Electrolux SC385 LCD Instruction Manual

Beam Central Vacuum Systems

PLATINUM LCD

INSTRUCTION MANUAL

Read This Manual Thoroughly Before Use

MAIN SCREEN

The main screen is shown when the system is
connected to an electrical outlet. This is the
screen displayed in regular operations mode with full system
performance. The system performance plus local time and
temperature can be viewed from the Main Screen.

Along the bottom of the screen the following icons are
displayed from left to right, the Power( ) icon, the Left( ) and
Right( ) Toggle Arrow icons and the Enter ( ) icon. To
scroll through the LCD menus, the button directly below each

corresponding icon executes the navigational feature.

USER SETUP

Your LCD enabled power unit provides the ability to customize
the temperature,(Celcius or Fahrenheit) and time formats,(12­hour or 24-hour). Formats can be customized using the
USER SETUP menu. To enter the USER SETUP menu, press

the <Enter> button.

Temperature Customization

Use the Left and Right toggle buttons to select the
temperature format of either C or F. Once the correct format
has been selected, press the <Enter> button to proceed to the
next screen.

Time Format Customization

Use the Left and Right toggle arrows to select the temperature
format of either 12 or 24 hours. Once the correct format has
been selected, press the <Enter> button to proceed to the next
screen.

Time Setting

The time can be changed by using the Left and Right toggle
buttons. The  rst number  eld in the display is underlined with
a bar, indicating that it can be adjusted with the toggle buttons.
Press the <Enter> button to proceed to the next number  eld.

Review User Setup Settings

The next screen displays the temperature and time with the
user selected formats. Press the <Enter> button to return to
the Main Screen

Power Button

Toggle Buttons

Enter Button

SYSTEM CHECKS

The System Checks menu provides the ability to
monitor overall system performance. Speci c elements
monitored include the dirt receptacle level, air ow
performance, motor and electrical systems, and the need
for power unit service. The happy face indicates that
each monitored element of the power unit is performing
at optimal levels. Use the right and left toggle buttons
to scroll through the SYSTEM CHECK screens to view
each system monitoring element.

Main Screen

Dirt Receptacle and Happy Face

This display denotes that the dirt receptacle does NOT
currently need to be emptied.

Three to Five Performance Bars and Happy Face

This display indicates the system is performing at the
optimal air ow level. The power unit motor is operating
at optimum performance when all  ve power bars are
illuminated. Normal operating performance is when
three to  ve bars are shown. Performance levels
will decrease as the  lter is loaded with debris or as
the motor has signi cant wear. Fewer bars will be
illuminated as performance decreases.

When the power unit is off, the display will illuminate the
air ow level of the last operating cycle. Note: It is also
normal to see changes in performance when specialty
attachments are used.

Motor Icon and Happy Face

This display indicates all electrical and motor
components are functioning properly.

Telephone Icon and Happy Face

This screen indicates that the system has NOT
encountered any error conditions and it is NOT
necessary to call for service at this time.

System Run Time

This display shows you the overall number of hours that
the power unit has operated. It shows your total time of
vacuuming with the Beam system.