Electrothermal AZ9046, AZ6741, AZ6705, AZ6706 Data Sheet

CONTROLLERS

CONTROLLERS

CONTROLLERSCONTROLLERS

Specifications of temperature probes for use with the MC810B Digital controller

•

Introduction

The MC810B Digital Heating Controller provides a convenient means of temperature control, utilising a digital display and microprocessors
to provide easy operation and accurate readings. Temperature sensing is performed by a plug-in platinum resistance probe. The MC810B
is supplied with a PTFE-covered platinum resistance probe (AZ6705) for measurements up to 250°C and alternative probes are available
for measurements up to 800°C. The sections below give the specifications of each of the available temperature probes.

•

Summary table

Part code

AZ6705 250°C PT100, 4-wire, Class A Stainless steel with PTFE sleeving 5.0 x 260mm

Maximum
temperature

Sensor type Material

Dimensions
(ø x length)

AZ9046 250°C PT100, 2-wire, Class A Uncoated stainless steel 6.0 x 380mm

AZ6706 400°C PT100, 2-wire, Class A Uncoated stainless steel 5.0 x 280mm

AZ6741 800°C PT100, 2-wire, Class B Stainless steel with porcelain sheath 7.0 x 140mm

Class A sensors = +/- 0.15°C

Class B sensors = +/- 0.3°C

Please note these figures are for the accuracy of the sensors only. When used as part of a system (i.e. When connected to the MC810B)
the accuracy of the ‘system’ will most likely be slightly less.

[e-mail] | Tel: [phone] | 03/2017

Specifications of temperature probes

•

AZ6705

PTFE coated stainless steel temperature probe for measurements up to 250°C.

[e-mail] | Tel: [phone] | 03/2017