 by 60 feet.

30-watt underwater speaker UW30

Paging Mics Ceiling Speakers EVID

™

Systems System ExamplesProAnnounce

™

Horns and Drivers Surface Mount SpeakersAmplifiers

Specifications MM2 MM2F MM2TC UW30

Power Handling

25 watts 25 watts 25 watts 30 watts

(500 Hz-5 kHz pink noise)
Frequency Response

800 Hz-5 kHz 800 Hz-5 kHz 800 Hz-5 kHz 100 Hz-10 kHz

(±5 dB)
Sensitivity

104 dB SPL 104 dB SPL 104 dB SPL N/A

(dB SPL @ 1 W, 1 m)
Nominal Impedance

16 ohms 16 ohms 16 ohms 8 ohms

(w/o line transformer)

Dimensions, in. (cm) 6.0 dia. x 5.0 D 7.3 dia. x 3.8 D 10.0 H x 6.4 W x 4.4 D 7.2 dia. x 2.6 D

(15.2 dia. x 12.7D) (18.5 dia. x 9.7D) (25.4 H x 16.3 W x 11.2 D) (18.3 dia. x 6.6 D)

Net Weight 5.3 lb. (2.4 kg) 6 lb. (2.7 kg) 8.8 lb. (4.0 kg) 4 lb. (1.8 kg)

Specifications PA430 & PA430T PA60

Power Rating (500 Hz-5 kHz) 30 watts 60 watts
Frequency Response 400 Hz-6.5 kHz, ±5 dB, 600 Hz-6.5 kHz (±5 dB)

350 Hz lower usable limit

Sensitivity 1m 107 dB SPL, 1W, 1m, 107 dB SPL
(500 Hz-5 kHz) pink noise (500 Hz-5 kHz pink noise)
Impedance 8 ohms nominal 8 ohms

(PA430T: 5-way power selector)

Beamwidth (@ 2 kHz) 60° H (±20°); -6 dB points 80° H x 50° V @ 2 kHz

1 kHz through 10 kHz;
40° V (+20°, -10°); -6 dB points 2 kHz through 10 kHz

Directivity Factor, Rθ(Q) 15.2 @ 2 kHz 7.9 @ 2 kHz
Dimensions, in. (cm) 8.9 H x 12.1 W x 12.2 D 11.0 H x 6.5 W x 8.5 D

(22.6 H x 30.7 W x 31.0 D) (27.9 H x 16.5 W x 21.6D)

Shipping Weight PA430: 3 lb. (1.4 kg) 4.1 lb. (1.8 kg)

PA430T: 3.8 lb. (1.7 kg)

14

A 30-watt heavy-duty convertible driver designed

for use with compound diffraction horns. Designed

for general public address applications, the 1828T

includes a built-in transformer with selectable power

taps at 0.5, 1, 2, 4, 8, 15, 30 watts to accommodate

25- and 70.7-volt lines.Weather-resistant for outdoor or

indoor use, dual 1-inch screw-on exit, wide frequency

response. Comes with threaded plug to convert to

conventional driver.

Same as 1828T except without transformer,

8-ohm impedance.

1828C

A 60-watt heavy-duty convertible driver designed for use with
compound diffraction horns. Designed for general public address
applications, the 1829BT includes a built-in transformer with

selectable power taps at 8, 15, 30 and 60 watts to accommodate

70.7-volt lines.Weather-resistant for outdoor or indoor use, dual
1-inch screw-on exits, wide frequency response. Comes with
threaded plug to convert to conventional driver.

Compatible Horns

Cobreflex IIB

Cobreflex III

FC100

Specifications 1828C/1828T 1829BT

Power Handling (500 Hz-5 kHz pink noise) 30 watts 60 watts
Frequency Response 260 Hz-10 kHz, ±5 dB 280 Hz-8 kHz, ±5 dB
Sensitivity (1 W, 1 m, 500 Hz-5 kHz 105 dB SPL 105 dB SPL
pink noise, Cobreflex III horn) (*on FC100) (*on FC100)
Nominal Impedance 8 ohms 16 ohms
Dimensions, in. (cm) 3.3 dia. x 4.0 depth 5.3 dia. x 4.1 depth

(8.4 dia. x 10.2 depth) (13.5 dia. x 10.4 depth)

Net Weight 4.7 lb. (2.1 kg) 7 lb. (3.2 kg)

1828T: 5 lb. (2.3 kg) 1829T: 9.8 lb. (4.4 kg)

1829BT 60-watt driver for compound diffraction projector

1828T 30-watt driver for compound diffraction projector

COMPRESSION DRIVERS

Compatible Horns

Cobreflex IIB

Cobreflex III

FC100

EVID

™

Systems Horns and Drivers Paging Mics ProAnnounce

™

System Examples Ceiling Speakers AmplifiersSurface Mount Speakers

To order or for more information

call 1-800-685-6386

15

A 30-watt “explosion-proof ” driver that will
not create a spark or detonate in an explosive
atmosphere. Integral sintered bronze acoustic screen
and heavy die-cast aluminum case meet the UL
standards for explosion-proof classification. Meets or
exceeds standards for use in hazardous areas classified as
Class I – Groups B, C and D, plus Class II – Groups E, F
and G. Dual 1-inch screw-on exits, 8-ohm impedance.
Driver housing is designed to contain a University Sound
5030 transformer for 20/70.7-volt distributed systems.
Transformer purchased separately.

A 30-watt heavy-duty driver for reentrant horns. Designed for
use in applications that require continuous, high-level acoustic
output such as high-level public address. Features rugged, weather­resistant phenolic diaphragms, indoor/outdoor packaging, 1-inch
screw-on exit and a 25/70.7-volt transformer with 1.25-, 2.5-, 5-,
10-, 15- and 30-watt taps.

Same as ID30CT except without transformer,

16-ohm impedance.

Same as ID30CT except without transformer,

8-ohm impedance.

ID30C-8

ID30C-16

30-watt driver for reentrant horns ID30CT

A 60-watt heavy-duty driver for reentrant horns. Designed for
use in applications that require continuous, high-level acoustic
output such as high-level public address. Features rugged, weather­resistant phenolic diaphragms, indoor/outdoor packaging, 1-inch
screw-on exit and a 25/70.7-volt transformer with 1.88-, 3.75-,

7.5-, 15-, 30- and 60-watt taps.

