Electronics Tomorrow A60000515 User Manual

Instruction Manual

Bluetooth Alarm Clock

with temperature and humidity sensor

Main Unit

Location of Control

1. Snooze button

2. Alarm

3. Pair

4. Scroll

5. Reset

6. Battery
Compartment

7. Battery door

8. Stand

SCROLL

PAIR

1.5V''AA''

RESET

1.5V''AA''

7

3

4

6

1

5

2

8

Features

Thank you for purchasing the BLE Alarm Clock. This
product is designed as a BLE Alarm Clock by working with
your mobile devices.

- Support Bluetooth version 4.0.

- Set wake up buzzer alarm with snooze function, up to 5
alarms.

- Take full control of the BLE Alarm Clock with device app
via Bluetooth Low Energy.

- Selectable alarm tone pattern and volume to different
alarms.

- Temperature and Humidity reading whith history chart

- History chart that can be read on App without alarm clock
connection

- Set count down timer.

- Monitor the battery status of the BLE Alarm Clock and
have battery warning if it is at low level.

- Can stop alarm via App

- Wall mounting or desk stand

Before you start using it

• Please make sure to read the instruction manual carefully.

• Following and respecting the instructions in your manual
will prevent damage to your instrument and loss of your
statutory rights arising from defects due to incorrect use.

• We shall not be liable for any damage occurring as a
result of non-following of these instructions. Likewise, we
take no responsibility for any incorrect readings and for
any consequences which may result from them.

• Please take particular note of the safety advice!

• Please keep this instruction manual for future reference.

Getting started

1. Install battery

1.1 Open the battery compartment.

1.2 Insert 2 x AA batteries in polarity (+) and
(-) as indicated.

1.3 Close the battery compartment.

SCROLL

PAIR

RESET

1.5V''AA''1.5V''AA''

2. Install BleAlarm App on your device.

2.1 Access App Store and
for BleAlarm .

2.2 Select and install BleAlarm App on your

mobile device.

BLE

ALARM

Google play search

Pairing the BLE Alarm Clock

3. Pair the BLE Alarm Clock with BleAlarm app.

3.1 Before running the BleAlarm app, make sure the
Bluetooth is turned ON at your device.

BLE

3.2 After you tap the app icon , the ‘Nearby Devices’
screen appears. You need to pair the BLE Alarm Clock
device before you enter the main app screen.

ALARM

Pairing the BLE Alarm Clock

BLE Alarm Clock

3.3 Tap “ Pair New Device”
to search for nearby
devices.

3.4 Press and hold the [PAIR]
button on the BLE Alarm
Clock device for 5 seconds.
You can find that the

icon start to blink.

3.5 The new BLE Alarm Clock
will be displayed on App
and is ready for pairing. Tap
the "BLE Alarm Clock" will
start the pairing and
connection process. Once
the BLE Alarm Clock is
paired, it will start time and
data synchronization.

Pairing the BLE Alarm Clock

3.6 After the connection is made, the following information
will be synchronized:
i) Current time and date
ii) Alarms & timer setting
iii) Unit battery level
iv) Temperature and Humidity history

Pairing the BLE Alarm Clock

3.7 When the BLE Alarm Clock is paired with one device,
other devices cannot pair with it again.

3.8 One device can pair with maximum 5 BLE Alarm
clocks.

3.9 Bluetooth icon status description

No Bluetooth
connection

Bluetooth under
connection

Bluetooth connected
successfully

Rename the BLE Alarm Clock

4. Rename the device.
Tap the device name (default is “BLE Alarm Clock”) at
the top of the screen to edit the device name.

Battery status indicator

5. Battery status indicator

It indicates the battery level of your BLE Alarm Clock
device. While the battery level drops below 20%, the
battery icon is in red status and a low battery warning
will pop up for to remind battery replacement.

Meanwhile, low battery indicator icon will shown on the
alarm clock LCD.

Above 60%

Between

20% ~ 60%

Warning

BLE Alarm clock:Battery level very low!

Below 20%

Please replace device batteries.

