Cobalt
™
WIRED
Co
11
Condenser Vocal Microphone
MICROPHONES
Key Features:
• Versatile condenser microphone, ideal
for both vocals and instruments
• Cardioid polar pattern with excellent
feedback rejection and acoustic
isolation
• High compliance shock mount
effectively eliminates handling noise
• Multistage pop filter eliminates breath
pop noises
tm
• Memrafle
x
hardened grille screen
General Description:
The new Co11 is a high quality hand held condenser
microphone that offers extended frequency response
and wide dynamic range. The Co11 is the ideal vocal
microphone for anyone that appreciates the crisp high
end and warm proximity effect that can only come from
a top performing condenser microphone. Besides great
sound, the Co11 features a high compliance shock
mount that makes handling noise “go away”, and comes
in a rugged die cast housing with the famous EV
Memraflextm dent resistant grille screen. Best of all, the
Co11 does all this at a price anyone can afford!
Cobalt
™
Co
11
Condenser Vocal Microphone
Warranty
Telex/EV wired microphones are guaranteed against
malfunction from any cause for a period of one (1) year
from the date of original purchase.This limited war
ranty
does not cover cables,cable connectors,or switches.If
your Telex/EV product fails within this period,contact
our Technical Assistance group at 1-800-392-3497or toll
free at 1-800-685-2606 for details on repair,replacement,
or refund.For customers outside the U.S.,please call the
number listed in the bottom left column of this document.
Element Self-Biased Condenser
Frequency Response 50 Hz to 20 kHz
Polar Pattern Cardioid
Impedance Low-Z balanced (250 Ohms)
Sensitivity
Open Circuit Voltage 4.0 mV/PA (-48 dBV) re 1 Pa*
Microphone Connector 3-pin, XLR-type
Polarity Pin 2 positive, referenced to pin 3
with positive pressure on diaphragm
Finish/Materials
Dimensions
Length 6.8 in. (173 mm)
Diameter 2.1 in. (53 mm)
Shank .80 in. (20 mm)
Weight, Net
Accessories included Stand adaptor (black) and Gig bag
Clipping Level
, 1KHz
-3 dBV
139 dB SPL (1% THD)
Self-Noise
Dynamic Range, (Maximum SPL
to A Weighted noise level)
positive at pins 2 & 3, Current Drain: Up to 10 mA
Phantom Supply Requirement: 24 to 48 Vdc,
Durable Polyurethane painted, die cast zinc
Signal-to-Noise Ratio
68 dB (@ 94 dB SPL)
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 4/2002
Part Number 38110-129 Rev A
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.