,
Model: LCD1905E
USER S MANUAL
Please read this User Manual carefully to ensure the proper use of this product and
keep this manual for future reference
Contents
1 Safety and warnings...............................................................................2-6
2 Introduction...........................................................................................7
3 Installation............................................................................................8-13
4 Remote control......................................................................................14
5 Operation............................................................................................15-16
6 Trouble Shooting..................................................................................17
7 .......................................................Wall Mounting Holes Spacing and Location
Base Stand Disassemble Illustration
8 ..................................................................
18
18
-1-
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTION
1.Read these safety instructions.
2.Keep these safety instructions.
3.Heed all warnings.
4.Follow all safety instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturers
instructions.
8.Do not install near any heat sources such as radiators, heat registers,stoves, or other
apparatus (including
9.Do not defeat the safety purpose of the polarized or grounding type plug.A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide
If electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs
convenience receptacles, and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Unplug this apparatus during lightning storms or when unused for long periods of time.
13.Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into apparatus, the apparatus has been
exposed to rain or moisture , does not operate
14.Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases,
15.Splashing The apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, splashing and no objects filled with liquids such as vases, shall be
placed on the apparatus.
16.A warning that an apparatus with class I construction shall be connected to a MAINS
Socket outlet with a protective ear thing connection.
17.WARNINING:The battery (battery or batteries or battery pack)shall not be exposed
to excessive heat such as sunshine, fire or the like.
18.The mains plug is used as disconnect device, the disconnect device shall remain
readily operable.
amplifiers)that produce heat.
blade or the third prong are provided for your safety.
Normally, or has been dropped.
shall be placed on the apparatus. important safety instruction.
-2-
IMPORTANT SAFETY INSTRUCTION
This symbol indicates that this product incorporates double insulation between hazardous mains
voltage and user accessible parts. When servicing use only identical replacement parts.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or cords.
Correct Disposal of this product. This making indicates that this product should not be
disposed with other household wastes throughout the EU. To prevent possible harm
to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact the retailer where the product was
Purchased. They can take this product for environmental
Safe recycling.
CAUTION
RISK OFELECTRIC SHOCK
DO NOTOPEN!
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The symbol indicates that dangerous voltages constituting a risk of electric
shock are present within this unit.
The symbol indicates that there are important operating and maintenance
instructions in the literature accompanying this unit.
WARNING:
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
-3-
WARNINGS AND CAUTIONS
Warning
High voltages are used in the operation of this television
receiver.
Do not remove the cabinet back from your set Refer
servicing to qualified service personnel.
Warning
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Warning
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Caution
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Caution
Do not squash power supply cord under the
television receiver.
-4-
WARNINGS AND CAUTIONS
Caution
Never stand on, lean on, or suddenly push the television or its
stand. You should pay special attention to children. Serious
injury may result if it falls.
Caution
Do not place your television on an unstable cart, stand, shelf or
table.
Serious injury to an individual , and damage to the television,
may result If it falls.
Caution
When the television receiver is not used for an extended
period of time, it is advisable to disconnect the AC power cord
from the AC outlet.
Dim:515*320mm(
Caution
Avoid exposing the television receiver to direct sunlight and
other sources of the heat. Do not stand the television receiver
directly on other produces which give off heat. E.g. video
cassette players and audio amplifiers. Do not place naked
flame sources, such as lighted candles on the television.
Caution
If the television is to be built into a compartment or similar
enclosed, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and can
also be dangerous.
-5-
WARNINGS AND CAUTIONS
Thank you very much for purchasing this TV. To enjoy your product from the very
beginning, read this manual carefully and keep it handy for readyreference.
INSTALLATION
Locate the TV in the room wherelightdoesnotstrikethe screen .
directly
Total darkness or a reflection on the picture screen can cause eyestrain. Soft and
indirect lighting is recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid extremely warm locations to prevent possible damage to the cabinet or
premature component failure.
This TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect to a DC
supply or any other power supply.
Do not cover the ventilation openings when using theTV.