Setting the alarm time

6. Setting the alarm time

6.1 Each BLE Alarm Clock can set up maximum 5 Alams.
On the main screen. Tap individual alarm e.g. Alarm1 to
enter the alarm setting page

Alarm 1

6.2 The alarm setting screen appears. You can edit and
adjust different items on this screen, which include:
i) Alarm Name: Tap alarm 1- 5 to edit your preferred
name to this alarm.
ii) Time: Tap to adjust the time for this alarm.
iii) Day of Week: Tap to select which day of week to enable
the alarm.

- If none is selected, it will be as a once alarm.

- If all days are selected, it will be as a daily alarm.
iv) Sound pattern: Tap to select which tone pattern (5
patterns plus one random pattern available) is applied
to this alarm.

Setting the alarm time

v) Alarm volume level: Tap to select the alarm sound
volume level (three options: Low, Med and High).

6.3 Complete the alarm setting.

i) Tap [Done] to save the alarm setting and turn on the
alarm.
ii) At the main screen,user can turn the alarm on / off by
scrolling the right and left

On

Off

6.4 Stop the alarm via app.

i) When the alarm clock is alarming, you can enter the
alarm by tapping the notification on device.
ii) There is an “ ” icon at the right hand side of the row.
You can tap the “ ” icon to stop the alarm.

Snooze operation

7. Using the SNOOZE function

7.1 When the alarm sounds,
press the [Snooze] button
to get an extra 5 minutes
of sleep. The snooze will
repeat up to three times.

7.2 The above default value is
set by the factory. User can
set the “Maximum Snooze”
and “Snooze Duration” in
the preference screen.

To turn off the alarm

8. To disable the alarm

8.1 When the alarm sounds,
press the [Snooze] button
once or press [Alarm] to
disable the alarm.

8.2 The alarm will sound for
1 minute and stop
automatically. If Snooze
Enabled setting is ON,
the alarm will repeat
every 5 minutes. You can
press the [Snooze] button
to interrupt the alarm
momentarily, or can press
[Alarm] button to turn off
the alarm and stop the
snooze function

8.3 User can tap the alarm
time to disable the alarm
completely ( Please
make sure your app is
paired with the device)

completely.

Setting the Timer

9. To set the timer
Tap timer of main screen and go into timer screen.

9.1 You can edit and adjust items below on this screen.

i) Timer period:
Scroll to adjust the timer period.
ii) Sound pattern:
Tap to select the tone pattern (5 patterns plus one
random pattern available).
iii) Sound volume level:
Tap to select the sound volume level (three options:
Low, Med and High).

Setting the timer

9.2 Using the Timer
In the Home screen, you can tap “Start” under Timer to
start counting.

Then you can tap “Stop” to stop the current timer and
“Start” to re-continue the timer again. The timer can be
reset by tapping the [Reset].

Delete the BLE Alarm Clock record

10. Delete the BLE Alarm Clock record.

BLE Alarm Clock

You can tap the at
Nearby Devices screen to
enter the Known Devices
page. By tapping “Edit” and
then the , you can select
“Delete” to delete the BLE
Alarm Clock record on the
current device.

Preference

11) Preference setting

Tap the to enter the Preference screen. You can
edit and adjust the following items on this screen.

11.1 Snooze Enabled: Tap to select ON/OFF to enable
/disable the Snooze function. If 'Snooze Enabled is
ON, you will have two more options, which are:

Maximum Snoozes:The maximum number of times to
repeat the snooze function, which can be set to
Unlimited or values from 1 to 9.
Snooze Duration: The time interval between snooze
function, which can be set to values from 1 to 15
minutes.

Preference

11.2 Alarm Sound Duration: The alarm duration, which
can be set to values from 1 to 15 minutes.

11.3 Auto DST update: It will adjust Daylight Saving Time
(DST) automatically based on your device time zone
setting. The alarm clock will be automatically one hour
ahead of Standard Time in summer time and will be
back to the normal Standard Time when back to winter
time, according to your device’s time zone.

