Electro-Voice 920-8B Data Sheet

Key Features:

••

• High 100 dB Sensitivity

••

••

• Wide, Smooth 90 Hz - 18 kHz Frequency

••

Response

••

• High Power Handling, 200W

••

••

• Durable Cast Frame

••

••

• High Output Dome Tweeter

••

••

• 4 Pin Quick Disconnect Phoenix

••

Connector

••

• Rear Transf ormer Mounting Holes

••

••

• Front or Rear Baffle Installation

••

Capability

920-8B

12” Two-Way,

Full-Range

T ransducer

General Description:

The 920-8B loudspeaker system is a two-way
loudspeaker with a 12.0-in. (30.5 cm) low frequency
cone and high temperature voice-coil assembly
coaxially mounted with a wide-dispersion dome
radiator tweeter. The 920-8B utilizes a dual-section
crossover network, centered at 2500 Hz that provides
12 dB/Octave of attenuation for each element outside
its operating range. Clear , intelligible speech and fine
music reproduction are ensured by the extended 90
Hz to 18 kHz frequency response.

Mounting holes are provided on the rear of the woofer
magnet to mount a transformer to operate the
loudspeaker from 70.7/100V distribution lines. The
920-8B’s frame also allows the loudspeaker to be front­or rear-mounted.

The 920-8B is equipped with a 4 pin phoenix-style
connector which enables easy pass-through wiring of
up to 12 gauge wire. This allows for quick and secure
hookups and long-term reliable operation.

The 920-8B is the ideal loudspeaker when a
high-efficiency, wide-dispersion, easily mounted, full
range loudspeaker is required for in-ceiling or in-wall
installations.

Technical Specifications:

1

esnopseRycneuqerF

:)Bd3-(zHk81otzH09

1

1

Half Space Measurements

egnaRycneuqerF

:)Bd01-(zHk02otzH05
:ycneuqerFssaphgiH.ceRzH06
:ytivitisneSlaixABd001
:LPSdetaluclaCxaMBd821
:gnildnaHrewoPkaePW008,.tnoCW002
:ycneuqerFrevossorCzHk2
:slanimreTtupnIrotcennoCepyT-xineohPnip-4
:ecnadepmIsmhO0.8lanimoN
:snoisnemiDhtpeDmm721x.aiDmm113

:thgieWteN).sbI5.31(gk2.6
:thgieWgnippihS).sbI2.61(gk4.7

)htpeD"0.5x.aiD"52.21(

Architects’ and Engineers’ Specifications

The loudspeaker shall be coaxial with a 12.0-in. (30.5 cm)
low-frequency cone and a high temperature voice coil assembly
coaxially mounted with a wide dispersion dome radiator tweeter. The
loudspeaker shall meet the following criteria: AES power rating shall
be 200 watts of band limited pink noise (90 Hz to 18 kHz, 6 dB crest
factor). Frequency response, uniform from 90 Hz to 18 kHz. Pressure
sensitivity, 100 dB SPL at 1 meter on axis with one watt of band-limited
pink noise from 500 Hz to 3 kHz (ref. 20 ìpa). Minimum impedance,

5.2 ohms. The voice coils shall be LF 2.0 inches (5.1 cm) and HF -

1.5 inches (3.8 cm) in diameter, driven by ferrite magnets. The
loudspeaker shall be 12.3 inches (31.2 cm) in diameter and 5.0 inches
(12.7 cm) deep. The weight shall be 13.5 lbs. (6.2 kg). The loudspeaker
shall be the Electro-Voice

®

model 920-8B.

Dimension Drawings:

Frequency Response:

110

100

90

Sensitivity (dB)

80

Frequency (Hz)

Beamwidth:

360

100

20

Half Space
Impedance

316

100

Impedance (Ohms)

10

3.1670

200001000010001005020

Front

Side

-6dB Beamwidth (degrees)

3.6

Freque ncy (Hz)

Horizontal Vertical

Directivity:

30

20

10

Directivity Index (DI), dB

0

20 100 1000 10000 20000

Frequency (Hz)

920-8B Part Number

• 301922-100 920-8B, 12” Coaxial Woofer

Performance Match

• D170180 CPS-2T Power Amplifier, 2 x 600W, Output

• 500577-000 MA1212 Mixer Amplifier, 120W

• D170263 CPS 2.4 Power Amplifier, 2 x 400W

Accessories

• 1888-3711 TM60 Transformer, 60W

Transformer

2000010000100010020

1000

100

10

Directivity Factor (Q)

1

Rear

12000 Portland Avenue South, Burnsville, MN 55337
Phone: [phone], Fax: [phone]

www.electrovoice.com

© Telex Communications, Inc. 1/2006

Part Number 38109-865 Rev B

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: [phone]

Europe, Africa, and Middle East only . For customer orders, cont act Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265

Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 887-9212

For warranty repair or service information, contact the Service Repair department at:

800/685-2606

For technical assistance, contact Technical Support at: 866/78A UDIO

Specifications subject to change without notice.