CAUTION
Never tamper with any components inside the TV, orany other adjustment controls not
mentioned in this manual. All LCD-TVs are high voltage instruments. When you clean
up dust or water drops on the LCD PANEL or CABINET, the power cord should be
pulled out from the receptacle, then wipe the TV with dried soft cloth. During thunder
and lightning, unplug the power cord and antenna cord to prevent damage to your TV.
All repairs to this TV should only be performed by the TV service personnel.
Warning: Change or modifications to this unit not expressly by the part responsible for
compliance could void the use's authority to operate the Equipment.
-6-
Main features
Used as Television,display terminal,PC display
High luminance,wide viewing angle
Can store 125 TV programs
Translucency OSD Auto-search
5
Full function Remote Control
48
300
800:1
NTSC-M
HDMI
VGA
A
INTRODUCTION
19
,NTSC-N
75
Note: AV means VIDEO INPUT
464
4.7
45
140
5
392
-7-
INSTALLATION
Accessories
Infrared Remote Control............
Users Manual........................
User s Manual........................
Battery(AAA)............................2
Side panel
1 SOURCE
Display the input source menu.
2 MENU
To display TV MENU.
3 CH+/CH-
In TV mode press CH+ or CH- to
change the channel up and down.
In MENU,press CH+ or CH- to
select items in MENU.
when TV is in standby mode, press
CH+orCH-buttoninTVcontrol
panel will power on the TV.
4 VOL+/VOL-
Adjust sound level.
In MENU,adjust the item that you
Selected.
Front panel
1
1
3
4
2
1
30 30
MUTE
SLEEP
CH
+
_
SOURCE
TVDISPLAY
TVSOURCE
RECALL
VGA
V-CHIPCC
YPbPr
1:Remote control sensor.
2:Indicator LED:GREEN POWER ON.
ASPECT
POWER
VOL
S.M
+
_
P.M
MENU
ENTER
3: (see next page).Control Panel
EXIT
123
456
7890
4: Power:Press this button to turn the unit
AUTO
TV AV HDMI
ON from STANDBY mode.
Press it again to turn the set back to
STANDBY.
RED STAND BY.
1
2
3
4
REAR AV Connection
100-240V~50/60Hz
ACINPUT
100-240V~50/60Hz
All the terminals are(from left to right):
AC INPUT,HDMI ,VGA ,AV,YPbPr,AUDIO INPUT,PCAUDIO INPUT ,ANTENNA
Note: 1.AV means INPUT
2.VIDEO and share one audio channel.
VIDEO
YPbPr
HDMIINPUT
VGAINPUT
Pb
Pr
YPbPr
INPUT
AUDIO
L
INPUT
R
Y
AV
PC
AUDIOINPUT
RF INPUT
-8-
ANTENNA
INSTALLATION
Note:
Aerial connections:IEC(female).
Input impendance:75 unbalanced.
-9-
PC
STEPS:
Be sure both the TV and computer are Power off.
1.Connect VGA and audio cable
2.Connect power cord
3.Power on the TV, switch to PC mode
4.Power on the PC
This sequence is very important.
* Please don't open the Cover
INSTALLATION
8
Pb
ACINPUT
100-240V~50/60Hz
HDMIINPUT
Pr
VGAINPUT
YPbPr
INPUT
Y
AV
Note: AV means VIDEO INPUT
PC
AUDIOINPUT
AUDIO
L
INPUT
R
RFINPUT
-10-
INSTALLATION
PC
PRESET MODE(recommended resolution is 1024*768@60Hz)
RESOLUTION
1
2
3
4
640*480
800*600
800*600
1024*768
V.Freq.(Hz) H.Freq.(KHz)
60
56
60
60
31.47
35.156
37.88
48.36
-11-
INSTALLATION
AV EQUIPMENT
This TV provides one group of AV ,COMPONENT for convenient connection to VCR,DVD or
other video equipment. Please refer to the owners manual of the equipment to be connected
as well.
