Electro-Voice 200M User Manual

Specifications and Main Features

Inputs 1 Through 8:
Mic/line input without a transformer
Control of gain
Indicators in clip mode
Monitor send section
Effect send section
Parametric equalizer with three-bands, middle range shiftable
Input 9:
Auxiliary Ports available for high impedance or line level devices.
Monitor send layout
Master section:
Built-in 30 programs lexicon 16 digital effect processor
Two Constant Range™ nine-band graphic equalizer with minimal interband coupling
Two ten segment peak responding bar graph meters
40V decentralised power supply for a condenser mic
Master control for mono output
Patching connectors for mixer, equaliser, and amplifiers
Effects send and return system for giving external effects
Power Amplier Section:
Two class AD amplifiers with high switching power
Use of a Compressor to stop clipping distortion
Switcher for power amplifier assigning for the usual stereo mode and mono mode with the aids of loudspeakers.
Specifications:
POWER OUTPUT: 300 W/per channel with 4ohm load; 200 W/per channel with 8 ohm load
FREQUENCY RESPONSE: 20Hz - 20KHz +/-1dB with 4 ohm loaded
THD: <1% at maximum rated power with 4 to 8 ohm loads
NOISE LEVEL: -123 dBu, input noise EN-equivalent of, microphone input with a termination of 150 ohm
INPUT CHANNEL EQUALIZATION: Band: 15 dB low boost/cut centered at 90 Hz, 12 dB mid boost/cut with full toggle range of 300 Hz to 5 kHz、 plus 15 dB high boost/cut around 10 kHz
EFFECTS PROCESSOR: Two-channel recorder, 16 bits, sub-band of 15 kHz, 30 programs which can be selected by the user
DIMENSIONS: Height: 7.94 in. (20.2 cm), depth 18.25 (46.4 cm), width 19.5 in (49.5 cm)
WEIGHT: 38 lb (17.3 kg)
POWER REQUIREMENTS: 100/120/220/240 V ac, 50/60 Hz (by the switching device inside)
CASE: Black polyethylene with a plug-in line cord
OPTIONAL ACCESSORIES: EPS200M bag, S-200 equaliser, S-200 speakers

---

Frequently Asked Questions

Q1: With the 200M Entertainer Mixer, what kind of microphones should I use? Are both low impedance and high impedance microphones compatible with this specific mixer?

You will be able to use low impedance dynamic microphones, high impedance microphones and even condensing microphones as long as they are compatible with phantom power.

Q2: Can any effects be used or applied through the Mixer?

It has a lexicon 16 bit digital effects with 30 types of built in effects programs.

Q3: How many input channels does the 200M Entertainer Mixer have?

There are a total of nine input channels available on the mixer.

Q4: What’s the highest power rating of the amplifier?

The maximum power of the amplifier totals 300 watts per channel at 4 Ω and around 200 watts per channel at 8 Ω.

Q5: Can I use a condenser microphone with the phantom power feature?

The mixer comes integrated with a 40-volt phantom power that is great for condenser microphones.

Q6: I want to use external effects processors, how do I do this?

You can connect external effects processors through the 200M using the Effects Send and Return connections.

Q7: I want to know the size of the compact mixer.

The dimensions are 7.94 inches in height, 18.25 inches in depth, and 19.5 inches in width.

Q8: How heavy is the 200M Entertainer Mixer?

The Entertainer Mixer weights approximately 38 pounds (17.3 kg).

Q9: Does the 200M have a stereo and mono switch that will enable me to operate in both modes?

Certainly, the power amplifier assign switch gives you the flexibility to use and change between regular stereo usage and mono usage with the monitors.