60-watt driver for reentrant horns ID60DT

COMPRESSION DRIVERS

Compatible Horns

Cobreflex IIB

Cobreflex III

Compatible Horns

Cobreflex IIB

Cobreflex III

Compatible Horns

Cobreflex IIB

Cobreflex III

Specifications 7110XC ID30 Series ID60DT

Power Handling (500 Hz-5 kHz) pink noise 30 watts 30 watts 60 watts
Frequency Response 500 Hz-4 kHz, ±5 dB 500 Hz-4 kHz,±5 dB 500 Hz-4 kHz, ±5 dB
Sensitivity (1 W, 1 m 500 Hz-5 kHz 100 dB SPL 106 dB SPL 107 dB SPL
pink noise, Cobreflex III horn)
Nominal Impedance

8 ohms (on CF III) 8 ohms (ID30C-8) 8 ohms (ID60D-8)

16 ohms (ID30C-16) 25/70.7 CV (ID60DT)
25/70.7 CV (ID30CT)

Dimensions, in. (cm) 7.9 dia. x 7.4 D 4.2 dia. x 5.2 depth 5.6 dia. x 6.4 depth

(20.1 dia. x 18.8 D) (10.7 dia. x 13.2 depth) (14.2 dia. x 16.3 depth)

Net Weight 12 lb. (5.4 kg) 3.5 lb. (1.6 kg) 5.9 lb. (2.7 kg)

ID30CT: 4.5 lb. (2.0 kg) ID60CT: 7.4 lb. (3.4 kg)

30-watt explosion proof driver 7110XC

Paging Mics Ceiling Speakers EVID

™

Systems System ExamplesProAnnounce

™

Horns and Drivers Surface Mount SpeakersAmplifiers

Same as 1407A except with 150-watt continuous average output power.

1415A

16

A 75-watt output power amplifier. Ideal for general-purpose applications in clubs,
convention centers, meeting halls, etc. Accommodates four input types: 5-lug screw
terminal, male or female XLR and phono connector. Amplifiers include a bridging
transformer, 300 Hz switchable high pass filter and 15 dB switchable input pad.Two
auxiliary unbalanced outputs are also provided: pre-fader and post-fader from the master
output level control. Includes an 8-ohm direct output and balanced outputs including
4 ohm, 25-volts and 70.7-volts.The amplifiers are fully protected from short circuited
loads, overheating and excessive load reactance.Also protected from loads from
turn-on/turn-off transients, subsonic signals and DC offsets.

1407A Power amplifier

MA-1212 12-input mixer/amplifier 120-watt output

Same as the MA-1212 but features 60 watts of amplifier power.

MA-1206

The MA-1200 series of professional rack mount mixer/amplifiers are designed for larger
BGM/paging and public address system installations where expandability and flexibility
is the ticket.These new units are exceptional values, loaded with features and are easy to
install in a variety of system designs.The MA-1212 provides a powerful 120 watts of output
power into 70v/100v or 4/8 ohm loads.The units feature 12 separate input channels for
maximum flexibility in large installations.

Specifications 1407A 1415A
Frequency Response

Ref 1 kHz at Ref 1 kHz at
1 watt output power 1 watt output power

Direct Output,

±1 dB

20 Hz-20 kHz 20 Hz-20 kHz

±3 dB

10 Hz-30 kHz 10 Hz-30 kHz

THD

0.01% (Ref 1 kHz) 0.01% (Ref 1 kHz)

Power Bandwidth

(±3 dB Ref. 1 kHz (±3 dB Ref. 1 kHz
at rated output power) at rated output power)

Transformer Output

50 Hz-15 kHz 50 Hz-15 kHz
(Any output tap) (Any output tap)

Dimensions

Height

5.25 in. (13.3 cm) 5.25 in. (13.3 cm)

Width

19.0 in. (48.3 cm) 19.0 in. (48.3 cm)

Depth

12.5 in. (31.8 cm) 12.5 in. (31.8 cm)

Weight

24.2 lb. (11.0 kg) 30.8 lb. (14.0 kg)

Damping Factor

>50 >50

Signal-to-Noise Ratio

>100 dB >100 dB

Transformer Output

(Any Output Tap) ±1 dB

20 Hz-16 kHz 20 Hz-16 kHz

Transformer Output

(Any Output Tap)

95 watts 190 watts

Direct Output

20 Hz-20 kHz 20 Hz-20 kHz

Continuous Average Output Power

(Direct or Transformer Output)

75 watts 150 watts

Maximum Midband Output Power
(Ref. 1 kHz, 1% THD) Direct Output

100 watts 200 watts

Specifications MA-1212 MA-1206 MA-606

Power Output @ 1kHz

120 watts 60 watts 60 watts

Frequency Response

50 Hz-15 kHz, ±3 dB 50 Hz-15 kHz, ±3 dB 50 Hz-15 kHz, ±2 dB

Input Sensitivity/Impedance

Mic Setting

0.3 mV/600 ohm (balanced) 0.3 mV/600 ohm (balanced) 0.3 mV/600 ohm (balanced

Line Setting

75 mV/47 kohm (balanced) 75 mV/47 kohm (balanced) 75 mV/47 kohm (balanced)

Paging

-20 dBm/600 ohm -20 dBm/600 ohm -20 dBm/600 ohm
(transformer isolated) (transformer isolated) (transformer isolated)

Power Amp In

1 V/10 kohm (unbalanced) 1 V/10 kohm (unbalanced) 1 V/10 kohm (unbalanced)

Auxiliary

100 mV to 1V/ (unbalanced) 100 mV to 1V/ (unbalanced) 100 mV to 1V/ (unbalanced)

THD (at Rated Output)

<1% @ 1 kHz <1% @ 1 kHz <1% @ 1 kHz

Tone Controls,

Bass

+-10 dB @ 100 Hz +-10 dB @ 100 Hz +-10 dB @ 100 Hz

Treble

+-10 dB @ 10 Hz +-10 dB @ 10 Hz +-10 dB @ 10 Hz

Muting

40 dB attenuation 40 dB attenuation 40 dB attenuation

Power Dissipation

390 watts 250 watts 220 watts

Power Supply

108-132 V ac, 50/60 Hz 108-132 V ac, 50/60 Hz 108-132 V ac, 50/60 Hz

Dimensions

Height

5.2 in. (13.3 cm) 5.2 in. (13.3 cm) 5.2 in. (13.3 cm)

Width

18.9 in. (48.0 cm) 18.9 in. (48.0 cm) 18.9 in. (48.0 cm)

Depth

12.6 in. (32.0 cm) 12.6 in. (32.0 cm) 12.6 in. (32.0 cm)

Net Weight

25.4 lb (11.5 kg) 19.9 lb (9 kg) 19.0 lb (8.5 kg)

The MA-606 is a versatile 60-watt mixer/amplifier suited for a variety of small and
medium sized installations where up to sources are being used. It features 2 phono plug
type stereo summing inputs and 4 mic/line switchable balanced inputs. It also has a fixed
or adjustable balanced line level output for adding auxiliary devices or additional power
amplifiers.The telephone paging input with priority override adds versatility for paging
applications. Its 60-watt power amplifier can drive either low impedance or 70v/100v
speaker loads.