VIDEO EQUIPMENT with COMPONENT
GBR
R
G
B
Pb
ACINPUT
100-240V~50/60Hz
HDMIINPUT
VGAINPUT
Pr
YPbPr
INPUT
AUDIO
L
INPUT
R
Y
AV
W
Y
R
PC
AUDIOINPUT
RF INPUT
HDMI
HDMI cable not included
To video
output
To audio
outputs
Y
W
R
Y
Yellow (video)
W
White(audio L)
R
Red(audio R or Pr)
B
Blue(Pb)
G
Green(Y)
VIDEO EQUIPMENT
Note: AV means VIDEO INPUT
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder,
video game or stereo system, etc.....
can support these video fomats:480i,576i,480p,576p,720p,1080i.YPbPr
-12-
BATTERY INSTALLATION
Insert Batteries Into the Remote Control
1. Remove the battery cover.
2. Insert the 2 AAA 1.5V batteries making sure the polarity (+ or -) of the batteries matches the
polarity marks Inside the unit.
3. Mount the battery cover.
Replace with new batteries when the TV set begins to show the following symptoms:
Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control
Unit.
12
3
Remark:
1) Alkaline Battery Recommended.
2) Remove batteries when they are exhausted or if the remote control is not to be used for a
long time.
-13-
REMOTE CONTROL
1
12
2
3
4
5
6
7
8
9
POWER
VOL
+
_
MENU
EXIT
ASPECT
S.M
P.M
ENTER
SLEEP
MUTE
CH
+
_
VOL-
SOURCE
TV DISPLAY
123
TV SOURCE
456
RECALL
7890
VGA
AUTO
TV
V-CHIPCC
AV
HDMI
YPbPr
REMOTE CONTROL
POWER
1:
To set the TV standby or on.
VOL+/-
2:
To adjust sound level.
10
MENU
3:
11
To display TV menu.
CURSOR
4:
13
To move within the menu.
EXIT
5:
Used to return to the previous menu or
14
exit menu.
15
NUMBER KEY
6: :
For direct access to program. For
a 2 (3) digit program number,
The second (third) digit must be
16
entered before the dash disappears.
Channel number will be displayed
for a few seconds.
17
AUTO
7:
Auto adjust in PC mode.
CC
8:
Display caption during closed caption
18
9:
Direct key to change input Source.
SLEEP
10:
SettimetoturnofftheTV
19
MUTE
11:
To disable or enable the sound.
ASPECT
12:
20
-14-
To change picture aspect
S.M
13:
To switch sound mode.
program.
21
14:
CH+/CH-
To access the next or previous
Program.
Menu.
.M
15: P
To switch picture mode.
SOURCE
16:
To display or exit TV input source
ENTER
17:
Confirms selection.
TV DISPLAY
18:
Displays/removes the program
Information
TV SOURCE
19:
To change TV SOURCE
[CABLE,AIR]
20
RECALL
To access the previously viewed
21
V-CHIP
Enter parent ctrl
1. PICTURE MENU
The first item of the MENU is picture menu.
You can adjust picture here,such as contrast,
brightness,etc.press to move,press
To select.
USER
PICTURE
MENU
EXIT
Ô
CONTRAST
BRIGHTNESS
HUE
SATURATION
SHARPNESS
PICTURE MODE
MOVE
SELECT
OPERATION
3.CHANNEL MENU
The third item of the MENU is channel menu
(Only in TV mode).You can complete
channel Search and setting here.
1.AUTO SCAN:Search all the channels
automatically.
2.ADD/ERASE:To skip the current channel
yesornot.
3.SOURCE:CABLE,AIR.
4.C.CAPTION:adjust c.c. Type.
5.PARENT CTRL: enter parent ctrl menu,
The default password is 6666.
COLOR TEMP
SCALE
MOVE
Note:
1
.Three color temperatures: NORMAL,
WARM,COOL.
2. Four picture modes: STANDARD,MOVIE,
VIVID,USER.
3.HUE is available in NTSC system only.
SELECT
PICTURE
NORMAL
169
16:9
MENU
EXIT
2.SOUND MENU
The second item of the MENU is SOUND
MENU.You can adjust sound here.
Press to move,press to adjust.
