Electronics Tomorrow A61000515 User Manual
Instruction Manual
Bluetooth Thermometer Logger Pro
Main Unit
Location of Control
1. Power On/Off
2. Pair
3. Reset
4. Temperature Probe
5. Battery Compartment
6. Battery Door
4
3
2
5
16
Features
Thanks you for purchasing the BTL - Pro. This product is
designed as a BTL- Pro by working with Ipad, Iphone , IPod
or other IOS devices.
• Support IOS version 7.1 or above
• Support Bluetooth version 4.0.
• Fahrenheit / Celsius reading.
• Operating temperature from 0°C to 50°C
• Temperature measuring range from -40°C to 250°C
• Temperature display with logging up to 14000 data and
graphical display in app
Before you start using it
• Please make sure to read the instruction manual carefully.
• Following and respecting the instructions in your manual
will prevent damage to your instrument and loss of your
statutory rights arising from defects due to incorrect use.
• We shall not be liable for any damage occurring as a
result of non-following of these instructions. Likewise, we
take no responsibility for any incorrect readings and for
any consequences which may result from them.
• Please take particular note of the safety advice!
• Please keep this instruction manual for future reference.
Getting started
1. Install battery:
1.1 Re-tight the screw and open the battery door.
1.2 Insert AAA x 2 batteries in polarity (+) and (-) as
indicated.
1.3 Close the battery Door and tighten the screw.
30
2. Install BTL App on your device.
2.1 Access App Store and search for “BTL”.
2.2 Select and install BTL into your device.
20
10
Pairing the BTL Pro
3. Pair the BTL Pro with the BTL app.
3.1 Before running the BTL app, make sure the Bluetooth in
turned ON at your I-device.
3.2 After you tap the app icon , the ‘Nearby Devices’
screen appears.
You need to pair the BTL- Pro device before you enter the
main app screen.
30
20
10
Pairing the BTL Pro
3.3 Press the “Pair” button of the BTL Pro.
The new BTL_XXXX will be displayed on the App
“Pair New Device’, it is ready for Pairing.
Tap the BTL_XXXX will start the pairing and connection
process. The BTL Pro will BI-BI sound.
Once the BTL-Pro is paired. It will show on Paired Device.
3.4 Tap the BTL_XXXX at Paired device, which you want to
connect to i-device.
3.5 App will ask you to setting the new parameter or use the
Pervious setting (When open at second times).
Loading...