MIXER-AMPLIFIERS/
P

OWER AMPLIFIERS

MA-606 6-input mixer/amplifier 60-watt output

EVID

™

Systems Horns and Drivers Paging Mics ProAnnounce

™

System Examples Ceiling Speakers AmplifiersSurface Mount Speakers

To order or for more information

call 1-800-685-6386

17

All Electro-Voice CPS amplifiers are made to meet the highest requirements of any
demanding application.The mechanical construction follows the highest precision standards
of the industry. The extensive 5-way protection system features comparator circuitry
which constantly monitors the input and output signals and activates the internal
limiters whenever a non-linear operational state is encountered.This provides reliable
protection of the connected loudspeaker systems against overload and clipping.This
exclusive protection system provides on-board protection against thermal and capacitive
overload, short-circuit and the occurrence of HF or DC at the output. Additionally, special
circuitry prevents the output-stage transistors from being damaged by Back-EMF.
During soft start, delayed switching of the power outputs is accomplished via relays
and a limiter controls the initial current inrush, preventing the mains fuse from being
blown during the power-on operation.

The electronically balanced inputs are provided via XLR-type and Phoenix connectors
which are also used to loop the signal through. Using the Input Routing-switches lets
you determine if the amplifiers are operated in stereo or monaural mode; “monobridged”
operation is also possible.The dB-scaled level controls are to be found on the rear panel.
These potentiometers guarantee precise and reliable operation. In normal operation all
CPS power amplifiers can be used to drive loads down to 2 ohms; in bridged mode
the minimal load is 4 ohms. All amps are equipped with extremely silent running fans
providing front-to-rear air circulation, guaranteeing trouble-free operation even in
smaller power amplifier rack systems.

The CPS2 incorporates all the advanced features of the CPS1 but can deliver

up to 600 watts of power at 1kHz into 4 ohms.

The CPS2t offers all the performance of the CPS2 and adds the capability
of 70v/100v constant voltage operation. It also features Transformer Saturation Protection
(TSP) that monitors the current demands of the 70v/100v matching transformer and can
protect against overload and distortion.

CPS2t

CPS2

Power amplifier CPS1

60-watt

75-watt

150-watt

200-watt

300-watt

400-watt

600-watt

15600

15470A

15300

15200

15150

15075

15060

4/8-ohm primary load, 70.7/100-volt secondary load, 0.5 dB insertion loss.

Power amplifier output Transformers

Specifications CPS1 CPS2 CPS2t

Maximum Power

2 ohms 650 watts 850 watts 850 watts

(<1% THD, 1 kHz

4 ohms 450 watts 600 watts 600 watts

both channels driven)

8 ohms 280 watts 380 watts 380 watts

Rated Power

2 ohms 450 watts 650 watts 650 watts

(<0.2% THD, 20 to 20,000 Hz

4 ohms 350 watts 500 watts 500 watts

both channels driven)

8 ohms 230 watts 300 watts 300 watts

Maximum Bridged Output

4 ohms 1300 watts 1700 watts 1700 watts

(<1% THD, 1 kHz)

8 ohms 900 watts 1200 watts 1200 watts

Slew Rate

25 V/ms 30 V/ms 30 V/ms

Total Harmonic Distortion

<0.05% <0.05% <0.05%

Intermodulation Distortion

<0.08% <0.08% <0.08%

Crosstalk (at 1 kHz)

<-80 dB <-80 dB <-80 dB

Input Impedance (Balanced)

20 k ohms 20 k ohms 20 k ohms

Signal to Noise Ratio (dB-A Weighted)

>105 dB >105 dB >105 dB

Dimensions

Height

5.2 in. (133 mm) 5.2 in. (133 mm) 5.2 in. (133 mm)

Width

19.0 in. (483 mm) 19.0 in. (483 mm) 19.0 in. (483 mm)

Depth

15.2 in. (386 mm) 15.2 in. (386 mm) 15.2 in. (386 mm)

Weight

33.1 in. (15.0 kg) 35.3 in. (16.0 kg) 49.6 in. (22.5 kg)

Power requirements: 120v, 50 Hz - 60 Hz, factory configured.
Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, turn-on delay.
Cooling: Front-to-rear, 3-stage-fans.
Note: Amplifier at rated conditions, both channels driven, 8 ohms load, unless otherwise specified.

P

OWER AMPLIFIERS

/

T

RANSFORMERS

\

LOAD IMPEDANCE

Paging Mics Ceiling Speakers EVID

™

Systems System ExamplesProAnnounce

™

Horns and Drivers Surface Mount SpeakersAmplifiers

18

253 Single-zone desktop paging mic

A low-impedance single-zone paging desk microphone. Microphone housing is constructed

of strong, one-piece, die-cast zinc alloy with gray powder coat finish. 253 is equipped with a

4-conductor, 2-shield cable to allow for external relay operation.Also equipped with a front

press-to-talk bar with a locking bar lever on the side of the base. Rugged yet sensitive, the 253

should be used with amplifiers that have input impedance of 50 to 250 ohms.

A dynamic, low-impedance balanced-output microphone. Designed for general communication

and paging application use. Stand alone for desktop use or may be configured for hand-held

operation. Noise canceling design, provides base-mounted push-to-talk operation.

US622L Single-zone desktop paging mic

US600EL PTT hand mic

MP756 11-zone desktop paging mic

A hand microphone designed for maximum noise rejection in high ambient areas and effective use
without “close talking” techniques. An excellent choice for critical communication applications,
US600EL is built to withstand rough usage and atmospheric extremes.