SOUND
SOUND MODE
BASS
TREBLE
BALANCE
MOVE
SELECT
USER
EXIT
MENU
AUTO SCAN
ADD/ERASE
SOURCE
C.CAPITION
PARENTCTRL
MOVE
SELECT
ADD
CABLE
OFF
MENU
EXIT
4.FUNCTION MENU
The fourth item of the MENU is function
menu.You can adjust settings below.
1.SLEEP TIMER:adjust sleep time
2.DNR: noise reduction
3.MEMORY RECALL: Reset all the
Settings to default value.
FUNCTION
SELECT
0
ON
MENU
EXIT
SLEEP TIMER
DNR
MEMORY RECALL
MOVE
-15-
PARENTAL CTRL
You can adjust setting below .
1.PASSWORD:you can change the
current PARENT CTRL password.
2.V-CHIP, you can turn off or
On it .
3.TV-RATING,you can enter TV rating
Menu to adjust.
SELECT
PARENT CTRL
OFF
MENU
EXIT
PASSWORD
V-CHIP
TV-RATING
MOVIE RATING
ENGLISH RATING
FRANCE RATING
MOVE
OPERATION
5.OSD MENU
The sixth item of the MENU is OSD
Menu.
OSD
SELECT
ENGLISH
1 TIMES
EXIT
MENU
LANGUAGE
H-POSITION
V-POSITION
DURATION
HALFTONE
OSD SIZE
MOVE
6.PC MENU
This MENU is available in PC only.
You can adjust the PC effect and position.
ALLFVVSL D
NONE
TV-Y
B
TV-Y7
B
TV-G
B
TV-PG
B
TV-14
B
B
TV-MA
ENTERKEY: BLOCK/ UNBLOCK
MOVE
Rating Content
TV-Y(All
children)
TV-Y7(Directto
orderchildren)
Suggested
TV-G(General
age
audience)
TV-PG(Parental
Guidance
suggested)
TV-14(Parents
strongly
cautioned)
TV-MA(Mature
audienceonly)
Use ENTER key to switch Block/ Unblock
feature.
Control
MPAA:switchthe movie-rating control level: N/A,
G, PG, PG-13,R,NC-17,X.
Rating
G Generalaudiences, AllAges admitted
PG
PG-13
Age
R
NC-17
X
PARENT CTRL
B
SELECT
B
B
B
FV
(Fantasy
violence)
B
B
B
B
B
B
B
B
MENU
EXIT
Content
L
V
(Violence)
S
(Sexual
situation)
(Adult
language)
D
(Sexually
suggestive
dialog)
X
X
X
X
X
X
X
X
X
X
X
X
Parental
Description
Parental Guidancesuggested. Some materialmay not be
Suitable forchildren.
Parents stronglycautioned. Some material.may be
Inappropriate forchildren under 13.
Restrict. Under17 requires accompanyingparent or adult
guardian(age variesin some jurisdictions)
No one 17 andunder admitted.
X is an orderrating that isunified with NC-17but may be
encoded inthe data oforder movies.
-16-
PC
16:9
Ô
EXIT
MENU
Ô
PC
EXIT
MENU
Ô
CONTRAST
BRIGHTNESS
H-POSITION
V-POSITION
CLOCK
PHASE
MOVE
COLOR TEMP
SCALE
Ô
AUTOADJUST
MOVE
SELECT
SELECT
Auto adjust in PC mode only.
Trouble shooting
Trouble phenomenon
Picture Audio
Snow Noise
Ghost
Interfere
Normal Picture
No picture Mute
No color Normal audio Color control.
Normal audio
Noise
Mute
Inspection
antenna position, direction
or connection.
antenna position, direction
or connection.
electronic equipment, car/
motorcycle, fluorescent light.
Volume(check whether the
mute function is on or sound
system are correct or not).
power cord is not connected.
power switch is not opened.
Press standby key on the remote
control to trying.
Scramble
No color
Normal audio
or weak
Noise
-17-
Search the channel again.
Audio system.
Wall Mounting Holes Spacing and Location
4 Screws
Base Stand Disassemble Illustration
How to remove the stand from the TV
1.Use the screwdriver to remove the screws
from the screw location.
-18-
1.Remove the base stand from the
Main body.
Loading...