INSTRUCTION MANUAL
CAT. 64401-10, 64401-50 Tall Slanted Shelf Cart
1
1560 Industry Road Hatfield, PA 19440
TEL: 215-412-8400 FAX: 215-412-8450 TOLL FREE: 1-800-523-5874
EMAIL: sgkcck@aol.com WEB: www.emsdiasum.com
Electron Microscopy Sciences
x1
Cart
x1
Cart Top
x4
E.
Cap Nut
The main pieces of the cart come
nested together. Remove the middle
shelf “C” from the right side of the cart
base “A” and set aside.
Lift the cart top “B” out from inside the
cart base “A”.
x1
x4
C. Middle Shelf
D. Cap screw
Thank you for choosing Electron Microscopy Sciences for your storage and
organizational needs! This guide will show you step by step how to assemble your Tall
Slanted Shelf Cart.
INCLUDED COMPONENTS
UNPACKING THE CART
2
TEL: 215-412-8400 FAX: 215-412-8450 TOLL FREE: 1-800-523-5874
EMAIL: sgkcck@aol.com WEB: www.emsdiasum.com
Electron Microscopy Sciences
1560 Industry Road Hatfield, PA 19440
3
Lay the middle shelf “C”
with long tabs facing up into
the grooves on the inside of
the cart base “A”. They will
pop into place.
Next place the cart top “B”
inside the cart base “A”. The
cart top should rest on top of
the middle shelf “C” installed
in the last step.
Insert the cap nut “E” through the holes in the cart base “A”
and cart top “B” as shown above. Tighten the cap screw “D”
into the cap nut “E”. Repeat with all four holes.
Electron Microscopy Sciences
1560 Industry Road Hatfield, PA 19440
TEL: 215-412-8400 FAX: 215-412-8450 TOLL FREE: 1-800-523-5874
EMAIL: sgkcck@aol.com WEB: www.emsdiasum.com
Loading...