A hand microphone featuring clear speech transmission in high ambient noise level

environments, convenient grip-to-talk activation and noise canceling dynamic design. Perfect for police,

marine and mobile paging applications.

US602FL

An 11-zone all-call microphone. MP756 features an all-call switch for simultaneous activation of all

paging zones and a paging indicator lamp.

A 3-zone all-call microphone. MP753 features an all-call switch for simultaneous

activation of all paging zones and a paging indicator lamp.

MP753

Specifications 253 US622L US600EL/FL MP756/753
Generating Element Dynamic Dynamic Dynamic Dynamic
Frequency Response 60 Hz-10 kHz 100 Hz-9 kHz 100 Hz-7 kHz 60 Hz-10 kHz
Polar Pattern Omnidirectional Noise canceling EL: Omnidirectional Omnidirectional

FL: Noise canceling

Impedance 150 ohms 150 ohms 150 ohms 200 ohms
Output Level -59 dB -57 dB -55 dB -58 dB
Switch Single zone Shorts or opens in “off ” mode Shorted in “off ” mode 11 zone and all call
Dimensions, in. 7.75 H x 4 W x 5.5 D 9.7 H x 4.5 W x 4.8 D 3.9 H x 2.7 W x 1.8 D 9 H x 4 W x 6 D
Net Weight 2 lb. (0.9 kg) 1 lb., 13 oz. (822g) 10 oz. (283.5 g) 2 lb. (0.9 kg)

including cable

PAGING/
C

OMMUNICATIONS M

ICS

EVID

™

Systems Horns and Drivers Paging Mics ProAnnounce

™

System Examples Ceiling Speakers AmplifiersSurface Mount Speakers

To order or for more information

call 1-800-685-6386

2-zone desktop paging mic SB253

Single-zone gooseneck mic SR785LN/O

A 3-zone omnidirectional gooseneck paging microphone.Any or all zones may be called by depressing
the appropriate, color-coded buttons.Three mounting screws are supplied with the microphone. Features a
durable satin-chrome finish, die-cast aluminum alloy housing, steel flex arm and aluminum mounting base.

3-zone gooseneck mic MP785

Wall plate mic WP300S

A 12-inch flexible gooseneck microphone. Features N/DYM®magnet structures that
provide up to 6 dB more sensitivity than conventional designs. A dynamic cardioid, the
US690 terminates with an XLR-type connector and plug-in mount.

A low-impedance, gooseneck microphone for single-zone paging. Designed for applications
where ruggedness, dependability and durability are the main requirements. Microphone housing
is constructed of die-cast zinc alloy to stand up to the toughest abuse and conditions. Features
a recessed aluminum grille with windscreen and a durable satin-chrome finish.All units include
a heavy-duty, 3-hole mounting flange and an extra-strength 16-inch flex arm of steel tubing.
SR785LN/O includes a push-button switch with normally “open” switching.

Same as SR785LN/O except without normally “open” switching.

SR785L

A dynamic, omnidirectional wall plate microphone. Ideal for security monitoring, fast-food and retail
outlets, warehouses and public usage applications.WP-300S mounts on standard electrical, single-gang
wall boxes.The housing of each unit is an aluminum assembly on a steel outlet plate with a brushed,
satin-chrome finish.The assembly is complete with rubber shock mount. Includes a double-pole,
double-throw switch for push-to-talk and line shorting capabilities.

Same as WP-300S except without double-pole, double-throw switch.

WP300

A dynamic paging hand microphone. NC450D’s noise-canceling design makes it particularly effective for
use in noisy locations and excellent voice response characteristics make it a good choice in quiet areas as
well. Output impedance is 200 ohms for matching low impedance input circuits.A push-to-talk switch
is located on the molded ABS microphone housing. A soft rubber lip guard assures user of correct
microphone-to-mouth positioning.

Same as NC450D except without noise-cancellation. Molded Cycolac

®

housing in pebble­grain black finish and unterminated black neoprene coil cord relieved at the housing by spring-type
strain relief.

450D

19

Gooseneck mic US690

PTT noise canceling hand mic NC450D

PAGING/

C

OMMUNICATIONS

M

ICS

Paging Mics Ceiling Speakers EVID

™

Systems System ExamplesProAnnounce

™

Horns and Drivers Surface Mount SpeakersAmplifiers

Specifications US690 SR785LN/O MP785 450D/NC450D WP300/300S
Generating Element Dynamic Dynamic Dynamic Dynamic Dynamic
Frequency Response 60 Hz-20 kHz 100 Hz-10 kHz 100 Hz-10 kHz 100 Hz-8 kHz 100 Hz-10 kHz
Polar Pattern Supercardioid Omnidirectional Omnidirectional Omnidirectional (450D) Omnidirectional

Noise canceling (NC450D)

Impedance 150 ohms 150 ohms 150 ohms 200 ohms 150 ohms
Output Level -50 dB -58 dB -58 dB -64 dB -60 dB
Switch N/A Single zone 3 zone PTT PTT

normally open (SR785LN/0) (WP300S only)
normally shorted (SR785L)

Dimensions, in. 2 dia x 16.6 long Gooseneck 16 Gooseneck 16 2.5 H x 3 W x 4 D 4.5 H x 2.75 W x 1.125 D

Body 5.25 x 1.825 Body 5.25 x 1.825

Net Weight 1 lb., 1.8 oz. (505 g) 14 oz. (397 g) 1.7 lb. (0.77 kg) 9 oz. (225 g) WP300: 3 oz. (85 g)

WP300S: 3.5 oz. (99 g)

20

DIGITAL MATRIX PAG ING/
R

OUTING SYSTEMS

Many commercial sound and distributed
audio applications require extensive
routing and control of audio signals.
Installations such as restaurants with
several different gathering areas may
require different music programs.
Wa r ehouses and office buildings need
individual zoned areas for paging
and announcements during the
course of daily business activities.

In the past, delivering a cost
efficient and workable system
to your customer required
assembling a variety of unrelated
components, many of which you
never could be sure of their
compatibility or reliability. In
addition, since many of these
components were never tested
as a system, you could not be
sure that full manufacturer
support would be available.
Now, however, one of the most
successful systems in Europe
manufactured by Telex/EV
in Germany is available
in the U.S. The Dynacord
ProAnnounce

™

system brings a
new level of performance and
installation ease to routing and
paging control systems. Each
component has been designed
and tested to work with all
featured commercial EV speakers,
microphones and amplifiers.

