Electro-Voice C07 EDS User Manual

COBALT

™

WIRED

MICROPHONES

General Product Description

The Co7 is the perfect choice for the performer who wants
hassle free sound – a mic that performs in high volume
situations without feedback. Built to the same standards of
EV’s N/DYM microphones, this mic’s low handling noise
also makes it ideal in critical acoustic settings.

Microphone Use and Placement

Please note that miking techniques are a matter of personal
preference. These are merely guidelines to assist in the
placement of the microphone to gain optimal performance.

Usage Optimal Placement

Vocals

Zero to six inches from the windscreen,
and on axis with the microphone.

Spoken Word Five to ten inches from the windscreen,

and on axis with microphone

Standard Placement & Use Guidelines

1. Always point the microphone at the desired source of
sound, and away from any unwanted sources.

2.The microphone should be located close to the sound
source to minimize interference from other potential
sound sources.

3. Use the 3-to-1 rule when using multiple microphones.
Place each microphone three times farther from other
microphones as from the desired sound source.

4. Minimize over-handling of the microphone to reduce
unwanted mechanical noise.

5.Working close to the microphone will increase the bass
tone and also provide increased gain-before-feedback.

Cobalt™Co

7

Crossroads Vocal Microphone

www.electrovoice.com •Telex Communications, Inc.•www.telex.com

©Telex Communications, Inc. 12/2000 Part Number 38109-895

Cobalt™Co

7

Crossroads Vocal Microphone

Warranty

Telex/EV wired microphones are guaranteed against
malfunction from any cause for a period of one (1) year
from the date of original purchase.This limited warranty
does not cover cables, cable connectors, or switches. If
your Telex/EV product fails within this period, contact
our Technical Assistance group at 1-800-392-3497 or toll
free at 1-800-685-2606 for details on repair, replacement,
or refund. For customers outside the U.S., please call the
number listed in the bottom left column of this document.

USA 12000 Portland Ave South, Burnsville, MN 55337, Phone: [phone], FAX: [phone]
Canada 705 Progress Avenue, Unit 46, Scarborough, Ontario, Canada, M1H2X1, Phone: [phone], FAX: [phone]
Switzerland Keltenstrasse 11, CH-2563 IPSACH, Switzerland, Phone: [phone], FAX: [phone]
Germany Hirschberger Ring 45, D94315, Straubing, Germany, Phone: [phone], Fax: [phone]
France Parc de Courcerin, Allee Lech Walesa, Lognes, 77185 Marne La Vallee, France, Phone: [phone], FAX: [phone]
Australia Unit 23, Block C, Slough Business Park, Slough Avenue, Silverwater, N.S.W. 2128, Australia, Phone: [phone], FAX: [phone]
Hong Kong Unit E & F, 21/F, Luk Hop Industrial Bldg., 8 Luk Hop St., San PO Kong, Kowloon, Hong Kong, Phone: [phone], FAX: [phone]
Japan 2-5-60 Izumi, Suginami-ku, Tokyo, Japan 168, Phone: [phone], FAX: [phone]
Singapore 3015A Ubi Rd 1, 05-10, Kampong Ubi Industrial Estate, Singapore 408705, Phone: [phone], FAX: [phone]
Mexico Av. Parque Chapultepec #66-201, Col. El. Parque Edo. Mex. 53390, Phone: [phone], FAX: [phone]
UK 4, The Willows Centre,Willow Lane, Mitcham, Surrey CR4 4NX, UK, Phone: [phone], FAX: [phone]
Africa, Mid-East 12000 Portland Ave South, Burnsville, MN 55337, Phone: [phone], FAX: [phone]
Latin America 12000 Portland Ave South, Burnsville, MN 55337, Phone: [phone], FAX: [phone]

U.S.A. and Canada only.

For customer orders, contact the Customer Service department at

800/392-3497 Fax: [phone]

For warranty repair or service information, contact the Service

Repair department at 800/685-2606

For technical assistance, contact Technical Support at 800/392-3497

Specifications subject to change without notice.

Designed in the U.S.A. Made in Taiwan.

Specifications

Element Dynamic

Neodymium magnet structure

Frequency Response 50 Hz to 18 kHz

Polar Pattern Cardioid

Impedance Low-Z balanced (600 Ohms)

Sensitivity

Open Circuit Voltage 3.2 mV/PA (-50 dBV) re 1 Pa*

1 Pa = 94 dB SPL

Microphone Connector 3-pin, XLR-type

Polarity Pin 2 positive, referenced to pin 3

with positive pressure on diaphragm

Finish Durable polyurethane paint

Materials Die cast zinc housing

Dimensions

Length 6.7 in. (170 mm)
Diameter 2.1 in. (53 mm)
Shank .85 in. (22 mm)

Weight

Net 11.7 oz. (332 grams)
Shipping 29.8 oz. (845 grams)

Accessories included Stand adaptor (black)

Gig bag

Step up to Electro-Voice

®