Electro-voice 1824S specification and instructions

General Product Description
The 1824S is a heavy-duty driver designed for use in fixed or mobile siren warning systems incorporating PA horns.
The driver uses a rugged, weather-resistant phenolic diaphragm, 2-inch diameter voice coil with specially insulated copper wire, and a strontium ferrite magnet structure.
The entire voice coil and diaphragm assembly is held to absolute concentricity by use of specialized techniques in construction.
Automotive-type terminals are used, and mating connectors provided for making electrical connection to the 1824S.
Architects’ and Engineers’ Specifications
The loudspeaker shall be of the compression-driver type having a rugged phenolic diaphragm and a high-temperature rated 2.0-inch diameter voice coil.
The loudspeaker shall exhibit essentially flat power response from 300 to 3,000 Hz with a smoothly rolled-off response beyond. Its sensitivity, when mounted on a University Sound Cobreflex III horn, will be 107 dB (1 W/1 m) with a 300 to 3,000 Hz pink noise signal applied.
The loudspeaker shall be capable of handling a 75 watt, 500 to 5,000 Hz pink noise signal with a 6 dB crest factor for a period of eight hours.
1824S
Heavy Duty Driver
COMMER CIAL
The loudspeaker shall have a diameter of 13.2 cm (5.2 in.) and a depth of 7.9 cm (3.1 in.). It shall have a 2.2 cm (0.9 in.) throat opening with a 1 3/8 inch-18 thread for mounting.
The loudspeaker shall be the 1824S which weighs no more than 2.9 kg (6.4 lb) and has a nominal impedance of 8 ohms.
Specifications:
Frequency Response:
............................................... 300-3,000 Hz ±5 dB (see Figure 2)
Power Handling, 8 Hours, 6 dB Crest Factor:
.............................................. 75 watts: (500-5,000 Hz pink noise)
Impedance, Nominal: ........................................................ 8 ohms
Minimum: ............................ 7 ohms (Cobreflex III horn)
Sound Pressure Level at 1 Meter, 1 Watt Input Averaged, Pink Noise Band-Limited from 300-3,000 Hz:
.......................................................... 107 dB (Cobreflex III horn)
Voice Coil Diameter:
............................................................................. 5.08 cm (2.0 in.)
Magnet Weight:
................................................................................. 0.6 kg (1.4 lb)
Magnet Material:
............................................................................. Strontium ferrite
Flux Density:
...................................................................................... 1.25 Tesla
Construction:
Diecast front cover with thermal black finish
Mechanical Construction of Driver:
1-3/8"-18 x 7/8”- long thread for direct connection to PA or reentrant horns.
Dimensions,
Diameter: ..................................................... 13.2 cm (5.2 in.)
Depth: ............................................................ 7.9 cm (3.1 in.)
Net Weight:
......................................................................... 2.9 kg (6.4 lb)
Shipping Weight:
......................................................................... 3.2 kg (7.0 lb)
Recommended Horns:
Cobreflex IIB Cobreflex III
Installation
Remove the plastic cap from the threaded throat of the driver and screw driver into the horn until firmly seated.
Install the horn/driver assembly in intended location, referring to the instructions provided with horn.
A rear driver bolt is provided for attachment. Do not use a longer size than the one supplied.
Attach mating terminals to lead wire and connect to driver terminals or solder lead wire directly to the driver terminals.
Figure 1.
Distortion Response - Plane Wave Tube (1 inch)
(7.5 watt input)
Figure 3.
Impedance Response - Plane Wave Tube
(1 inch)
USA 12000 Portland Ave South, Burnsville, MN 55337, Phone: 952-884-4051, FAX: 952-884-0043 Canada 705 Progress Avenue, Unit 46,Scarborough, Ontario, Canada, M1H2X1,Phone: 416-431-4975, 800-881-1685, FAX: 416-431-4588 Switzerland Keltenstrasse 11, CH-2563 IPSACH, Switzerland, Phone: 41/32-331-6833. FAX: 41/32-331-1221 Germany Hirschberger Ring 45, D94315, Straubing, Germany, Phone: 49 9421-706 392, FAX: 49 9421-706 287 France Parc de Courcerin, Alle Lech Walesa, Lognes, 77185 Marne La Vallee, France, Phone: 33/1-6480-0090, FAX: 33/1-6480-4538 Australia Unit 23, Block C, Slough Business Park, Slough Avenue, Silverwater, N.S.W. 2128, Australia, Phone: 61/2-9648-3455, FAX: 61/2-9648-5585 Hong Kong Unit E & F, 21/F, Luk Hop Industrial Bldg., 8 Luk Hop St., San PO Kong, Kowloon, Hong Kong, Phone: 852-2351-3628, FAX: 852-2351-3329 Japan 2-5-60 Izumi, Suginami-ku,Tokyo, Japan 168, Phone: 81-3-3325-7900, FAX:81-3-3325-7789 Singapore 3015A Ubi Rd 1, 05-10, Kampong Ubi Industrial Estate, Singapore 408705, Phone: 65-746-8760, FAX: 65-746-1206 Mexico Av. Parque Chapultepec #66-201, Col. EI. Parque Edo. Mex. 53390, Phone: (52) 5358-5434, FAX: (52) 5358-5588 UK 4, The Willows Centre, Willow Lane, Mitcham, Surrey CR4 4NX, UK, Phone: 44 181 640 9600, FAX: 44 181 646 7084 Africa, Mid-East 12000 Portland Ave South, Burnsville, MN 55337, Phone: 952-887-7424, FAX: 952-887-9212 Latin America 12000 Portland Ave South, Burnsville, MN 55337, Phone: 952-887-7491, FAX: 952-887-9212
www.electrovoice.com • Telex Communications, Inc. • www.telex.com
© Telex Communications, Inc. 02/2001
Part Number 38109-850 Rev A
Figure 2.
Distortion Response - Cobreflex III Horn
(1 watt / 1 meter)
Figure 4.
Impedance Response - Cobreflex III Horn
For customer orders, contact the Customer Service department at
For warranty repair or service information, contact the Service
For technical assistance, contact Technical Support at 1(866)78 AUDIO
Please refer to the Engineer ing Data Sheet for warranty information.
Specifications subject to change without notice.
U.S.A. and Canada only.
800/392-3497 Fax: 800/955-6831
Repair department at 800/685-2606
Loading...