As you will note in the installation
examples, a variety of systems are

possible.You can be confident that
when you design and sell any paging
or background music system equipped
with EV/Dynacord products you will
get outstanding reliability and full
support for your installation. For all of
your small to large background music,
paging and audio control jobs,
ProAnnounce

™

and EV brands are

the ticket!

Small Sports Bar/Restaurant

2 Zone

EQUIPMENT LIST:

4 — EVID 4.2t Surface Mount Speaker — Bar
6 — EVID C4.2 Ceiling Speaker — Restaurant
2 — EVID C10.1 Subwoofer — Bar
1 — DRM4000 8x2 Matrix Router — Office
1 — DPA4410 4 Channel Amplifier — Office

1 — US690 Paging Mic — Hostess
1 — 253 Paging Microphone — Office
1 — NRS90258 PC Interface — Office
1 — DPP4002 Power Supply — Office
2 — Wall Controls — Various

Department Store

6 Zone

EQUIPMENT LIST:

6 —

EVID C8.2

Speaker —

Womenswear

10 —

EVID 4.2t

Speaker —

Appliances

10 —

EVID C4.2

Speaker —

White Goods

40 —

EVID C4.2 Ceiling Speaker

— Main Store

8 —

EVID 3.2t

Speaker —

Teen Clothing

4 —

EVID C10.1 Subwoofer

—

Teen Clothing

1 —

DPM4000 Matrix Manager

— Office

1 —

DMM4650 Message Manager

— Office

1 —

DPA4260 2x600 watt Power Amplifier

— Office

1 —

DPA4410 4x100 watt Power Amplifier

— Office

1 —

DCS401R Controller Board

— Office

3 —

DPC4510 Paging Station

— Various

6 — PA430t — Warehouse
1 —

DCS409R Relay Board

— Office

1 —

DCS408R Relay Board

— Office

1 —

DCS416R Control Board

—

Office

1 —

DCS412R A/D Board

— Office

1 —

DCS420 Monitor Station

— Office

1 —

DCS400 DCS Rack

— Office

1 —

NRS90228 Input Card

— Office

1 —

NRS90218 Output Card

— Office

1 —

NRS90216 Input Card

— Office

1 —

NRS90234 Input Card

— Office

4 —

NRS90240

Wall Control Module — Various

1 —

DPP4004

Power Supply —

Office

EVID

™

Systems Horns and Drivers Paging Mics ProAnnounce

™

System Examples Ceiling Speakers AmplifiersSurface Mount Speakers

CD Server

Office

Sports Bar

Remote

Control

Computer

Sports Bar

Sports Bar

Hostess

Remote
Control

Main Restaurant

Radio Tuner

DRM4000

DPA4410

Main Restaurant

C4.2

4.2t

C10.1

253

US690

Radio Tuner ComputerCD Server Printer

Office

Cashier 2

Cashier 1

Warehouse

Womens Clothing

DCS420

DPA4260

DPA4410

DCS400

DMM4650

White Goods

Appliances

Main Floor

Teen Clothing

PA430t

C8.2

C4.2

4.2t

C4.2

3.2t

C10.1

DPC4510

SPORTS BAR SYSTEM EXAMPLE

DEPARTMENT

STORE SYSTEM EXAMPLE

DTI2000

DPM4000

The DPP4004 PA power supply rack-unit is designed to provide the supply
voltage of 24 V DC (up to 4 amp capacity) for any ProAnnounce

™

system.The
power supply provides all the functions that modern PA systems require,
including: automatic and gapless switching between primary and battery supply
as well as remote ON/OFF-functions. During normal operation, the primary
output is connected to the internal switch-mode power supply. In case of
temporary power-loss, power-failure, or malfunctioning of the switch-mode
power supply, this output is switched to battery supply almost instantaneously,
providing uninterrupted power supply for all connected devices.When the mains supply
is restored, the unit automatically returns with a delay of 600 ms to mains operation.

High Capacity Rack Mount Power Supply (12 amp capacity)

Line Cord Power Supply (2 amp capacity)

DPP4002

DPP4012

21

The DPM4000 employs a digital audio matrix providing 4 inputs and 4 outputs.
Additional matrix junctions for the integrated alarm signal generators, the vocal
recording/playback unit, and the lock-on of the pilot tone and its evaluation are
also incorporated. All input signals and internally generated signals can be
freely mixed inside the matrix and routed through the 4 amplifier channels.

Optional features include an interactive chime/alarm generator, message
stacking, prerecorded message system monitoring and measurement, delay and
clock calendar functions.

The DPM4000 is capable of managing up to 16 paging stations and up to 100 output lines.
More than 150 control inputs and outputs are available for controlling and monitoring purposes
providing the possibility to generate and manage logic levels and analog levels as well.
Configuration and documentation of a ProAnnounce

™

system installation is established

through the use of the ProAnnounce

™

designer software that runs on a PC under Windows
95/98/NT/2000/XP. A variety of different input modules are available to match different
signal levels and physical connections.

An NRS90218 XLR line output card is included as a standard feature. Additional system options
are available including a variety of input transformers and additional message memory.

To order or for more information

call 1-800-685-6386

Rack mount power supply DPP4004

NRS90216

The DRM4000 is a compact and extremely flexible controller
for a variety of routing tasks in Background Music,AV
Boardroom or Paging applications. The unit can be interfaced to
the DPM4000 or it can function as a stand alone CPU for
smaller systems.The DRM4000 features integrated page ducking,
priority control, remote audio volume operation and many other features
which make the unit ideal for even complex 2 zone applications.

NRS90215 2 Channel - RJ45 Paging Input Console

NRS90216 XLR Mic/Line + 2 RCA Aux input

NRS90217 2 Channel - XLR Mic/Line input

NRS90218 2 Channel - XLR Line output

NRS90234 XLR Mic/Line - RJ45 Paging Input Console

NRS90228 2 Channel - 4 RCA Aux input

Modular interface cards

NRS90256 RS485 interface for connection to the DPM4000

NRS90258 RS232 PC interface – Includes configuration software for Windows

95/98/2000/XP systems.

