|
IMPORTANT SAFETY INSTRUCTIONS
Thank you for choosing a Volta Vacuum Cleaner
from the Electrolux Group. To ensure total
satisfaction, read the instruction manual carefully.
Retain for reference.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS
BEFORE USING (THIS APPLIANCE)
When using an electrical appliance, basic precaution
should always be followed, including the following:
Before connecting the cleaner to an electrical supply
outlet ensure that the voltage marked on the rating
plate ( on the underside of the cleaner ) is correct
for your electrical supply. If it does not comply, do
not use the cleaner prior to contacting
the manufacturer.
WARNING – To reduce the risk of fire, electric
shock, or injury:
1. Do not leave vacuum cleaner when
plugged in. Unplug from outlet when not
in use and before servicing.
2. To reduce the risk of electric shock, do not
use outdoors or on wet surfaces.
3. Young children should be supervised to
ensure that they do not play with the
appliance. Close attention is necessary
when used near children.
4. The appliance is not intended for use by
young children or infirm persons
without supervision.
5. Use only as described in this manual.
Use only manufacturer’s
recommended attachments.
6. Do not use with damaged cord or plug. If the
vacuum cleaner is not working as it should,
has been dropped, damaged, left outdoors,
or dropped in water, enter it to a service
centre before using.
7. Do not pull or carry on cord, use as a handle.
Do not close door on cord, or pull around
sharp edges or corners. Do not run the
vacuum cleaner over cord. Keep cord away
from heated surfaces.
8. Do not unplug by pulling on the cord.
To unplug, grasp the plug, not the cord.
9. Do not handle the plug or vacuum cleaner
with wet hands.
10. Do not put any object into openings.
Do not use with any opening blocked.
Keep free of dust, lint, hair and anything
that may reduce airflow.
11. Keep hair, loose clothing, fingers and
all parts of body away from openings and
moving parts.
12.
Turn all controls off before unplugging.
13.
Use extra care when cleaning on stairs
14. Do not use to pick up flammable or
combustible liquids, such as gasoline, or
use in areas where they may be present.
15. Unplug before connecting the hose.
16. Do not pick up anything that is burning
or
smoking, such as cigarettes, matches, or
hot ashes.
17. Do not use without dust bag and/or filter
in place.
18. We recommend that you do not use your
vacuum cleaner on carpet cleaning foams, sharp
or heavy building materials, plaster dust bag or
talcum powders. These materials could damage
or clog the dust bag pores and cause failures to
other components in your vacuum cleaner and
render your warranty invalid.
19. Store your cleaner indoors in a cool, dry area.
20. Keep your work area well lighted.
21. It is recommended that before vacuuming other
electrical appliances they are switched off.
Young children should be supervised to ensure
that they do not play with the appliance. Close
attention is necessary when used near children.
.
SERVICE & REPAIR
It is dangerous to alter the specification or modify
the product in any way. Under no circumstances
should you attempt to repair the cleaner
yourself. Repairs undertaken by unauthorized or
inexperienced persons may cause injury and/or
serious malfunction and may void warranty.
NB! To avoid injury and prevent damage to the
machine, a defective lead must only be replaced by
an authorized Volta service provider approved by
the manufacturer to avoid hazard.
The cleaner should be serviced by an authorized
Volta service provider and only genuine Volta spare
parts should be used.
DOUBLE INSULATION
Your vacuum cleaner is double insulated. This means
that all external parts are electrically insulated from
the mains. This is done by placing insulation barriers
between the electrical and mechanical components,
making it unnecessary for the cleaner to be earthed.
1
|
PARTS IDENTIFICATION
VOLTA U3701 - U3702
3
4
1
10
6
1. Cloth Bag / Paper Dust Bag
2. Telescopic Extension Tube - U3702
Two Piece Tubeset - U3701 (Not pictured)
3. Hose
4. Hose bent end handle with suction control
5. Dual purpose Combination Floor Nozzle
8
2
7
9
5
6. Crevice Nozzle combination Dusting Brush,
located in the storage cavity at the rear of
the cleaner.
7. Variable suction control knob
8. Dust bag full indicator
9. Rewind Pedal
10. Switch On / Off Pedal
2
|
ASSEMBLING THE VACUUM CLEANER
BEFORE STARTING
5. Pull out the cable and plug it into the power
outlet. Remove the plug from the power outlet
1. Open the dust bag compartment lid.
by the plug not by the cable. When activating the
rewind pedal, guide the cable into the cleaner
with your hand to prevent it from whipping.
it from whipping.
2. Check that the dust bag is in place.
3. Insert the hose until the catch clicks to engage.
Grip the hose connection and press the catches
to disengage for removal.
4. Attach the extension tube to the bent end hose
handle and the floor nozzle.
6. Press the On / Off pedal with your hand to start
and stop the vacuum cleaner.
7. Adjust the suction power using the variable
power control knob on the vacuum cleaner or
the suction control on the hose bent end handle.
GETTING THE BEST RESULTS
Hard Floors
Use the dual purpose floor nozzle with the
pedal as shown.
3