Electro Therapy Devices ETDFL Instruction Book

ETDFL MAT + BELT

INSTRUCTION BOOK

English

© August / 2017 - © 2018

2

Index page 2
Introduction page 3

. Introduction to Electrotherapy page 4
Technical Description: ETDFL MAT & BELT Page 5
. HOOKING UP ETDFL MAT: page 6

. ETDFL MAT: Bed Mat Method: page 7
. ETDFL MAT: Body Wrap Method, & Extension page 8
. Body Wrap, Best Voltage Settings page 9
.
ETDFL BELT: Wrap Methods page 10

. ETDFL Head-Belt Forehead Method page 10
. ETDFL CHIN / MOUTH / UPPER NECK Method page 11
. ETDFL FULL NECK Belt Method page 12
. ETDFL Leg-Belt Wrap Method page 13
. ETDFL Arm-Belt Wrap Method page 14

FAQ Page 15-16
Warranty & Disclaimer Page 17
ABOUT ETDFL Page 18
World Sales and Service Centers Page 19

3

Introduction:

Congratulations on your purchase of your ETDFL Series Healing MAT
or ETDFL Healing Belt, also known as Dr Rife Healing Mat, and Dr Rife
Healing Belt.

Since 2016, the ETDFL MAT and ETDFL Belt have been used by
thousands of people with Electro Therapy Devices, to transmit the
Healing Frequencies to specific parts of the body.

The New Design 2017-2018 ETDFL Mats use advanced 3M conductive
rubber technologies built into a body wrap mat, which can now allow
your mat to be affixed to any area of the body. The 3M Rubber is a
safe and hygienic property, and can be easily cleaned for multiple
users.

ETDFL Recommend you only use the Rife Digital
Professional V2 (19v) * and Zapper Digital Professional V2
(19v) * with the ETDFL Mat/Belt

However, The ETDFL Mat & Belt are also compatible with:

Rife Digital Professional Series 1 (16v)
Rife Digital Ultimate Series 1 (16v)
Rife Digital Ultimate TRIO (16v)
Zapper Digital Professional Series 1 (16v)
Zapper Digital Ultra Series 1 (16v)
Zapper Digital Ultra TRIO (16v)
Dr Bob Beck Professional Machine

* Note: The ETDFL Mat and ETDFL Belt are designed for direct
use with

* Rife Digital Professional V2 (19v)
* Zapper Digital Professional V2 (19v)

The V2 Series have voltage adjustment which allows you to use the
ETDFL Mat/Belt directly against the skin/body. Direct contact provides
the most efficient use of the ETDFL Mat technology.

4

Introduction to Electrotherapy with ETDFL Mat, and Belt

The following guide provides an introduction to Electrotherapy and
recommendations for the use of your Mat or Belt with your Electro
Therapy Device (ETD).

CAUTION:

. Read this brochure carefully and use your Mat or Belt

exactly as directed!

Basics:
What is electrotherapy Mat / Belt treatment with the ETD for?



Use the ETDFL Healing Mat on any larger area of the body

(e.g. Stomach, Chest, Back to focus the electrotherapy at those
precise areas for more effective transmission of frequencies



Use the thinner, compact ETDFL Healing Belt around the Head,

Neck, Arm or Leg, for treatment of smaller areas.



Use electrotherapy to fight certain viruses, bacteria, parasites,

etc. The electrotherapy works in a similar way as Homeopathy:
using natural principles to heal the body. Everything around us
already has an electrical charge and thus a certain electrical
frequency - we are always and everywhere exposed to it. If you
have a specific virus, it lives in a given frequency field. Let us
assume for simplicity it lived only at one single electrical
frequency. When you feed the same frequency generated by an
ETD to your body (with very particular waves), the virus gets
over-stimulated and dies.



Use electrotherapy to restore vitality and health: The programs

are producing a harmonic resonance in the body. Each
symptom brings electric dissonance in the organism. With the
more general programs such as back pain, detoxification
programs for lung, liver, etc., the dissonance in the body will be
transformed into harmonic resonance. Such programs are
particularly useful for meridian treatments connected with 4
strap-combinations.



Use electrotherapy for Detoxification. Detoxify Heavy Metals,

Chemicals and other unwanted toxins in the organs



Use electrotherapy for the treatment of all disease Conditions

5

Technical Description: ETDFL MAT & BELT

Frequency range
Tested

0:01 Hz - 50 MHz

Frequency Wave and Sideband

Transmits all ETDFL frequencies with +99%† conductivity to the
body on the RDP-V2* and ZDP-V2* machines. All Dr Rife MOR
Carrier Wave and RF frequencies are reproduced through the
Positive and Grounded areas of the Mat and Belt with +99%†
efficiency.

Voltage input

Set your RFP-V2* / ZDP-V2* onto Voltage Level 12.5v DC.
Only at these lower voltages can you use the mat, or the belt
directly against the skin. If the frequency output is too intense,
then you can use a t-shirt between the Mat and your body.
Should you feel to increase voltage, do this one step at a time,
move to 14.5v and then 17.5v. If any sensitivity is noticed, then
switch voltage down.

- Note: All other models (16v) will require a T-shirt between
the mat and body as there are no voltage adjustments on
First Series Rife Machine, and TRIO series

Clinic Use, and Cleaning

If using the Mat or Belt for multiple people, or for a clinic, wipe
down the rubber area after use with a mild detergent. Do not use
alcohol directly on the rubber. You cannot wash the mat in a
washing machine, as this will affect the 3M Conductive Rubber
surface, You can wash by hand in warm water with a little
laundry liquid, however it is suggested to only use a mild
detergent "wipe down" method directly on the dry mat.

* (RDP-V2) Rife Digital Professional V2 2018 Series.
* (ZDP-V2) Zapper Digital Professional V2 2018 Series.
† 99% Conductivity Relative to Copper/Gold at 100%

6

HOOKING UP ETDFL MAT:

Locate your "Leads" in your Rife Machine Bag, They are white in
color with 2 Buttons, Red and Black

Plug your power into the Red socket of machine, and
RUN/SWEEP your Program. Now Plug the Leads into One of
the Yellow Sockets. If using 2 mats then insert 2 sets of
leads.