Modular interface cards

NRS90234

NRS90228

8x2 Matrix router CPU DRM4000

The DMM4650 digital signal processor is packaged in a 1 RU enclosure which houses
the message recorder, alarm signal and gong signal generator, and an extremely versatile
sequencer.The message manager employs a flash-memory that is absolutely maintenance­free and provides the capability of direct digital recording and reproduction of at least 100
individual sound and speech signals. Depending on the installed storage capacity, the maximum recording
time is 16 minutes.The user can choose between different sample rates to optimize recording quality
versus recording time, based upon customer requirements. Additional options are available for the
DMM4650 including input transformers and message memory expansion.

Paging Mics Ceiling Speakers EVID

™

Systems System ExamplesProAnnounce

™

Horns and Drivers Surface Mount SpeakersAmplifiers

Digital message manager DMM4650

P

ROANNOUNCE

TM

C

ENTRAL

SYSTEM UNITS

4x4 Digital matrix manager CPU DPM4000

22

DPC4510 8 Function/10 key paging console with display

The paging stations of the ProAnnounce™system are extremely rugged, constructed of

metal, and are designed for years of trouble free operation.The “Euro-styling” provides an

attractive appearance, decidedly a notch up from typical paging equipment.

All ProAnnounce

™

series paging stations employ integrated microprocessors to control their

internal functions and data communication with the central unit.The integrated watchdog-

circuit guarantees the complete monitoring of the stations health, for truly fail-safe operation.
Additional options are available for any paging station model including lockout key switches
and input transformers.

6 Function Paging Console with Display

8 Function/20 Key Paging Console with Display

8 Function/30 Key Paging Console with Display

8 Function/50 Key Paging Console with Display

50 Key Expansion Station

DPC4350

DPC4550

DPC4530

DPC4520

DPC4106

DCS400 Digital control system expansion chassis

The ProAnnounce™digital control system expands the capability of the ProAnnounce

™

system significantly. When you add one or more DCS control cards to a ProAnnounce

™

system you can greatly expand the number of additional paging zones, add digital or
analog controls, enable remote switching and monitoring and many other functions.

Several types of expansion modules are available to control relays, zone switches, signal

lines, system control functions, audio levels etc. Several modules can be cascaded together to provide

nearly limitless system configurations.

All DCS control cards are available either as stand alone cards or as an “R” series version for mounting

in the DCS400 expansion chassis.

The DCS400 is the main chassis for the DCS “R” series system modules.The unit is 2 RU in height

and can accept up to 10 DCS-R type modules.The DCS expansion system provides dozens of

expansion options to a ProAnnounce

™

system.

Stand Alone Version “R” series version

DCS401 DCS401R Master DCS Control Module

DCS408 DCS408R Control Relay Module – 70/100v Audio Signals

DCS409 DCS409R Control Relay Module – Line Level Audio Signals

DCS412 DCS412R Logic Input Module

DCS416 DCS416R Analog I/O Interface Module

DCS expansion cards

The DCS420 is designed for monitoring power amplifier outputs and for pre-listening to
audio signal sources in ProAnnounce

™

installations.The SOURCE-key lets the user select
up to 250 different monitor sources while the VOLUME-key allows setting loudspeaker
or headphone volume level in 10 steps. MUTE switches the speaker or phones signal

ON or OFF.The sequence of monitor signal switching can be preprogrammed in the

ProAnnounce

™

designer software. (The DCS420 requires a DCS401R or DCS401

Controller Interface card.)

DCS401R

DCS408R

DTI2000 Telephone interface

The DTI2000 is a microprocessor-controlled, freely configurable telephone interface for connecting
ProAnnounce

™

systems to a telephone installation or the phone network.The DTI2000 allows
making announcements via the speaker system installation from any telephone set. Remotely
triggering signals, prerecorded text messages and control functions (macros) within the
ProAnnounce

™

system is also possible via phone connection.

EVID

™

Systems Horns and Drivers Paging Mics ProAnnounce

™

System Examples Ceiling Speakers AmplifiersSurface Mount Speakers

P

ROANNOUNCE

TM

S

YSTEM

EXPANSION COMPONENTS

DCS420 Monitor station with speaker

DIGITAL
MATRIX

P

AGING/

To order or for more information

call 1-800-685-6386

4 x 100w 4 channel power amplifier DPA4411

The DPA4411 provides 4 x 100 watts output power.The simultaneous operation of

70 V and 4Ω speaker systems is possible through its intelligent output design.This

topology allows for several configurations of the four power output channels.
Either 4 x 100 W, 1 x 200 W and 2 x 100 W or 2 x 200 W configurations are
available.The 4411 also provides extensive system control and monitor functions
which support level control, a variety of fault monitors, and signal routing.The four
electronically balanced inputs are provided as XLR-type connectors (0 dBu). Also
provided are routing switches, allowing input coupling. Remote-starting the power
amplifier is possible when it is operated on mains supply or on 24 VDC emergency
power supply.

The same platform as the DPA4411 except it does not provide the remote

control and monitoring functions.

DPA4410

The DPA4260 provides 2 x 600 watts of output power.As with the DPA4410/11

models, the simultaneous operation of 70 V and 4Ω speaker systems is possible

through its intelligent output design.The two electronically balanced inputs are
provided as XLR-type connectors (0 dBu). Remote-starting the power amplifier is
possible when it is operated on mains supply or on 24 VDC emergency power supply.

1 x 400w Remote Control Single Channel Amplifier

(requires input module below) The DPA4140 provides 1 x 400 watts output power.
When used with the NRS90222 module below, the 4140 also provides extensive
system control and monitor functions which support level control, a variety of fault
monitors, and signal routing. The electronically balanced input is provided as an
XLR-type connector (0 dBu). Remote-starting the power amplifier is possible when it
is operated on mains supply or on 24 VDC emergency power supply.

1 x 200w Remote Control Single Channel Amplifier

(requires input module below) The DPA4140 offers the same features as the 4140 above
but with 1 x 200 watts of output power.

DPA4120

DPA4140

23

2 x 600w 2 channel power amplifier DPA4260

Paging Mics Ceiling Speakers EVID

™

Systems System ExamplesProAnnounce

™

Horns and Drivers Surface Mount SpeakersAmplifiers

Input modules

Remote input module for DPA4140 or 4120

Standard input module for DPA4140 or 4120 (Non remote)

NRS90225

NRS90222

ProAnnounce™amplifiers provide an unprecedented level of failure tolerance, recovery and
reporting. Pilot tone monitoring of line impedance is available, as is ground fault monitoring
and over temperature reporting. ProAnnounce

™

amplifiers report status to the DPM4000 PA
controller, which can then seamlessly switch to backup amplifiers and generate user alerts.The
amplifiers are 24 V ready to insure failsafe operation during power outages, and in conjunction
with the DPM4000 PA programming, can go into a very low power consumption quiescent
mode during battery operation,“waking up” only when required for emergency alarms
and announcements.