11.4 Scroll Display: Turn on to enable the LCD screen
switch automatically (screen detail please refer to
point 14)

11.5 Temperature: Select ˚C or ˚F

11.6 Time Format: Select 12 or 24 hour format

11.7 Date Format: Select MM / DD or DD/ MM
day format.

Reset the BLE Alarm Clock

12. Reset the BLE Alarm Clock

If the BLE Alarm Clock is not
working properly, try to press
RESET button to resume default

1) Pull down ip over stand to access battery compartment

2) Insert stand into the back case

1

1

2

2

setting. The LED flashes twice
in (purple) color, then the LED
will flash once per 6 seconds in
red color.

BLE Alarm Clock

After reset, all data in the BLE
Alarm Clock is deleted. Press
and hold the [PAIR] button again
to re-pair the BLE Alarm Clock.
If it has been paired previously
with the same device, you can
select “Restore” to resume all
setting and data or select
“Erase” to start all from scratch.

Temperature and Relative Humidity

Reset the BLE Alarm Clock

13. Current Temperature and Relative Humidity
(Conditions)

13.1 The unit can measure temperature and relative
humidity. The current temperature and humidity
reading will be shown on the App or you can browse it
on the BLE Alarm Clock LCD screen by pressing the
“Scroll” button.

Temperature and Relative Humidity

Reset the BLE Alarm Clock

13.2 The unit can accumulate temperature / humidity
reading up to 7 days. To read the data tap the
conditions then go into the historical chart showing
temperature / relative humidity reading by time and
date, including the maximum and minimum record of
each day. Number of historical record stored in app
can more than 7 days depends on your idevice
memory.

Note:
(Reset the unit will clear all memory stored in the unit
and the record in app after synchronization.

3:25 PM3:25 PM

Temperature and Relative Humidity

Reset the BLE Alarm Clock

13.3 Reading history chart without alarm clock connection
At the Nearby Devices page, you can tap the history
chart icon at the right hand side of the row to go to the
history chart page.

Scroll function

Reset the BLE Alarm C

14. You can press the [Scroll] button on the BLE Alarm
Clock to switch between different information manually.
Or you can press and hold the [Scroll] button to
enable/disable auto-scrolling display function.

14.1 The scrolling display will be in following order:

“Clock with calendar mode”

”Calendar Mode”

Scroll function

“Temperature and humidity with clock mode”

”Clock with alarm time mode”
(show if any alarm enabled)

TIMER mode
(only if the timer is running)

14.2 In auto-scrolling mode, each mode will stay
3 seconds and then switch to next display.

unit

BLE Alarm Clock

buzzer

Manufacturer reserves the right to update the contents

of this manual and App.

space

Disposal of Your Old Product

Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused. When
this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive
2002/96/EC.
Please inform yourself about the local separate collection
system for electrical and electronic products.

Please act according to your local rules and do not dispose of your
old products with your normal household waste. The correct disposal
of your old product will help prevent potential negative consequences
for the environment and human health.

Disposal of Flat Batteries / Accumulators

You, as the end user, are legally obliged (Battery Ordinance)
to return all flat batteries and rechargeable batteries.

Disposal in the household waste is prohibited.

“European Directive 2006/66/EC” Batteries, including
rechargeable batteries, which contain hazardous substances
are marked by symbols which indicate the prohibition of
disposal in the household waste.
The designations for the heavy metals concerned
are as follows:
Cd = cadmium, Hg = mercury, Pd = lead. You can return flat
batteries / rechargeable batteries free of charge to the
collection points in your community or anywhere where
batteries / rechargeable batteries are sold.

You thus fulfil your statutory obligations and help protect the
environment.

Caution

Replace only with the same or equivalent type of battery, please refer
to the engraved battery marks inside the battery compartment for the
correct battery polarity (+) and (-). Danger of explosion is possible if
battery is incorrectly replaced.

This product complies with the requirement of the 1999/5/EC directive.

Use this unit and mobile phone only in environments with ambient
temperatures between 0°C and 70°C.

The maximum operating temperature of the unit is 70°C

018-140077

BAC