Item
Model
ProjectName
T10E
The T10E vegetable peelers can be
considered basic equipment for
vegetable preparation. The peeling
process is key to guarantee good
preservation and high hygiene
throughout the food preparation
cycle. These models are designed
for abrasive peeling; for different
peeling functions, the proper plates
are available as optional
accessories.
601792+filter table
FEATURES
V The special abrasive material that covers the
removable rotating plate guarantees a high
quality finish to the peeled vegetables, with little
waste. Codes 603339 and 603340 also have the
abrasive material inside the cylinder.
V The level of noise produced by the units is
very low and the peels are reduced to small
pieces to facilitate the drainage process.
V These peelers can also be used for drying
vegetables or peeling onions or garlic.
V The safety and reliability of this appliance is
Peelers
guaranteed by its complete stainless steel
construction and by a series of devices which
safeguard the operator and the functioning of the
machine.
V The machine is constructed in stainless steel
and has a transparent lid which is made of a
special, damage-resistant plastic material which
allows complete visibility of the peeling cycle.
V The removable rotating plate is covered in a
special long durability abrasive vitreous material and
can be restored after extended use.
V Waterproof touch button control panel
incorporated on the machine including a reset button
and programmable timer.
V The touch button control panel has IP65
protection with low voltage level.
V A microswitch stops the machine from operating
when the lid is opened.
V Model 601834 is supplied with a knife plate.
V Water supply designed to serve as a spray for
cleaning the machine; the spray unit simply clips
onto the cover.
Specifications
MODEL
Capacity - kg 10 10 10 10 10
External dimensions - mm
width 440 440 440 440 440
depth 690 690 690 690 690
height 680 680 680 680 680
Scrubbing capacity - kg/h
tuber 300 300 300 380 380
Peeling capacity - kg/h
potatoes 300 300 300 380 380
Power - kW
installed-electric 0.37 0.37 0.37 0.37 0.37
Net weight - kg. 39 39 39 39 39
Supply voltage 220...240 V, 1N,
Abrasive Cylinder ✓ ✓
T10E1
601792
50/60
T10E324
601805
200...240/380...440
V, 3, 50/60
T10EK324
601834
200...240/380...440
V, 3, 50/60
T10E1C
603339
220...240 V, 1N,
50/60
T10E324C
603340
200...240/380...440
V, 3, 50/60