PROANNOUNCETMSYSTEM

POWER

AMPLIFIERS

Specifications DPA4411 DPA4410 DPA4260 DPA4140 DPA4120
Number of Channels 44211
Maximum Power/Channel 4 ohms: 100, 8 ohms: 50 4 ohms: 100, 8 ohms: 50 4 ohms: 500, 8 ohms: 250 4 ohms: 400, 8 ohms: 200 4 ohms: 196, 8 ohms: 98

(<1% THD, 1kHz) 70 v: 98 70 v: 98 70 v: 500 70 v: 392 70 v: 196
Maximum Bridged Output N/A N/A 4 ohms: 1700, 8 ohms: 1200 N/A N/A

(<1% THD, 1kHz) 70 v: 1160
Slew Rate 25 V/ms 25 V/ms 30 V/ms 30 V/ms 30 V/ms
Total Harmonic Distortion <.1% <.1% <.05% <.05% <.05%
Intermodulation Distortion <.5% <.5% <.08% <.08% <.08%
Crosstalk (@ 1 kHz) <-80 dB <-80 dB <-80 dB N/A N/A
Input Impedance (Balanced) 10 k ohms 10 k ohms 20 k ohms 10 k ohms 10 k ohms
Signal to Noise Ratio(dB-A Weighted) >100 dB >100 dB >100 dB >100 dB >100 dB
Dimensions, in. (mm) 5.2 H x 19.0 W x 13.6 D 5.2 H x 19.0 W x 13.6 D 5.2 H x 19.0 W x 15.2 D 5.2 H x 19.0 W x 13.6D 5.2 H x 19.0 W x 13.6 D

(132 H x 483 W x 345 D) (132 H x 483 W x 345 D) (133 H x 483 W x 386 D) (133 H x 483 W x 386 D) (133 H x 483 W x 386 D)

Net Weight 49.5 lb. (22.5 kg) 49.0 lb. (22.2 kg) 49.6 lb. (22.5 kg) 36.8 lb. (16.7 kg) 29.0 lb. (13.2 kg)

24

ALPHA-NUMERIC
PRODUCT INDEX

AB-34/AB-64 Mounting brackets 5

AB-32/AB-62 Mounting brackets 5

CDP-848AT 30-watt compound diffraction projector 12

CDP-850T 60-watt compound diffraction projector 12

CFID32-T 32-watt paging projector 12

Cobreflex®IIB Folded sectoral horn 11

Cobreflex®III Folded sectoral horn 11

CPS-1 Power amplifier 17

CPS-2 Power amplifier 17

CPS-2t Power amplifier 17

DCS Interface cards 22

DCS400 Digital control system expansion chassis 22

DCS420 Monitor station with speaker 22

DMM4650 Digital message manager 21

DPA4411 4 x 100w 4 channel power amplifier 23

DPA4410 4 x 100w 4 channel power amplifier 23

DPA4260 2 x 600w 2 channel power amplifier 23

DPA4140 1 x 400w remote control single channel amplifier 23

DPA4120 1 x 200w remote control single channel amplifier 23

DPC4510 8 function/10 key paging console 22

DPC4106 6 function paging console 22

DPC4520 8 function/20 key paging console 22

DPC4530 8 function/30 key paging console 22

DPC4550 8 function/50 key paging console 22

DPC4350 50 key expansion station 22

DPM4000 4x4 digital matrix manager CPU 21

DPP4002 Rack mount power supply 21

DPP4004 Rack mount power supply 21

DPP4012 Rack mount power supply 21

DRM4000 8x2 matrix router CPU 21

DTI2000 Telephone interface 22

EVID C4.2 Compact ceiling speaker 6

EVID C8.2 High performance ceiling speaker 6

EVID C8.2HC “High” ceiling speaker system 6

EVID C10.1 Ceiling Subwoofer 6

EVID-6.2 Extended-range high output speaker system 4

EVID-6.2t Extended-range high output speaker system 4

EVID-4.2 Full-range multi-use speaker system 4

EVID-4.2t Full-range multi-use speaker system 4

EVID-3.2 Full-range speaker system 4

EVID-3.2t Full-range speaker system 4

EVID-12.1 Dual input subwoofer 5

EVID-12.1P Dual input subwoofer/300w amp 5

FC100 Compound diffraction projector 11

HS-3 Horizontal EVID tabletop stand 5

IBC8 30-watt reentrant paging

projector/talkback speaker 12

ID30C-16 30-watt driver for reentrant horns 15

ID30C-8 30-watt driver for reentrant horns 15

ID30CT 30-watt driver for reentrant horns 15

ID60DT 60-watt driver for reentrant horns 15

MA-1212 12-input mixer/amplifier 120-watt output 16

Model No. Description Page

EVID

™

Systems Horns and Drivers Paging Mics ProAnnounce

™

System Examples Ceiling Speakers AmplifiersSurface Mount Speakers

25

MA-1206 12-input mixer/amplifier 60-watt output 16

MA-606 6-input mixer/amplifier 60-watt output 16

MIS8C 10-watt paging/talkback projector 13

MM2 25-watt submergence proof speakers 12

MM2F 25-watt submergence proof speakers 12

MM2TC 25-watt submergence proof speakers 12

MP753 11 zone all call mic 18

MP756 11 zone all call mic 18

MP785 3-zone gooseneck mic 19

NC450D PTT noise canceling hand mic 19

NRS series Interface cards 21

PA430 30-watt constant-directivity paging projector 13

PA430T 30-watt constant-directivity paging projector 13

PA60 60-watt reentrant paging projector 13

PRO-8A 8-inch 30-watt two-way speaker 8

PRO-8AT30 8-inch 30-watt two-way speaker 8

PRO-8AT5 8-inch 5-watt two-way speaker 8

RPK-42 Rough-in mounting system 10

RPK-82 Rough-in mounting system 10

RPK-810 Rough-in mounting system 10

RR-42 Rough-in mounting plate 10

RR-82 Rough-in mounting plate 10

RR-810 Rough-in mounting plate 10

S-40B 5.25-inch 160-watt two-way system 7

S-40MBB 5.25-inch 160-watt two-way

system mounting hardware 7

S-40MBW 5.25-inch 160-watt two-way

system mounting hardware 7

S-40TB 5.25-inch 160-watt two-way system 7

S-40TW 5.25-inch 160-watt two-way system 7

S-40W 5.25-inch 160-watt two-way system 7

SR785LN/O Single-zone gooseneck mic 19

SR785L Single-zone gooseneck mic 19

SX-80B 8-inch 175-watt two-way

constant-directivity system 7

SX-80MBB 8-inch 175-watt two-way constant-directivity

system mounting hardware 7

SX-80MBW 8-inch 175-watt two-way constant-directivity

system mounting hardware 7

SX-80PI 8-inch 175-watt two-way

constant-directivity system 7

SX-80PIX 8-inch 175-watt two-way

constant-directivity system 7

SX-80TB 8-inch 175-watt two-way

constant-directivity system 7

SX-80TW 8-inch 175-watt two-way

constant-directivity system 7

SX-80W 8-inch 175-watt two-way

constant-directivity system 7

TC Series EVID terminal covers 5

US600EL PTT hand mic 18

US602FL PTT hand mic 18

US622L Single-zone desktop paging mic 18

US690 Gooseneck microphone 19

UW30 30-watt underwater speaker 13

VS Series Vertical EVID tabletop stand 5

WP300 Wall plate mic 19

WP300S Wall plate mic 19

1407A 75-watt power amplifier 16

1415A 150-watt power amplifier 16

15060 60-watt power amplifier output transformer 17

15075 75-watt power amplifier output transformer 17

15150 150-watt power amplifier output transformer 17

15200 200-watt power amplifier output transformer 17

15300 300-watt power amplifier output transformer 17

15470A 400-watt power amplifier output transformer 17

15600 600-watt power amplifier output transformer 17

15704 4-watt speaker transformers 10

15708 8-watt speaker transformers 10

15716 16-watt speaker transformers 10

15732 32-watt speaker transformers 10

1828C 30-watt driver for compound

diffraction projector 14

1828T 30-watt driver for compound

diffraction projector 14

1829BT 60-watt driver for compound

diffraction projector 14

205-4T 4-inch 4-watt full-range speaker 8

205-8A 4-inch 10-watt full-range speaker 8

205-8T 4-inch 8-watt full-range speaker 8

209-4T 8-inch 4-watt full-range ceiling speaker 9

209-4TWB 8-inch 4-watt full-range ceiling speaker

with grille 9

209-8A 8-inch 10-watt full-range ceiling speaker 9

253 Single-zone paging mic 18

309-4T 8-inch 4-watt ceiling speaker 9

309-4TWB 8-inch 4-watt ceiling speaker

with grille 9

309-8T 8-inch 8-watt ceiling speaker 9

309-8TWB 8-inch 8-watt ceiling speaker

with grille 9

309-8A 8-inch 16-watt ceiling speaker 9

405-4T 4-inch compact 4-watt full-range

high performance speaker 8

405-8H 4-inch compact 8-watt full-range

high performance speaker 8

409-16T 8-inch 16-watt premium speaker 9

409-32T 8-inch 32-watt premium speaker 9

409-8E 8-inch 32-watt premium speaker 9

409-8T 8-inch 8-watt premium speaker 9

5184-E Round back enclosure 10

5184-N Round back enclosure 10

5195-X Round back enclosure 10

5281-W Round grille 10

5295-W Grille assembly 10

7110XC 30-watt explosion proof driver 15

Model No. Description Page Model No. Description Page

AMERICA:

USA: Telex Communications Inc. 12000 Portland Ave South, Burnsville, MN 55337, USA, Phone: [phone], Fax: [phone]
Western Canada: PAG Canada. 23 Hawkesbury Crescent, Winnipeg, MB R3P-1Y6, Canada, Phone: [phone], Fax: [phone]
Eastern Canada: PAG Canada. 728 Eglinton Ave. East, Toronto, ON M4G 2K7, Canada, Phone: [phone], Fax: [phone]
Québec: Acoustik GE Inc. 5715 Kincourt, Montréal, PQ H4W 1Y7, Canada, Phone: [phone], Fax: [phone]
Mexico: Telex Communications de Mexico. Parque Chapultepec 66-201, Naucalpan, Edo. Mex. 53390, Mexico, Phone: [phone], Fax: [phone]
Latin America: Telex Communications Inc. 12000 Portland Ave South, Burnsville, MN 55337, USA, Phone: [phone], Fax: [phone]

EUROPE:

Germany: Telex EVI Audio GmbH. Hirschberger Ring 45, D 94315, Straubing, Germany, Phone: [phone], Fax: [phone]
France: EVI Audio France S.A. Parc de Courcerin, Allée Lech Walesa, F 77185 Lognes, France, Phone: [phone], Fax: [phone]
UK: Telex Communications Ltd. 4, The Willows Centre, Willow Lane, Mitcham, Surrey CR4 4NX, UK, Phone: [phone], Fax: [phone]
Africa &
Middle-East: Telex EVI Audio GmbH. Hirschberger Ring 45, D 94315, Straubing, Germany, Phone: [phone], Fax: [phone]

ASIA & PACIFIC RIM:

Japan: EVI Audio Japan Ltd. 5-3-8 Funabashi, Setagaya-Ku, Tokyo, Japan 156-0055, Phone: [phone], Fax: [phone]
Australia: EVI Audio (Aust) Pty Ltd. Slough Business Estate, Unit 23, Silverwater, N.S.W. 2128, Australia, Phone: [phone], Fax: [phone]
China: EVI Audio (HK) Ltd. Unit E & F, 21F, Luk Hop Industrial Bldg., 8 Luk Hop St., San PO Kong, Kowloon, Phone: [phone], Fax: [phone]
Singapore: Telex Pte. Ltd. 3015A Ubi Road 1, 05-10 Kampong Ubi Industrial Estate, Singapore 408705, Phone: [phone], Fax: [phone]

www.electrovoice.com • www.telex.com

© 2003 Telex Communications, Inc. 02/2003 PA 20532-2

All trademarks are the property of their respective owners. All specifications subject to change without notice.

Step Up To Electro-Voice

®